diff mbox

[v2,2/8] thermal: Provide stub for thermal_cdev_update() function

Message ID 1419265668-32283-3-git-send-email-l.majewski@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Lukasz Majewski Dec. 22, 2014, 4:27 p.m. UTC
Odroid U3 fan can work without being registered as OF cooling device
(with CONFIG_THERMAL_OF disabled).
In this situation it can be controlled via PWM entry at
/sys/class/hwmon/hwmon0/pwm1.

Therefore, the thermal_cdev_update() function needs a stub
to allow clean compilation.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
---
Changes for v2:
- New patch
---
 include/linux/thermal.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Comments

Eduardo Valentin Jan. 2, 2015, 6:40 p.m. UTC | #1
On Mon, Dec 22, 2014 at 05:27:42PM +0100, Lukasz Majewski wrote:
> Odroid U3 fan can work without being registered as OF cooling device
> (with CONFIG_THERMAL_OF disabled).
> In this situation it can be controlled via PWM entry at
> /sys/class/hwmon/hwmon0/pwm1.
> 
> Therefore, the thermal_cdev_update() function needs a stub
> to allow clean compilation.

I am not sure I understand what you are attempting to do here. What is
the relation that you see between CONFIG_OF_THERMAL and
thermal_cdev_update? 

> 
> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> ---
> Changes for v2:
> - New patch
> ---
>  include/linux/thermal.h | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> index 871123c..b3515b5 100644
> --- a/include/linux/thermal.h
> +++ b/include/linux/thermal.h
> @@ -332,6 +332,7 @@ struct thermal_cooling_device *
>  thermal_of_cooling_device_register(struct device_node *np,
>  				   char *type, void *devdata,
>  				   const struct thermal_cooling_device_ops *);
> +void thermal_cdev_update(struct thermal_cooling_device *);
>  #else
>  static inline struct thermal_zone_device *
>  thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
> @@ -353,6 +354,10 @@ thermal_of_cooling_device_register(struct device_node *np,
>  {
>  	return NULL;
>  }
> +
> +static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
> +{
> +}
>  #endif
>  struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
>  		void *, struct thermal_zone_device_ops *,
> @@ -375,7 +380,6 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp);
>  int get_tz_trend(struct thermal_zone_device *, int);
>  struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
>  		struct thermal_cooling_device *, int);
> -void thermal_cdev_update(struct thermal_cooling_device *);
>  void thermal_notify_framework(struct thermal_zone_device *, int);
>  
>  #ifdef CONFIG_NET
> -- 
> 2.0.0.rc2
>
Lukasz Majewski Jan. 14, 2015, 3:07 p.m. UTC | #2
Hi Eduardo,

> On Mon, Dec 22, 2014 at 05:27:42PM +0100, Lukasz Majewski wrote:
> > Odroid U3 fan can work without being registered as OF cooling device
> > (with CONFIG_THERMAL_OF disabled).
> > In this situation it can be controlled via PWM entry at
> > /sys/class/hwmon/hwmon0/pwm1.
> > 
> > Therefore, the thermal_cdev_update() function needs a stub
> > to allow clean compilation.
> 
> I am not sure I understand what you are attempting to do here. What is
> the relation that you see between CONFIG_OF_THERMAL and
> thermal_cdev_update? 

It should be CONFIG_THERMAL, not CONFIG_OF_THERMAL.

The thermal_cdev_update() is necessary since pwm-fan code can be
run without THERMAL subsystem (and such configuration is perfectly
valid).

> 
> > 
> > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> > ---
> > Changes for v2:
> > - New patch
> > ---
> >  include/linux/thermal.h | 6 +++++-
> >  1 file changed, 5 insertions(+), 1 deletion(-)
> > 
> > diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> > index 871123c..b3515b5 100644
> > --- a/include/linux/thermal.h
> > +++ b/include/linux/thermal.h
> > @@ -332,6 +332,7 @@ struct thermal_cooling_device *
> >  thermal_of_cooling_device_register(struct device_node *np,
> >  				   char *type, void *devdata,
> >  				   const struct
> > thermal_cooling_device_ops *); +void thermal_cdev_update(struct
> > thermal_cooling_device *); #else
> >  static inline struct thermal_zone_device *
> >  thermal_zone_of_sensor_register(struct device *dev, int id, void
> > *data, @@ -353,6 +354,10 @@
> > thermal_of_cooling_device_register(struct device_node *np, {
> >  	return NULL;
> >  }
> > +
> > +static inline void thermal_cdev_update(struct
> > thermal_cooling_device *cdev) +{
> > +}
> >  #endif
> >  struct thermal_zone_device *thermal_zone_device_register(const
> > char *, int, int, void *, struct thermal_zone_device_ops *,
> > @@ -375,7 +380,6 @@ int thermal_zone_get_temp(struct
> > thermal_zone_device *tz, unsigned long *temp); int
> > get_tz_trend(struct thermal_zone_device *, int); struct
> > thermal_instance *get_thermal_instance(struct thermal_zone_device
> > *, struct thermal_cooling_device *, int); -void
> > thermal_cdev_update(struct thermal_cooling_device *); void
> > thermal_notify_framework(struct thermal_zone_device *, int); 
> >  #ifdef CONFIG_NET
> > -- 
> > 2.0.0.rc2
> >
Eduardo Valentin Jan. 14, 2015, 6:28 p.m. UTC | #3
On Wed, Jan 14, 2015 at 04:07:53PM +0100, Lukasz Majewski wrote:
> Hi Eduardo,
> 
> > On Mon, Dec 22, 2014 at 05:27:42PM +0100, Lukasz Majewski wrote:
> > > Odroid U3 fan can work without being registered as OF cooling device
> > > (with CONFIG_THERMAL_OF disabled).
> > > In this situation it can be controlled via PWM entry at
> > > /sys/class/hwmon/hwmon0/pwm1.
> > > 
> > > Therefore, the thermal_cdev_update() function needs a stub
> > > to allow clean compilation.
> > 
> > I am not sure I understand what you are attempting to do here. What is
> > the relation that you see between CONFIG_OF_THERMAL and
> > thermal_cdev_update? 
> 
> It should be CONFIG_THERMAL, not CONFIG_OF_THERMAL.
> 
> The thermal_cdev_update() is necessary since pwm-fan code can be
> run without THERMAL subsystem (and such configuration is perfectly
> valid).

OK. Now I understand. Then, please resend this one using CONFIG_THERMAL.


Thanks,


Eduardo Valentin

> 
> > 
> > > 
> > > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> > > ---
> > > Changes for v2:
> > > - New patch
> > > ---
> > >  include/linux/thermal.h | 6 +++++-
> > >  1 file changed, 5 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> > > index 871123c..b3515b5 100644
> > > --- a/include/linux/thermal.h
> > > +++ b/include/linux/thermal.h
> > > @@ -332,6 +332,7 @@ struct thermal_cooling_device *
> > >  thermal_of_cooling_device_register(struct device_node *np,
> > >  				   char *type, void *devdata,
> > >  				   const struct
> > > thermal_cooling_device_ops *); +void thermal_cdev_update(struct
> > > thermal_cooling_device *); #else
> > >  static inline struct thermal_zone_device *
> > >  thermal_zone_of_sensor_register(struct device *dev, int id, void
> > > *data, @@ -353,6 +354,10 @@
> > > thermal_of_cooling_device_register(struct device_node *np, {
> > >  	return NULL;
> > >  }
> > > +
> > > +static inline void thermal_cdev_update(struct
> > > thermal_cooling_device *cdev) +{
> > > +}
> > >  #endif
> > >  struct thermal_zone_device *thermal_zone_device_register(const
> > > char *, int, int, void *, struct thermal_zone_device_ops *,
> > > @@ -375,7 +380,6 @@ int thermal_zone_get_temp(struct
> > > thermal_zone_device *tz, unsigned long *temp); int
> > > get_tz_trend(struct thermal_zone_device *, int); struct
> > > thermal_instance *get_thermal_instance(struct thermal_zone_device
> > > *, struct thermal_cooling_device *, int); -void
> > > thermal_cdev_update(struct thermal_cooling_device *); void
> > > thermal_notify_framework(struct thermal_zone_device *, int); 
> > >  #ifdef CONFIG_NET
> > > -- 
> > > 2.0.0.rc2
> > > 
> 
> 
> -- 
> Best regards,
> 
> Lukasz Majewski
> 
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
diff mbox

Patch

diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 871123c..b3515b5 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -332,6 +332,7 @@  struct thermal_cooling_device *
 thermal_of_cooling_device_register(struct device_node *np,
 				   char *type, void *devdata,
 				   const struct thermal_cooling_device_ops *);
+void thermal_cdev_update(struct thermal_cooling_device *);
 #else
 static inline struct thermal_zone_device *
 thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
@@ -353,6 +354,10 @@  thermal_of_cooling_device_register(struct device_node *np,
 {
 	return NULL;
 }
+
+static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
+{
+}
 #endif
 struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
 		void *, struct thermal_zone_device_ops *,
@@ -375,7 +380,6 @@  int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp);
 int get_tz_trend(struct thermal_zone_device *, int);
 struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
 		struct thermal_cooling_device *, int);
-void thermal_cdev_update(struct thermal_cooling_device *);
 void thermal_notify_framework(struct thermal_zone_device *, int);
 
 #ifdef CONFIG_NET