diff mbox

[RESEND,2/4] ARM: dts: Add lid GPIO key device node for Peach boards

Message ID 1420212257-22443-3-git-send-email-javier.martinez@collabora.co.uk (mailing list archive)
State New, archived
Headers show

Commit Message

Javier Martinez Canillas Jan. 2, 2015, 3:24 p.m. UTC
The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have both
a power and lid GPIO keys but only the former was defined in the
DTS. Add DTS snippets for the lid GPIO key too. These were taken
from the downstream ChromeOS 3.8 kernel tree.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
 arch/arm/boot/dts/exynos5420-peach-pit.dts | 18 +++++++++++++++++-
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 19 ++++++++++++++++++-
 2 files changed, 35 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 9a050e1..fa74a73 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -53,7 +53,7 @@ 
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq>;
+		pinctrl-0 = <&power_key_irq &lid_irq>;
 
 		power {
 			label = "Power";
@@ -61,6 +61,15 @@ 
 			linux,code = <KEY_POWER>;
 			gpio-key,wakeup;
 		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
 	};
 
 	memory {
@@ -658,6 +667,13 @@ 
 		samsung,pin-drv = <0>;
 	};
 
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <0>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index e8fdda8..d603e73 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -52,7 +52,7 @@ 
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq>;
+		pinctrl-0 = <&power_key_irq &lid_irq>;
 
 		power {
 			label = "Power";
@@ -60,6 +60,16 @@ 
 			linux,code = <KEY_POWER>;
 			gpio-key,wakeup;
 		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
 	};
 
 	memory {
@@ -646,6 +656,13 @@ 
 		samsung,pin-drv = <0>;
 	};
 
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <0>;