@@ -231,6 +231,20 @@
regulator-always-on;
};
+ ldo8_reg: ldo@8 {
+ regulator-compatible = "LDO8";
+ regulator-name = "VDD10_HDMI_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo10_reg: ldo@10 {
+ regulator-compatible = "LDO10";
+ regulator-name = "VDDQ_MIPIHSI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
ldo11_reg: LDO11 {
regulator-name = "VDD18_ABB1_1.8V";
regulator-min-microvolt = <1800000>;
@@ -390,6 +404,31 @@
ehci: ehci@12580000 {
status = "okay";
};
+
+ mixer: mixer@12C10000 {
+ status = "okay";
+ };
+
+ hdmi@12D00000 {
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ ddc = <&hdmi_ddc>;
+ status = "okay";
+ };
+
+ hdmi_ddc: i2c@13880000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
+ };
+
+ i2c@138E0000 {
+ status = "okay";
+ };
};
&pinctrl_1 {
@@ -404,4 +443,9 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd: hdmi-hpd {
+ samsung,pins = "gpx3-7";
+ samsung,pin-pud = <1>;
+ };
};
This patch adds nodes specific to Exynos4412 based Odroid X/X2/U2/U3 boards required for enabling HDMI display. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 44 +++++++++++++++++++++++++ 1 file changed, 44 insertions(+)