From patchwork Sat May 9 10:10:36 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Javier Martinez Canillas X-Patchwork-Id: 6368931 Return-Path: X-Original-To: patchwork-linux-samsung-soc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 6501DBEEE1 for ; Sat, 9 May 2015 10:12:32 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 8B0D22037E for ; Sat, 9 May 2015 10:12:29 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id EECEE20351 for ; Sat, 9 May 2015 10:12:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932406AbbEIKM0 (ORCPT ); Sat, 9 May 2015 06:12:26 -0400 Received: from bhuna.collabora.co.uk ([93.93.135.160]:40318 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932291AbbEIKMO (ORCPT ); Sat, 9 May 2015 06:12:14 -0400 Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: javier) with ESMTPSA id 202DB600E73 From: Javier Martinez Canillas To: Lee Jones Cc: Samuel Ortiz , Olof Johansson , Doug Anderson , Bill Richardson , Simon Glass , Gwendal Grignou , Stephen Barber , Filipe Brandenburger , Todd Broch , Alexandru M Stan , Heiko Stuebner , linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas Subject: [PATCH v2 05/10] mfd: cros_ec: rev cros_ec_commands.h Date: Sat, 9 May 2015 12:10:36 +0200 Message-Id: <1431166241-15775-6-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1431166241-15775-1-git-send-email-javier.martinez@collabora.co.uk> References: <1431166241-15775-1-git-send-email-javier.martinez@collabora.co.uk> Sender: linux-samsung-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Stephen Barber Update cros_ec_commands.h to the latest version in the EC firmware sources and add power domain and passthru commands. Also, update lightbar to use new command names. Signed-off-by: Stephen Barber Reviewed-by: Randall Spangler Signed-off-by: Javier Martinez Canillas Tested-by: Heiko Stuebner Reviewed-by: Gwendal Grignou Tested-by: Gwendal Grignou Acked-by: Lee Jones --- Changes since v1: - Added Gwendal Grignou and Heiko Stuebner Tested-by tags - Added Gwendal Grignou Reviewed-by tag - Added Lee Jones Acked-by tag --- drivers/platform/chrome/cros_ec_lightbar.c | 14 +- include/linux/mfd/cros_ec_commands.h | 277 ++++++++++++++++++++++++++--- 2 files changed, 262 insertions(+), 29 deletions(-) diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c index 560e5d41b7ae..6e1986a2dce1 100644 --- a/drivers/platform/chrome/cros_ec_lightbar.c +++ b/drivers/platform/chrome/cros_ec_lightbar.c @@ -197,8 +197,8 @@ static ssize_t brightness_store(struct device *dev, return -ENOMEM; param = (struct ec_params_lightbar *)msg->data; - param->cmd = LIGHTBAR_CMD_BRIGHTNESS; - param->brightness.num = val; + param->cmd = LIGHTBAR_CMD_SET_BRIGHTNESS; + param->set_brightness.num = val; ret = lb_throttle(); if (ret) goto exit; @@ -253,11 +253,11 @@ static ssize_t led_rgb_store(struct device *dev, struct device_attribute *attr, if (i == 4) { param = (struct ec_params_lightbar *)msg->data; - param->cmd = LIGHTBAR_CMD_RGB; - param->rgb.led = val[0]; - param->rgb.red = val[1]; - param->rgb.green = val[2]; - param->rgb.blue = val[3]; + param->cmd = LIGHTBAR_CMD_SET_RGB; + param->set_rgb.led = val[0]; + param->set_rgb.red = val[1]; + param->set_rgb.green = val[2]; + param->set_rgb.blue = val[3]; /* * Throttle only the first of every four transactions, * so that the user can update all four LEDs at once. diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index a49cd41feea7..13b630c10d4c 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -515,7 +515,7 @@ struct ec_host_response { /* * Notes on commands: * - * Each command is an 8-byte command value. Commands which take params or + * Each command is an 16-bit command value. Commands which take params or * return response data specify structs for that data. If no struct is * specified, the command does not input or output data, respectively. * Parameter/response length is implicit in the structs. Some underlying @@ -966,7 +966,7 @@ struct rgb_s { /* List of tweakable parameters. NOTE: It's __packed so it can be sent in a * host command, but the alignment is the same regardless. Keep it that way. */ -struct lightbar_params { +struct lightbar_params_v0 { /* Timing */ int32_t google_ramp_up; int32_t google_ramp_down; @@ -1000,32 +1000,81 @@ struct lightbar_params { struct rgb_s color[8]; /* 0-3 are Google colors */ } __packed; +struct lightbar_params_v1 { + /* Timing */ + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; + int32_t tap_tick_delay; + int32_t tap_display_time; + + /* Tap-for-battery params */ + uint8_t tap_pct_red; + uint8_t tap_pct_green; + uint8_t tap_seg_min_on; + uint8_t tap_seg_max_on; + uint8_t tap_seg_osc; + uint8_t tap_idx[3]; + + /* Oscillation */ + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ + + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ + + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; + + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +} __packed; + struct ec_params_lightbar { uint8_t cmd; /* Command (see enum lightbar_command) */ union { struct { /* no args */ - } dump, off, on, init, get_seq, get_params, version; + } dump, off, on, init, get_seq, get_params_v0, get_params_v1, + version, get_brightness, get_demo; - struct num { + struct { uint8_t num; - } brightness, seq, demo; + } set_brightness, seq, demo; - struct reg { + struct { uint8_t ctrl, reg, value; } reg; - struct rgb { + struct { uint8_t led, red, green, blue; - } rgb; + } set_rgb; + + struct { + uint8_t led; + } get_rgb; - struct lightbar_params set_params; + struct lightbar_params_v0 set_params_v0; + struct lightbar_params_v1 set_params_v1; }; } __packed; struct ec_response_lightbar { union { - struct dump { + struct { struct { uint8_t reg; uint8_t ic0; @@ -1033,20 +1082,26 @@ struct ec_response_lightbar { } vals[23]; } dump; - struct get_seq { + struct { uint8_t num; - } get_seq; + } get_seq, get_brightness, get_demo; - struct lightbar_params get_params; + struct lightbar_params_v0 get_params_v0; + struct lightbar_params_v1 get_params_v1; - struct version { + struct { uint32_t num; uint32_t flags; } version; struct { + uint8_t red, green, blue; + } get_rgb; + + struct { /* no return params */ - } off, on, init, brightness, seq, reg, rgb, demo, set_params; + } off, on, init, set_brightness, seq, reg, set_rgb, + demo, set_params_v0, set_params_v1; }; } __packed; @@ -1056,15 +1111,20 @@ enum lightbar_command { LIGHTBAR_CMD_OFF = 1, LIGHTBAR_CMD_ON = 2, LIGHTBAR_CMD_INIT = 3, - LIGHTBAR_CMD_BRIGHTNESS = 4, + LIGHTBAR_CMD_SET_BRIGHTNESS = 4, LIGHTBAR_CMD_SEQ = 5, LIGHTBAR_CMD_REG = 6, - LIGHTBAR_CMD_RGB = 7, + LIGHTBAR_CMD_SET_RGB = 7, LIGHTBAR_CMD_GET_SEQ = 8, LIGHTBAR_CMD_DEMO = 9, - LIGHTBAR_CMD_GET_PARAMS = 10, - LIGHTBAR_CMD_SET_PARAMS = 11, + LIGHTBAR_CMD_GET_PARAMS_V0 = 10, + LIGHTBAR_CMD_SET_PARAMS_V0 = 11, LIGHTBAR_CMD_VERSION = 12, + LIGHTBAR_CMD_GET_BRIGHTNESS = 13, + LIGHTBAR_CMD_GET_RGB = 14, + LIGHTBAR_CMD_GET_DEMO = 15, + LIGHTBAR_CMD_GET_PARAMS_V1 = 16, + LIGHTBAR_CMD_SET_PARAMS_V1 = 17, LIGHTBAR_NUM_CMDS }; @@ -1421,8 +1481,40 @@ struct ec_response_rtc { /*****************************************************************************/ /* Port80 log access */ +/* Maximum entries that can be read/written in a single command */ +#define EC_PORT80_SIZE_MAX 32 + /* Get last port80 code from previous boot */ #define EC_CMD_PORT80_LAST_BOOT 0x48 +#define EC_CMD_PORT80_READ 0x48 + +enum ec_port80_subcmd { + EC_PORT80_GET_INFO = 0, + EC_PORT80_READ_BUFFER, +}; + +struct ec_params_port80_read { + uint16_t subcmd; + union { + struct { + uint32_t offset; + uint32_t num_entries; + } read_buffer; + }; +} __packed; + +struct ec_response_port80_read { + union { + struct { + uint32_t writes; + uint32_t history_size; + uint32_t last_boot; + } get_info; + struct { + uint16_t codes[EC_PORT80_SIZE_MAX]; + } data; + }; +} __packed; struct ec_response_port80_last_boot { uint16_t code; @@ -1782,6 +1874,7 @@ struct ec_params_gpio_set { /* Get GPIO value */ #define EC_CMD_GPIO_GET 0x93 +/* Version 0 of input params and response */ struct ec_params_gpio_get { char name[32]; } __packed; @@ -1789,6 +1882,38 @@ struct ec_response_gpio_get { uint8_t val; } __packed; +/* Version 1 of input params and response */ +struct ec_params_gpio_get_v1 { + uint8_t subcmd; + union { + struct { + char name[32]; + } get_value_by_name; + struct { + uint8_t index; + } get_info; + }; +} __packed; + +struct ec_response_gpio_get_v1 { + union { + struct { + uint8_t val; + } get_value_by_name, get_count; + struct { + uint8_t val; + char name[32]; + uint32_t flags; + } get_info; + }; +} __packed; + +enum gpio_get_subcmd { + EC_GPIO_GET_BY_NAME = 0, + EC_GPIO_GET_COUNT = 1, + EC_GPIO_GET_INFO = 2, +}; + /*****************************************************************************/ /* I2C commands. Only available when flash write protect is unlocked. */ @@ -1857,13 +1982,21 @@ struct ec_params_charge_control { /*****************************************************************************/ /* - * Cut off battery power output if the battery supports. + * Cut off battery power immediately or after the host has shut down. * - * For unsupported battery, just don't implement this command and lets EC - * return EC_RES_INVALID_COMMAND. + * return EC_RES_INVALID_COMMAND if unsupported by a board/battery. + * EC_RES_SUCCESS if the command was successful. + * EC_RES_ERROR if the cut off command failed. */ + #define EC_CMD_BATTERY_CUT_OFF 0x99 +#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0) + +struct ec_params_battery_cutoff { + uint8_t flags; +} __packed; + /*****************************************************************************/ /* USB port mux control. */ @@ -2142,6 +2275,32 @@ struct ec_params_sb_wr_block { } __packed; /*****************************************************************************/ +/* Battery vendor parameters + * + * Get or set vendor-specific parameters in the battery. Implementations may + * differ between boards or batteries. On a set operation, the response + * contains the actual value set, which may be rounded or clipped from the + * requested value. + */ + +#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4 + +enum ec_battery_vendor_param_mode { + BATTERY_VENDOR_PARAM_MODE_GET = 0, + BATTERY_VENDOR_PARAM_MODE_SET, +}; + +struct ec_params_battery_vendor_param { + uint32_t param; + uint32_t value; + uint8_t mode; +} __packed; + +struct ec_response_battery_vendor_param { + uint32_t value; +} __packed; + +/*****************************************************************************/ /* System commands */ /* @@ -2338,6 +2497,80 @@ struct ec_params_reboot_ec { /*****************************************************************************/ /* + * PD commands + * + * These commands are for PD MCU communication. + */ + +/* EC to PD MCU exchange status command */ +#define EC_CMD_PD_EXCHANGE_STATUS 0x100 + +/* Status of EC being sent to PD */ +struct ec_params_pd_status { + int8_t batt_soc; /* battery state of charge */ +} __packed; + +/* Status of PD being sent back to EC */ +struct ec_response_pd_status { + int8_t status; /* PD MCU status */ + uint32_t curr_lim_ma; /* input current limit */ +} __packed; + +/* Set USB type-C port role and muxes */ +#define EC_CMD_USB_PD_CONTROL 0x101 + +enum usb_pd_control_role { + USB_PD_CTRL_ROLE_NO_CHANGE = 0, + USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */ + USB_PD_CTRL_ROLE_TOGGLE_OFF = 2, + USB_PD_CTRL_ROLE_FORCE_SINK = 3, + USB_PD_CTRL_ROLE_FORCE_SOURCE = 4, +}; + +enum usb_pd_control_mux { + USB_PD_CTRL_MUX_NO_CHANGE = 0, + USB_PD_CTRL_MUX_NONE = 1, + USB_PD_CTRL_MUX_USB = 2, + USB_PD_CTRL_MUX_DP = 3, + USB_PD_CTRL_MUX_DOCK = 4, + USB_PD_CTRL_MUX_AUTO = 5, +}; + +struct ec_params_usb_pd_control { + uint8_t port; + uint8_t role; + uint8_t mux; +} __packed; + +/*****************************************************************************/ +/* + * Passthru commands + * + * Some platforms have sub-processors chained to each other. For example. + * + * AP <--> EC <--> PD MCU + * + * The top 2 bits of the command number are used to indicate which device the + * command is intended for. Device 0 is always the device receiving the + * command; other device mapping is board-specific. + * + * When a device receives a command to be passed to a sub-processor, it passes + * it on with the device number set back to 0. This allows the sub-processor + * to remain blissfully unaware of whether the command originated on the next + * device up the chain, or was passed through from the AP. + * + * In the above example, if the AP wants to send command 0x0002 to the PD MCU, + * AP sends command 0x4002 to the EC + * EC sends command 0x0002 to the PD MCU + * EC forwards PD MCU response back to the AP + */ + +/* Offset and max command number for sub-device n */ +#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n)) +#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff) + +/*****************************************************************************/ +/* * Deprecated constants. These constants have been renamed for clarity. The * meaning and size has not changed. Programs that use the old names should * switch to the new names soon, as the old names may not be carried forward