diff mbox

[v5,8/9] mfd: cros_ec: spi: Add a DT property to delay asserting the CS

Message ID 1433336644-20532-9-git-send-email-javier.martinez@collabora.co.uk (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Javier Martinez Canillas June 3, 2015, 1:04 p.m. UTC 
From: Alexandru M Stan <amstan@chromium.org>

Some ECs need a little time for waking up before they can accept
SPI data at a high speed. Add a "google,cros-ec-spi-pre-delay"
property to the DT binding to configure this.

If this property isn't set, then no delay will be added. However,
if set it will cause a delay equal to the value passed to it to
be inserted at the beginning of a transaction.

Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
---

Changes since v4: None.

Changes since v3:
 - Split DT binding and driver change as suggested by Lee Jones.
 - Add tested-by tag from Heiko Stuebner
 - Add acked-by tag from Lee Jones.

Changes since v2: None

Changes since v1: None, new patch
---
 Documentation/devicetree/bindings/mfd/cros-ec.txt | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index dcf404d16067..e03a61c54954 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -18,6 +18,10 @@  Required properties (SPI):
 - reg: SPI chip select
 
 Optional properties (SPI):
+- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little
+  time to wake up from sleep before they can receive SPI transfers at a high
+  clock rate. This property specifies the delay, in usecs, between the
+  assertion of the CS to the start of the first clock pulse.
 - google,cros-ec-spi-msg-delay: Some implementations of the EC require some
   additional processing time in order to accept new transactions. If the delay
   between transactions is not long enough the EC may not be able to respond