@@ -24,44 +24,6 @@ config ARM_VEXPRESS_SPC_CPUFREQ
This add the CPUfreq driver support for Versatile Express
big.LITTLE platforms using SPC for power management.
-
-config ARM_EXYNOS_CPUFREQ
- tristate "SAMSUNG EXYNOS CPUfreq Driver"
- depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250
- depends on THERMAL
- help
- This adds the CPUFreq driver for Samsung EXYNOS platforms.
- Supported SoC versions are:
- Exynos4210, Exynos4212, Exynos4412, and Exynos5250.
-
- If in doubt, say N.
-
-config ARM_EXYNOS4X12_CPUFREQ
- bool "SAMSUNG EXYNOS4x12"
- depends on SOC_EXYNOS4212 || SOC_EXYNOS4412
- depends on ARM_EXYNOS_CPUFREQ
- default y
- help
- This adds the CPUFreq driver for Samsung EXYNOS4X12
- SoC (EXYNOS4212 or EXYNOS4412).
-
- If in doubt, say N.
-
-config ARM_EXYNOS_CPU_FREQ_BOOST_SW
- bool "EXYNOS Frequency Overclocking - Software"
- depends on ARM_EXYNOS_CPUFREQ && THERMAL
- select CPU_FREQ_BOOST_SW
- select EXYNOS_THERMAL
- help
- This driver supports software managed overclocking (BOOST).
- It allows usage of special frequencies for Samsung Exynos
- processors if thermal conditions are appropriate.
-
- It requires, for safe operation, thermal framework with properly
- defined trip points.
-
- If in doubt, say N.
-
config ARM_EXYNOS5440_CPUFREQ
tristate "SAMSUNG EXYNOS5440"
depends on SOC_EXYNOS5440
@@ -53,8 +53,6 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o
-arm-exynos-cpufreq-y := exynos-cpufreq.o
-arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o
deleted file mode 100644
@@ -1,236 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - CPU frequency scaling support for EXYNOS series
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
-#include <linux/cpufreq.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/cpu_cooling.h>
-#include <linux/cpu.h>
-
-#include "exynos-cpufreq.h"
-
-static struct exynos_dvfs_info *exynos_info;
-static struct thermal_cooling_device *cdev;
-static struct regulator *arm_regulator;
-static unsigned int locking_frequency;
-
-static int exynos_cpufreq_get_index(unsigned int freq)
-{
- struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
- struct cpufreq_frequency_table *pos;
-
- cpufreq_for_each_entry(pos, freq_table)
- if (pos->frequency == freq)
- break;
-
- if (pos->frequency == CPUFREQ_TABLE_END)
- return -EINVAL;
-
- return pos - freq_table;
-}
-
-static int exynos_cpufreq_scale(unsigned int target_freq)
-{
- struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
- unsigned int *volt_table = exynos_info->volt_table;
- struct cpufreq_policy *policy = cpufreq_cpu_get(0);
- unsigned int arm_volt, safe_arm_volt = 0;
- unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
- struct device *dev = exynos_info->dev;
- unsigned int old_freq;
- int index, old_index;
- int ret = 0;
-
- old_freq = policy->cur;
-
- /*
- * The policy max have been changed so that we cannot get proper
- * old_index with cpufreq_frequency_table_target(). Thus, ignore
- * policy and get the index from the raw frequency table.
- */
- old_index = exynos_cpufreq_get_index(old_freq);
- if (old_index < 0) {
- ret = old_index;
- goto out;
- }
-
- index = exynos_cpufreq_get_index(target_freq);
- if (index < 0) {
- ret = index;
- goto out;
- }
-
- /*
- * ARM clock source will be changed APLL to MPLL temporary
- * To support this level, need to control regulator for
- * required voltage level
- */
- if (exynos_info->need_apll_change != NULL) {
- if (exynos_info->need_apll_change(old_index, index) &&
- (freq_table[index].frequency < mpll_freq_khz) &&
- (freq_table[old_index].frequency < mpll_freq_khz))
- safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
- }
- arm_volt = volt_table[index];
-
- /* When the new frequency is higher than current frequency */
- if ((target_freq > old_freq) && !safe_arm_volt) {
- /* Firstly, voltage up to increase frequency */
- ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
- if (ret) {
- dev_err(dev, "failed to set cpu voltage to %d\n",
- arm_volt);
- return ret;
- }
- }
-
- if (safe_arm_volt) {
- ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
- safe_arm_volt);
- if (ret) {
- dev_err(dev, "failed to set cpu voltage to %d\n",
- safe_arm_volt);
- return ret;
- }
- }
-
- exynos_info->set_freq(old_index, index);
-
- /* When the new frequency is lower than current frequency */
- if ((target_freq < old_freq) ||
- ((target_freq > old_freq) && safe_arm_volt)) {
- /* down the voltage after frequency change */
- ret = regulator_set_voltage(arm_regulator, arm_volt,
- arm_volt);
- if (ret) {
- dev_err(dev, "failed to set cpu voltage to %d\n",
- arm_volt);
- goto out;
- }
- }
-
-out:
- cpufreq_cpu_put(policy);
-
- return ret;
-}
-
-static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
-{
- return exynos_cpufreq_scale(exynos_info->freq_table[index].frequency);
-}
-
-static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- policy->clk = exynos_info->cpu_clk;
- policy->suspend_freq = locking_frequency;
- return cpufreq_generic_init(policy, exynos_info->freq_table, 100000);
-}
-
-static struct cpufreq_driver exynos_driver = {
- .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = exynos_target,
- .get = cpufreq_generic_get,
- .init = exynos_cpufreq_cpu_init,
- .name = "exynos_cpufreq",
- .attr = cpufreq_generic_attr,
-#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW
- .boost_supported = true,
-#endif
-#ifdef CONFIG_PM
- .suspend = cpufreq_generic_suspend,
-#endif
-};
-
-static int exynos_cpufreq_probe(struct platform_device *pdev)
-{
- struct device_node *cpu0;
- int ret = -EINVAL;
-
- exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL);
- if (!exynos_info)
- return -ENOMEM;
-
- exynos_info->dev = &pdev->dev;
-
- if (of_machine_is_compatible("samsung,exynos4212")) {
- exynos_info->type = EXYNOS_SOC_4212;
- ret = exynos4x12_cpufreq_init(exynos_info);
- } else if (of_machine_is_compatible("samsung,exynos4412")) {
- exynos_info->type = EXYNOS_SOC_4412;
- ret = exynos4x12_cpufreq_init(exynos_info);
- } else {
- pr_err("%s: Unknown SoC type\n", __func__);
- ret = -ENODEV;
- }
-
- if (ret)
- goto err_vdd_arm;
-
- if (exynos_info->set_freq == NULL) {
- dev_err(&pdev->dev, "No set_freq function (ERR)\n");
- ret = -EINVAL;
- goto err_vdd_arm;
- }
-
- arm_regulator = regulator_get(NULL, "vdd_arm");
- if (IS_ERR(arm_regulator)) {
- dev_err(&pdev->dev, "failed to get resource vdd_arm\n");
- ret = -EINVAL;
- goto err_vdd_arm;
- }
-
- /* Done here as we want to capture boot frequency */
- locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000;
-
- ret = cpufreq_register_driver(&exynos_driver);
- if (ret)
- goto err_cpufreq_reg;
-
- cpu0 = of_get_cpu_node(0, NULL);
- if (!cpu0) {
- pr_err("failed to find cpu0 node\n");
- return 0;
- }
-
- if (of_find_property(cpu0, "#cooling-cells", NULL)) {
- cdev = of_cpufreq_cooling_register(cpu0,
- cpu_present_mask);
- if (IS_ERR(cdev))
- pr_err("running cpufreq without cooling device: %ld\n",
- PTR_ERR(cdev));
- }
-
- return 0;
-
-err_cpufreq_reg:
- dev_err(&pdev->dev, "failed to register cpufreq driver\n");
- regulator_put(arm_regulator);
-err_vdd_arm:
- kfree(exynos_info);
- return ret;
-}
-
-static struct platform_driver exynos_cpufreq_platdrv = {
- .driver = {
- .name = "exynos-cpufreq",
- },
- .probe = exynos_cpufreq_probe,
-};
-module_platform_driver(exynos_cpufreq_platdrv);
deleted file mode 100644
@@ -1,72 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - CPUFreq support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum cpufreq_level_index {
- L0, L1, L2, L3, L4,
- L5, L6, L7, L8, L9,
- L10, L11, L12, L13, L14,
- L15, L16, L17, L18, L19,
- L20,
-};
-
-enum exynos_soc_type {
- EXYNOS_SOC_4212,
- EXYNOS_SOC_4412,
-};
-
-#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
- { \
- .freq = (f) * 1000, \
- .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \
- (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \
- .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \
- .mps = ((m) << 16 | (p) << 8 | (s)), \
- }
-
-struct apll_freq {
- unsigned int freq;
- u32 clk_div_cpu0;
- u32 clk_div_cpu1;
- u32 mps;
-};
-
-struct exynos_dvfs_info {
- enum exynos_soc_type type;
- struct device *dev;
- unsigned long mpll_freq_khz;
- unsigned int pll_safe_idx;
- struct clk *cpu_clk;
- unsigned int *volt_table;
- struct cpufreq_frequency_table *freq_table;
- void (*set_freq)(unsigned int, unsigned int);
- bool (*need_apll_change)(unsigned int, unsigned int);
- void __iomem *cmu_regs;
-};
-
-#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ
-extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
-#else
-static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
-{
- return -EOPNOTSUPP;
-}
-#endif
-
-#define EXYNOS4_CLKSRC_CPU 0x14200
-#define EXYNOS4_CLKMUX_STATCPU 0x14400
-
-#define EXYNOS4_CLKDIV_CPU 0x14500
-#define EXYNOS4_CLKDIV_CPU1 0x14504
-#define EXYNOS4_CLKDIV_STATCPU 0x14600
-#define EXYNOS4_CLKDIV_STATCPU1 0x14604
-
-#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16)
-#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
deleted file mode 100644
@@ -1,236 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4X12 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-static struct exynos_dvfs_info *cpufreq;
-
-static unsigned int exynos4x12_volt_table[] = {
- 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
- 1000000, 987500, 975000, 950000, 925000, 900000, 900000
-};
-
-static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
- {CPUFREQ_BOOST_FREQ, L0, 1500 * 1000},
- {0, L1, 1400 * 1000},
- {0, L2, 1300 * 1000},
- {0, L3, 1200 * 1000},
- {0, L4, 1100 * 1000},
- {0, L5, 1000 * 1000},
- {0, L6, 900 * 1000},
- {0, L7, 800 * 1000},
- {0, L8, 700 * 1000},
- {0, L9, 600 * 1000},
- {0, L10, 500 * 1000},
- {0, L11, 400 * 1000},
- {0, L12, 300 * 1000},
- {0, L13, 200 * 1000},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq *apll_freq_4x12;
-
-static struct apll_freq apll_freq_4212[] = {
- /*
- * values:
- * freq
- * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
- * clock divider for COPY, HPM, RESERVED
- * PLL M, P, S
- */
- APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0),
- APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0),
- APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0),
- APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0),
- APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0),
- APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0),
- APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0),
- APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1),
- APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1),
- APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1),
- APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1),
- APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2),
-};
-
-static struct apll_freq apll_freq_4412[] = {
- /*
- * values:
- * freq
- * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
- * clock divider for COPY, HPM, CORES
- * PLL M, P, S
- */
- APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0),
- APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0),
- APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0),
- APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0),
- APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0),
- APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0),
- APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0),
- APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1),
- APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1),
- APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1),
- APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1),
- APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2),
-};
-
-static void exynos4x12_set_clkdiv(unsigned int div_index)
-{
- unsigned int tmp;
-
- /* Change Divider - CPU0 */
-
- tmp = apll_freq_4x12[div_index].clk_div_cpu0;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
-
- while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU)
- & 0x11111111)
- cpu_relax();
-
- /* Change Divider - CPU1 */
- tmp = apll_freq_4x12[div_index].clk_div_cpu1;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
-
- do {
- cpu_relax();
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
- } while (tmp != 0x0);
-}
-
-static void exynos4x12_set_apll(unsigned int index)
-{
- unsigned int tmp, freq = apll_freq_4x12[index].freq;
-
- /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
- clk_set_parent(moutcore, mout_mpll);
-
- do {
- cpu_relax();
- tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
- >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
- tmp &= 0x7;
- } while (tmp != 0x2);
-
- clk_set_rate(mout_apll, freq * 1000);
-
- /* MUX_CORE_SEL = APLL */
- clk_set_parent(moutcore, mout_apll);
-
- do {
- cpu_relax();
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
- tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
- } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
-}
-
-static void exynos4x12_set_frequency(unsigned int old_index,
- unsigned int new_index)
-{
- if (old_index > new_index) {
- exynos4x12_set_clkdiv(new_index);
- exynos4x12_set_apll(new_index);
- } else if (old_index < new_index) {
- exynos4x12_set_apll(new_index);
- exynos4x12_set_clkdiv(new_index);
- }
-}
-
-int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
-{
- struct device_node *np;
- unsigned long rate;
-
- /*
- * HACK: This is a temporary workaround to get access to clock
- * controller registers directly and remove static mappings and
- * dependencies on platform headers. It is necessary to enable
- * Exynos multi-platform support and will be removed together with
- * this whole driver as soon as Exynos gets migrated to use
- * cpufreq-dt driver.
- */
- np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
- if (!np) {
- pr_err("%s: failed to find clock controller DT node\n",
- __func__);
- return -ENODEV;
- }
-
- info->cmu_regs = of_iomap(np, 0);
- if (!info->cmu_regs) {
- pr_err("%s: failed to map CMU registers\n", __func__);
- return -EFAULT;
- }
-
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- moutcore = clk_get(NULL, "moutcore");
- if (IS_ERR(moutcore))
- goto err_moutcore;
-
- mout_mpll = clk_get(NULL, "mout_mpll");
- if (IS_ERR(mout_mpll))
- goto err_mout_mpll;
-
- rate = clk_get_rate(mout_mpll) / 1000;
-
- mout_apll = clk_get(NULL, "mout_apll");
- if (IS_ERR(mout_apll))
- goto err_mout_apll;
-
- if (info->type == EXYNOS_SOC_4212)
- apll_freq_4x12 = apll_freq_4212;
- else
- apll_freq_4x12 = apll_freq_4412;
-
- info->mpll_freq_khz = rate;
- /* 800Mhz */
- info->pll_safe_idx = L7;
- info->cpu_clk = cpu_clk;
- info->volt_table = exynos4x12_volt_table;
- info->freq_table = exynos4x12_freq_table;
- info->set_freq = exynos4x12_set_frequency;
-
- cpufreq = info;
-
- return 0;
-
-err_mout_apll:
- clk_put(mout_mpll);
-err_mout_mpll:
- clk_put(moutcore);
-err_moutcore:
- clk_put(cpu_clk);
-
- pr_debug("%s: failed initialization\n", __func__);
- return -EINVAL;
-}