| Message ID | 1440993365-26896-1-git-send-email-k.kozlowski@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Krzysztof, The patch looks good to me, I just have one small comment. On 08/31/2015 05:56 AM, Krzysztof Kozlowski wrote: > Add Hardkernel Odroid XU4 board Device Tree sources. The board differs > from Odroid XU3 and XU3-Lite by: > 1. No green and red leds (except standard red power led). > 2. No audio codec. > 3. Two USB3 ports in host mode (no micro USB3 connector for OTG). > 4. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). > 5. Additional connector with IO ports (I2S_0, I2C_5). > 6. No DisplayPort. > 7. No TI INA231 power measurement sensors. > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 56 ++++++++++++++ > arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 90 +--------------------- > arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 52 +++++++++++++ > arch/arm/boot/dts/exynos5422-odroidxu3.dts | 52 +++++++++++++ > arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 ++++++++++++ > 6 files changed, 210 insertions(+), 89 deletions(-) > create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 233159d2eaab..3d27fe34647f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ > exynos5420-smdk5420.dtb \ > exynos5422-odroidxu3.dtb \ > exynos5422-odroidxu3-lite.dtb \ > + exynos5422-odroidxu4.dtb \ > exynos5440-sd5v1.dtb \ > exynos5440-ssdk5440.dtb \ > exynos5800-peach-pi.dtb > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > new file mode 100644 > index 000000000000..eee16a820484 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > @@ -0,0 +1,56 @@ > +/* > + * Hardkernel Odroid XU3 Audio Codec device tree source > + * > + * Copyright (c) 2015 Krzysztof Kozlowski > + * Copyright (c) 2014 Collabora Ltd. > + * Copyright (c) 2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/ { > + sound: sound { > + compatible = "simple-audio-card"; > + > + simple-audio-card,name = "Odroid-XU3"; > + simple-audio-card,widgets = > + "Headphone", "Headphone Jack", > + "Speakers", "Speakers"; > + simple-audio-card,routing = > + "Headphone Jack", "HPL", > + "Headphone Jack", "HPR", > + "Headphone Jack", "MICBIAS", > + "IN1", "Headphone Jack", > + "Speakers", "SPKL", > + "Speakers", "SPKR"; > + > + simple-audio-card,format = "i2s"; > + simple-audio-card,bitclock-master = <&link0_codec>; > + simple-audio-card,frame-master = <&link0_codec>; > + > + simple-audio-card,cpu { > + sound-dai = <&i2s0 0>; > + system-clock-frequency = <19200000>; > + }; > + > + link0_codec: simple-audio-card,codec { > + sound-dai = <&max98090>; > + clocks = <&i2s0 CLK_I2S_CDCLK>; > + }; > + }; > +}; > + > +&hsi2c_5 { > + max98090: max98090@10 { > + compatible = "maxim,max98090"; > + reg = <0x10>; > + interrupt-parent = <&gpx3>; > + interrupts = <2 0>; > + clocks = <&i2s0 CLK_I2S_CDCLK>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > + }; Shouldn't this node also include the status = "okay" ? > +}; > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > index dd8bc86d9de4..52c34d8e791f 100644 > --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > @@ -46,70 +46,6 @@ > reset-gpios = <&gpd1 0 1>; > }; > > - pwmleds { > - compatible = "pwm-leds"; > - > - greenled { > - label = "green:mmc0"; > - pwms = <&pwm 1 2000000 0>; > - pwm-names = "pwm1"; > - /* > - * Green LED is much brighter than the others > - * so limit its max brightness > - */ > - max_brightness = <127>; > - linux,default-trigger = "mmc0"; > - }; > - > - blueled { > - label = "blue:heartbeat"; > - pwms = <&pwm 2 2000000 0>; > - pwm-names = "pwm2"; > - max_brightness = <255>; > - linux,default-trigger = "heartbeat"; > - }; > - }; > - > - gpioleds { > - compatible = "gpio-leds"; > - redled { > - label = "red:microSD"; > - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; > - default-state = "off"; > - linux,default-trigger = "mmc1"; > - }; > - }; > - > - sound: sound { > - compatible = "simple-audio-card"; > - > - simple-audio-card,name = "Odroid-XU3"; > - simple-audio-card,widgets = > - "Headphone", "Headphone Jack", > - "Speakers", "Speakers"; > - simple-audio-card,routing = > - "Headphone Jack", "HPL", > - "Headphone Jack", "HPR", > - "Headphone Jack", "MICBIAS", > - "IN1", "Headphone Jack", > - "Speakers", "SPKL", > - "Speakers", "SPKR"; > - > - simple-audio-card,format = "i2s"; > - simple-audio-card,bitclock-master = <&link0_codec>; > - simple-audio-card,frame-master = <&link0_codec>; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s0 0>; > - system-clock-frequency = <19200000>; > - }; > - > - link0_codec: simple-audio-card,codec { > - sound-dai = <&max98090>; > - clocks = <&i2s0 CLK_I2S_CDCLK>; > - }; > - }; > - > fan0: pwm-fan { > compatible = "pwm-fan"; > pwms = <&pwm 0 20972 0>; > @@ -378,15 +314,6 @@ > > &hsi2c_5 { > status = "okay"; since I believe for the Odroid XU4 we would like this to be disabled. The only I2C device in this I2C bus is the max98090 codec which is not present in the XU4. > - max98090: max98090@10 { > - compatible = "maxim,max98090"; > - reg = <0x10>; > - interrupt-parent = <&gpx3>; > - interrupts = <2 0>; > - clocks = <&i2s0 CLK_I2S_CDCLK>; > - clock-names = "mclk"; > - #sound-dai-cells = <0>; > - }; > }; > > &i2c_2 { > @@ -464,19 +391,6 @@ > }; > }; > > -&pwm { > - /* > - * PWM 0 -- fan > - * PWM 1 -- Green LED > - * PWM 2 -- Blue LED > - * PWM 3 -- on MIPI connector for backlight > - */ > - pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; > - pinctrl-names = "default"; > - samsung,pwm-outputs = <0>; > - status = "okay"; > -}; > - > &tmu_cpu0 { > vtmu-supply = <&ldo7_reg>; > status = "okay"; > @@ -512,9 +426,7 @@ > dr_mode = "host"; > }; > > -&usbdrd_dwc3_1 { > - dr_mode = "otg"; > -}; > +/* usbdrd_dwc3_1 mode customized in each board */ > > &usbdrd3_0 { > vdd33-supply = <&ldo9_reg>; > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts > index c06882bbb822..379cd61178ee 100644 > --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts > @@ -13,8 +13,60 @@ > > /dts-v1/; > #include "exynos5422-odroidxu3-common.dtsi" > +#include "exynos5422-odroidxu3-audio.dtsi" > > / { > model = "Hardkernel Odroid XU3 Lite"; > compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; > + > + pwmleds { > + compatible = "pwm-leds"; > + > + greenled { > + label = "green:mmc0"; > + pwms = <&pwm 1 2000000 0>; > + pwm-names = "pwm1"; > + /* > + * Green LED is much brighter than the others > + * so limit its max brightness > + */ > + max_brightness = <127>; > + linux,default-trigger = "mmc0"; > + }; > + > + blueled { > + label = "blue:heartbeat"; > + pwms = <&pwm 2 2000000 0>; > + pwm-names = "pwm2"; > + max_brightness = <255>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + gpioleds { > + compatible = "gpio-leds"; > + redled { > + label = "red:microSD"; > + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + linux,default-trigger = "mmc1"; > + }; > + }; > +}; > + > +&pwm { > + /* > + * PWM 0 -- fan > + * PWM 1 -- Green LED > + * PWM 2 -- Blue LED > + * PWM 3 -- on MIPI connector for backlight > + */ > + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; > + pinctrl-names = "default"; > + samsung,pwm-outputs = <0>; > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + dr_mode = "otg"; > }; > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts > index 78e6a502f320..c7509690131d 100644 > --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts > @@ -12,10 +12,45 @@ > > /dts-v1/; > #include "exynos5422-odroidxu3-common.dtsi" > +#include "exynos5422-odroidxu3-audio.dtsi" > > / { > model = "Hardkernel Odroid XU3"; > compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; > + > + pwmleds { > + compatible = "pwm-leds"; > + > + greenled { > + label = "green:mmc0"; > + pwms = <&pwm 1 2000000 0>; > + pwm-names = "pwm1"; > + /* > + * Green LED is much brighter than the others > + * so limit its max brightness > + */ > + max_brightness = <127>; > + linux,default-trigger = "mmc0"; > + }; > + > + blueled { > + label = "blue:heartbeat"; > + pwms = <&pwm 2 2000000 0>; > + pwm-names = "pwm2"; > + max_brightness = <255>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + gpioleds { > + compatible = "gpio-leds"; > + redled { > + label = "red:microSD"; > + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + linux,default-trigger = "mmc1"; > + }; > + }; > }; > > &i2c_0 { > @@ -49,3 +84,20 @@ > shunt-resistor = <10000>; > }; > }; > + > +&pwm { > + /* > + * PWM 0 -- fan > + * PWM 1 -- Green LED > + * PWM 2 -- Blue LED > + * PWM 3 -- on MIPI connector for backlight > + */ > + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; > + pinctrl-names = "default"; > + samsung,pwm-outputs = <0>; > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + dr_mode = "otg"; > +}; > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts > new file mode 100644 > index 000000000000..087c485b6084 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts > @@ -0,0 +1,48 @@ > +/* > + * Hardkernel Odroid XU4 board device tree source > + * > + * Copyright (c) 2015 Krzysztof Kozlowski > + * Copyright (c) 2014 Collabora Ltd. > + * Copyright (c) 2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/dts-v1/; > +#include "exynos5422-odroidxu3-common.dtsi" > + > +/ { > + model = "Hardkernel Odroid XU4"; > + compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \ > + "samsung,exynos5"; > + > + pwmleds { > + compatible = "pwm-leds"; > + > + blueled { > + label = "blue:heartbeat"; > + pwms = <&pwm 2 2000000 0>; > + pwm-names = "pwm2"; > + max_brightness = <255>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > +}; > + > +&pwm { > + /* > + * PWM 0 -- fan > + * PWM 2 -- Blue LED > + */ > + pinctrl-0 = <&pwm0_out &pwm2_out>; > + pinctrl-names = "default"; > + samsung,pwm-outputs = <0>; > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + dr_mode = "host"; > +}; > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Best regards,
W dniu 01.09.2015 o 17:48, Javier Martinez Canillas pisze: > Hello Krzysztof, > > The patch looks good to me, I just have one small comment. > > On 08/31/2015 05:56 AM, Krzysztof Kozlowski wrote: >> Add Hardkernel Odroid XU4 board Device Tree sources. The board differs >> from Odroid XU3 and XU3-Lite by: >> 1. No green and red leds (except standard red power led). >> 2. No audio codec. >> 3. Two USB3 ports in host mode (no micro USB3 connector for OTG). >> 4. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). >> 5. Additional connector with IO ports (I2S_0, I2C_5). >> 6. No DisplayPort. >> 7. No TI INA231 power measurement sensors. >> >> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 56 ++++++++++++++ >> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 90 +--------------------- >> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 52 +++++++++++++ >> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 52 +++++++++++++ >> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 ++++++++++++ >> 6 files changed, 210 insertions(+), 89 deletions(-) >> create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 233159d2eaab..3d27fe34647f 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ >> exynos5420-smdk5420.dtb \ >> exynos5422-odroidxu3.dtb \ >> exynos5422-odroidxu3-lite.dtb \ >> + exynos5422-odroidxu4.dtb \ >> exynos5440-sd5v1.dtb \ >> exynos5440-ssdk5440.dtb \ >> exynos5800-peach-pi.dtb >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> new file mode 100644 >> index 000000000000..eee16a820484 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> @@ -0,0 +1,56 @@ >> +/* >> + * Hardkernel Odroid XU3 Audio Codec device tree source >> + * >> + * Copyright (c) 2015 Krzysztof Kozlowski >> + * Copyright (c) 2014 Collabora Ltd. >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +/ { >> + sound: sound { >> + compatible = "simple-audio-card"; >> + >> + simple-audio-card,name = "Odroid-XU3"; >> + simple-audio-card,widgets = >> + "Headphone", "Headphone Jack", >> + "Speakers", "Speakers"; >> + simple-audio-card,routing = >> + "Headphone Jack", "HPL", >> + "Headphone Jack", "HPR", >> + "Headphone Jack", "MICBIAS", >> + "IN1", "Headphone Jack", >> + "Speakers", "SPKL", >> + "Speakers", "SPKR"; >> + >> + simple-audio-card,format = "i2s"; >> + simple-audio-card,bitclock-master = <&link0_codec>; >> + simple-audio-card,frame-master = <&link0_codec>; >> + >> + simple-audio-card,cpu { >> + sound-dai = <&i2s0 0>; >> + system-clock-frequency = <19200000>; >> + }; >> + >> + link0_codec: simple-audio-card,codec { >> + sound-dai = <&max98090>; >> + clocks = <&i2s0 CLK_I2S_CDCLK>; >> + }; >> + }; >> +}; >> + >> +&hsi2c_5 { >> + max98090: max98090@10 { >> + compatible = "maxim,max98090"; >> + reg = <0x10>; >> + interrupt-parent = <&gpx3>; >> + interrupts = <2 0>; >> + clocks = <&i2s0 CLK_I2S_CDCLK>; >> + clock-names = "mclk"; >> + #sound-dai-cells = <0>; >> + }; > > Shouldn't this node also include the status = "okay" ? Let me answer to this in next comment. > >> +}; >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> index dd8bc86d9de4..52c34d8e791f 100644 >> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> @@ -46,70 +46,6 @@ >> reset-gpios = <&gpd1 0 1>; >> }; >> >> - pwmleds { >> - compatible = "pwm-leds"; >> - >> - greenled { >> - label = "green:mmc0"; >> - pwms = <&pwm 1 2000000 0>; >> - pwm-names = "pwm1"; >> - /* >> - * Green LED is much brighter than the others >> - * so limit its max brightness >> - */ >> - max_brightness = <127>; >> - linux,default-trigger = "mmc0"; >> - }; >> - >> - blueled { >> - label = "blue:heartbeat"; >> - pwms = <&pwm 2 2000000 0>; >> - pwm-names = "pwm2"; >> - max_brightness = <255>; >> - linux,default-trigger = "heartbeat"; >> - }; >> - }; >> - >> - gpioleds { >> - compatible = "gpio-leds"; >> - redled { >> - label = "red:microSD"; >> - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; >> - default-state = "off"; >> - linux,default-trigger = "mmc1"; >> - }; >> - }; >> - >> - sound: sound { >> - compatible = "simple-audio-card"; >> - >> - simple-audio-card,name = "Odroid-XU3"; >> - simple-audio-card,widgets = >> - "Headphone", "Headphone Jack", >> - "Speakers", "Speakers"; >> - simple-audio-card,routing = >> - "Headphone Jack", "HPL", >> - "Headphone Jack", "HPR", >> - "Headphone Jack", "MICBIAS", >> - "IN1", "Headphone Jack", >> - "Speakers", "SPKL", >> - "Speakers", "SPKR"; >> - >> - simple-audio-card,format = "i2s"; >> - simple-audio-card,bitclock-master = <&link0_codec>; >> - simple-audio-card,frame-master = <&link0_codec>; >> - >> - simple-audio-card,cpu { >> - sound-dai = <&i2s0 0>; >> - system-clock-frequency = <19200000>; >> - }; >> - >> - link0_codec: simple-audio-card,codec { >> - sound-dai = <&max98090>; >> - clocks = <&i2s0 CLK_I2S_CDCLK>; >> - }; >> - }; >> - >> fan0: pwm-fan { >> compatible = "pwm-fan"; >> pwms = <&pwm 0 20972 0>; >> @@ -378,15 +314,6 @@ >> >> &hsi2c_5 { >> status = "okay"; > > since I believe for the Odroid XU4 we would like this to be disabled. > The only I2C device in this I2C bus is the max98090 codec which is > not present in the XU4. hsi2c_5 and i2s_0 are not used by board directly but are connected to external connector: http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825&tab_idx=2 This is the 12pin GPIO/I2C/I2S connector in bottom-right corner of board view. This is why I left this and is2_0 enabled on Odroid XU4 - I assumed someone may connect something to it. However I have doubts if it is usable in such state: without respective addresses and interrupts. In the same time OF_OVERLAY should customize it properly. What do you think? Thanks for review, Best regards, Krzysztof > >> - max98090: max98090@10 { >> - compatible = "maxim,max98090"; >> - reg = <0x10>; >> - interrupt-parent = <&gpx3>; >> - interrupts = <2 0>; >> - clocks = <&i2s0 CLK_I2S_CDCLK>; >> - clock-names = "mclk"; >> - #sound-dai-cells = <0>; >> - }; >> }; >> >> &i2c_2 { >> @@ -464,19 +391,6 @@ >> }; >> }; >> >> -&pwm { >> - /* >> - * PWM 0 -- fan >> - * PWM 1 -- Green LED >> - * PWM 2 -- Blue LED >> - * PWM 3 -- on MIPI connector for backlight >> - */ >> - pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; >> - pinctrl-names = "default"; >> - samsung,pwm-outputs = <0>; >> - status = "okay"; >> -}; >> - >> &tmu_cpu0 { >> vtmu-supply = <&ldo7_reg>; >> status = "okay"; >> @@ -512,9 +426,7 @@ >> dr_mode = "host"; >> }; >> >> -&usbdrd_dwc3_1 { >> - dr_mode = "otg"; >> -}; >> +/* usbdrd_dwc3_1 mode customized in each board */ >> >> &usbdrd3_0 { >> vdd33-supply = <&ldo9_reg>; >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts >> index c06882bbb822..379cd61178ee 100644 >> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts >> @@ -13,8 +13,60 @@ >> >> /dts-v1/; >> #include "exynos5422-odroidxu3-common.dtsi" >> +#include "exynos5422-odroidxu3-audio.dtsi" >> >> / { >> model = "Hardkernel Odroid XU3 Lite"; >> compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; >> + >> + pwmleds { >> + compatible = "pwm-leds"; >> + >> + greenled { >> + label = "green:mmc0"; >> + pwms = <&pwm 1 2000000 0>; >> + pwm-names = "pwm1"; >> + /* >> + * Green LED is much brighter than the others >> + * so limit its max brightness >> + */ >> + max_brightness = <127>; >> + linux,default-trigger = "mmc0"; >> + }; >> + >> + blueled { >> + label = "blue:heartbeat"; >> + pwms = <&pwm 2 2000000 0>; >> + pwm-names = "pwm2"; >> + max_brightness = <255>; >> + linux,default-trigger = "heartbeat"; >> + }; >> + }; >> + >> + gpioleds { >> + compatible = "gpio-leds"; >> + redled { >> + label = "red:microSD"; >> + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; >> + default-state = "off"; >> + linux,default-trigger = "mmc1"; >> + }; >> + }; >> +}; >> + >> +&pwm { >> + /* >> + * PWM 0 -- fan >> + * PWM 1 -- Green LED >> + * PWM 2 -- Blue LED >> + * PWM 3 -- on MIPI connector for backlight >> + */ >> + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; >> + pinctrl-names = "default"; >> + samsung,pwm-outputs = <0>; >> + status = "okay"; >> +}; >> + >> +&usbdrd_dwc3_1 { >> + dr_mode = "otg"; >> }; >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts >> index 78e6a502f320..c7509690131d 100644 >> --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts >> @@ -12,10 +12,45 @@ >> >> /dts-v1/; >> #include "exynos5422-odroidxu3-common.dtsi" >> +#include "exynos5422-odroidxu3-audio.dtsi" >> >> / { >> model = "Hardkernel Odroid XU3"; >> compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; >> + >> + pwmleds { >> + compatible = "pwm-leds"; >> + >> + greenled { >> + label = "green:mmc0"; >> + pwms = <&pwm 1 2000000 0>; >> + pwm-names = "pwm1"; >> + /* >> + * Green LED is much brighter than the others >> + * so limit its max brightness >> + */ >> + max_brightness = <127>; >> + linux,default-trigger = "mmc0"; >> + }; >> + >> + blueled { >> + label = "blue:heartbeat"; >> + pwms = <&pwm 2 2000000 0>; >> + pwm-names = "pwm2"; >> + max_brightness = <255>; >> + linux,default-trigger = "heartbeat"; >> + }; >> + }; >> + >> + gpioleds { >> + compatible = "gpio-leds"; >> + redled { >> + label = "red:microSD"; >> + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; >> + default-state = "off"; >> + linux,default-trigger = "mmc1"; >> + }; >> + }; >> }; >> >> &i2c_0 { >> @@ -49,3 +84,20 @@ >> shunt-resistor = <10000>; >> }; >> }; >> + >> +&pwm { >> + /* >> + * PWM 0 -- fan >> + * PWM 1 -- Green LED >> + * PWM 2 -- Blue LED >> + * PWM 3 -- on MIPI connector for backlight >> + */ >> + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; >> + pinctrl-names = "default"; >> + samsung,pwm-outputs = <0>; >> + status = "okay"; >> +}; >> + >> +&usbdrd_dwc3_1 { >> + dr_mode = "otg"; >> +}; >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts >> new file mode 100644 >> index 000000000000..087c485b6084 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts >> @@ -0,0 +1,48 @@ >> +/* >> + * Hardkernel Odroid XU4 board device tree source >> + * >> + * Copyright (c) 2015 Krzysztof Kozlowski >> + * Copyright (c) 2014 Collabora Ltd. >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +/dts-v1/; >> +#include "exynos5422-odroidxu3-common.dtsi" >> + >> +/ { >> + model = "Hardkernel Odroid XU4"; >> + compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \ >> + "samsung,exynos5"; >> + >> + pwmleds { >> + compatible = "pwm-leds"; >> + >> + blueled { >> + label = "blue:heartbeat"; >> + pwms = <&pwm 2 2000000 0>; >> + pwm-names = "pwm2"; >> + max_brightness = <255>; >> + linux,default-trigger = "heartbeat"; >> + }; >> + }; >> +}; >> + >> +&pwm { >> + /* >> + * PWM 0 -- fan >> + * PWM 2 -- Blue LED >> + */ >> + pinctrl-0 = <&pwm0_out &pwm2_out>; >> + pinctrl-names = "default"; >> + samsung,pwm-outputs = <0>; >> + status = "okay"; >> +}; >> + >> +&usbdrd_dwc3_1 { >> + dr_mode = "host"; >> +}; >> > > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > > Best regards, > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Krzysztof, On 09/01/2015 02:00 PM, Krzysztof Kozlowski wrote: > W dniu 01.09.2015 o 17:48, Javier Martinez Canillas pisze: [snip] >>> >>> &hsi2c_5 { >>> status = "okay"; >> >> since I believe for the Odroid XU4 we would like this to be disabled. >> The only I2C device in this I2C bus is the max98090 codec which is >> not present in the XU4. > > hsi2c_5 and i2s_0 are not used by board directly but are connected to > external connector: > http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825&tab_idx=2 > > This is the 12pin GPIO/I2C/I2S connector in bottom-right corner of board > view. > Thanks for the info, I missed that. > This is why I left this and is2_0 enabled on Odroid XU4 - I assumed > someone may connect something to it. However I have doubts if it is Yes, now it makes sense. > usable in such state: without respective addresses and interrupts. In > the same time OF_OVERLAY should customize it properly. > > What do you think? > As you said, these are not usable in the current form since if someone wants to use it, has to add a dev node for the I2C device, possibly a clock-frequency to change the default operating frequency, etc. So has to either create a new DTS based on exynos5422-odroidxu4.dts or as you said use OF overlays. IMHO these should be left disabled and be enabled by users when adding the needed stuff. > Thanks for review, > Best regards, > Krzysztof > Best regards,
W dniu 01.09.2015 o 21:18, Javier Martinez Canillas pisze: > Hello Krzysztof, > > On 09/01/2015 02:00 PM, Krzysztof Kozlowski wrote: >> W dniu 01.09.2015 o 17:48, Javier Martinez Canillas pisze: > > [snip] > >>>> >>>> &hsi2c_5 { >>>> status = "okay"; >>> >>> since I believe for the Odroid XU4 we would like this to be disabled. >>> The only I2C device in this I2C bus is the max98090 codec which is >>> not present in the XU4. >> >> hsi2c_5 and i2s_0 are not used by board directly but are connected to >> external connector: >> http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825&tab_idx=2 >> >> This is the 12pin GPIO/I2C/I2S connector in bottom-right corner of board >> view. >> > > Thanks for the info, I missed that. > >> This is why I left this and is2_0 enabled on Odroid XU4 - I assumed >> someone may connect something to it. However I have doubts if it is > > Yes, now it makes sense. > >> usable in such state: without respective addresses and interrupts. In >> the same time OF_OVERLAY should customize it properly. >> >> What do you think? >> > > As you said, these are not usable in the current form since if someone > wants to use it, has to add a dev node for the I2C device, possibly a > clock-frequency to change the default operating frequency, etc. > > So has to either create a new DTS based on exynos5422-odroidxu4.dts or > as you said use OF overlays. IMHO these should be left disabled and be > enabled by users when adding the needed stuff. Okay. I'll update the patch by moving entire hsi2c_5 node to audio DTSI (including "okay") and i2s0 thus disabling them on XU4. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..3d27fe34647f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-smdk5420.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ + exynos5422-odroidxu4.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi new file mode 100644 index 000000000000..eee16a820484 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -0,0 +1,56 @@ +/* + * Hardkernel Odroid XU3 Audio Codec device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "Odroid-XU3"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + system-clock-frequency = <19200000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&max98090>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + }; + }; +}; + +&hsi2c_5 { + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index dd8bc86d9de4..52c34d8e791f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -46,70 +46,6 @@ reset-gpios = <&gpd1 0 1>; }; - pwmleds { - compatible = "pwm-leds"; - - greenled { - label = "green:mmc0"; - pwms = <&pwm 1 2000000 0>; - pwm-names = "pwm1"; - /* - * Green LED is much brighter than the others - * so limit its max brightness - */ - max_brightness = <127>; - linux,default-trigger = "mmc0"; - }; - - blueled { - label = "blue:heartbeat"; - pwms = <&pwm 2 2000000 0>; - pwm-names = "pwm2"; - max_brightness = <255>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpioleds { - compatible = "gpio-leds"; - redled { - label = "red:microSD"; - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc1"; - }; - }; - - sound: sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "Odroid-XU3"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Speakers", "Speakers"; - simple-audio-card,routing = - "Headphone Jack", "HPL", - "Headphone Jack", "HPR", - "Headphone Jack", "MICBIAS", - "IN1", "Headphone Jack", - "Speakers", "SPKL", - "Speakers", "SPKR"; - - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&link0_codec>; - simple-audio-card,frame-master = <&link0_codec>; - - simple-audio-card,cpu { - sound-dai = <&i2s0 0>; - system-clock-frequency = <19200000>; - }; - - link0_codec: simple-audio-card,codec { - sound-dai = <&max98090>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - }; - }; - fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 20972 0>; @@ -378,15 +314,6 @@ &hsi2c_5 { status = "okay"; - max98090: max98090@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - }; }; &i2c_2 { @@ -464,19 +391,6 @@ }; }; -&pwm { - /* - * PWM 0 -- fan - * PWM 1 -- Green LED - * PWM 2 -- Blue LED - * PWM 3 -- on MIPI connector for backlight - */ - pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; - pinctrl-names = "default"; - samsung,pwm-outputs = <0>; - status = "okay"; -}; - &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; status = "okay"; @@ -512,9 +426,7 @@ dr_mode = "host"; }; -&usbdrd_dwc3_1 { - dr_mode = "otg"; -}; +/* usbdrd_dwc3_1 mode customized in each board */ &usbdrd3_0 { vdd33-supply = <&ldo9_reg>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index c06882bbb822..379cd61178ee 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -13,8 +13,60 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" +#include "exynos5422-odroidxu3-audio.dtsi" / { model = "Hardkernel Odroid XU3 Lite"; compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 78e6a502f320..c7509690131d 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -12,10 +12,45 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" +#include "exynos5422-odroidxu3-audio.dtsi" / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; }; &i2c_0 { @@ -49,3 +84,20 @@ shunt-resistor = <10000>; }; }; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts new file mode 100644 index 000000000000..087c485b6084 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -0,0 +1,48 @@ +/* + * Hardkernel Odroid XU4 board device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5422-odroidxu3-common.dtsi" + +/ { + model = "Hardkernel Odroid XU4"; + compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \ + "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 2 -- Blue LED + */ + pinctrl-0 = <&pwm0_out &pwm2_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +};
Add Hardkernel Odroid XU4 board Device Tree sources. The board differs from Odroid XU3 and XU3-Lite by: 1. No green and red leds (except standard red power led). 2. No audio codec. 3. Two USB3 ports in host mode (no micro USB3 connector for OTG). 4. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). 5. Additional connector with IO ports (I2S_0, I2C_5). 6. No DisplayPort. 7. No TI INA231 power measurement sensors. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 56 ++++++++++++++ arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 90 +--------------------- arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 52 +++++++++++++ arch/arm/boot/dts/exynos5422-odroidxu3.dts | 52 +++++++++++++ arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 ++++++++++++ 6 files changed, 210 insertions(+), 89 deletions(-) create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts