diff mbox

[v1,1/2] clk: samsung: exynos5250: Add DISP1 clocks

Message ID 1444819457-27519-2-git-send-email-tomeu.vizoso@collabora.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Tomeu Vizoso Oct. 14, 2015, 10:44 a.m. UTC 
When the DISP1 power domain is powered off, there's two clocks that need
to be temporarily reparented to OSC, and back to their original parents
when the domain is powered on again.

We expose these two clocks in the DT bindings so that the DT node of the
power domain can reference them.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
---

 drivers/clk/samsung/clk-exynos5250.c   | 16 +++++++++++++++-
 include/dt-bindings/clock/exynos5250.h |  4 +++-
 2 files changed, 18 insertions(+), 2 deletions(-)

Comments

Stephen Boyd Oct. 14, 2015, 6:32 p.m. UTC | #1 
On 10/14, Tomeu Vizoso wrote:
> When the DISP1 power domain is powered off, there's two clocks that need
> to be temporarily reparented to OSC, and back to their original parents
> when the domain is powered on again.
> 
> We expose these two clocks in the DT bindings so that the DT node of the
> power domain can reference them.
> 
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
> ---

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Krzysztof Kozlowski Oct. 15, 2015, 1:37 a.m. UTC | #2 
On 14.10.2015 19:44, Tomeu Vizoso wrote:
> When the DISP1 power domain is powered off, there's two clocks that need
> to be temporarily reparented to OSC, and back to their original parents
> when the domain is powered on again.
> 
> We expose these two clocks in the DT bindings so that the DT node of the
> power domain can reference them.
> 
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
> ---
> 
>  drivers/clk/samsung/clk-exynos5250.c   | 16 +++++++++++++++-
>  include/dt-bindings/clock/exynos5250.h |  4 +++-
>  2 files changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
> index 55b83c7ef878..918e40fa6aa1 100644
> --- a/drivers/clk/samsung/clk-exynos5250.c
> +++ b/drivers/clk/samsung/clk-exynos5250.c
> @@ -222,9 +222,14 @@ PNAME(mout_mpll_user_p)	= { "fin_pll", "mout_mpll" };
>  PNAME(mout_bpll_user_p)	= { "fin_pll", "mout_bpll" };
>  PNAME(mout_aclk166_p)	= { "mout_cpll", "mout_mpll_user" };
>  PNAME(mout_aclk200_p)	= { "mout_mpll_user", "mout_bpll_user" };
> +PNAME(mout_aclk300_p)	= { "mout_aclk300_disp1_mid",
> +			    "mout_aclk300_disp1_mid1" };
>  PNAME(mout_aclk400_p)	= { "mout_aclk400_g3d_mid", "mout_gpll" };
>  PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" };
>  PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" };
> +PNAME(mout_aclk300_sub_p) = { "fin_pll", "div_aclk300" };
> +PNAME(mout_aclk300_disp1_mid_p) = { "mout_mpll_user", "mout_bpll_user" };

There is no need for that, just use existing mout_aclk200_p.

> +PNAME(mout_aclk300_disp1_mid1_p) = { "mout_vpll", "mout_cpll" };
>  PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" };
>  PNAME(mout_aclk400_isp_sub_p) = { "fin_pll", "div_aclk400_isp" };
>  PNAME(mout_hdmi_p)	= { "div_hdmi_pixel", "sclk_hdmiphy" };
> @@ -303,9 +308,14 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
>  	 */
>  	MUX(0, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1),
>  	MUX(0, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1),
> +	MUX(0, "mout_aclk300_disp1_mid", mout_aclk300_disp1_mid_p, SRC_TOP0,
> +		14, 1),
> +	MUX(0, "mout_aclk300", mout_aclk300_p, SRC_TOP0, 15, 1),
>  	MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
>  	MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1),
>  
> +	MUX(0, "mout_aclk300_disp1_mid1", mout_aclk300_disp1_mid1_p, SRC_TOP1,
> +		8, 1),
>  	MUX(0, "mout_aclk400_isp", mout_aclk200_p, SRC_TOP1, 24, 1),
>  	MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1),
>  
> @@ -316,7 +326,10 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
>  	MUX(0, "mout_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1),
>  	MUX(CLK_MOUT_GPLL, "mout_gpll", mout_gpll_p, SRC_TOP2, 28, 1),
>  
> -	MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1),
> +	MUX(CLK_MOUT_ACLK200_DISP1_SUB, "mout_aclk200_disp1_sub",
> +		mout_aclk200_sub_p, SRC_TOP3, 4, 1),
> +	MUX(CLK_MOUT_ACLK300_DISP1_SUB, "mout_aclk300_disp1_sub",
> +		mout_aclk300_sub_p, SRC_TOP3, 6, 1),
>  	MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1),
>  	MUX(0, "mout_aclk_266_isp_sub", mout_aclk266_sub_p, SRC_TOP3, 16, 1),
>  	MUX(0, "mout_aclk_400_isp_sub", mout_aclk400_isp_sub_p,
> @@ -392,6 +405,7 @@ static struct samsung_div_clock exynos5250_div_clks[] __initdata = {
>  	DIV(0, "div_aclk333", "mout_aclk333", DIV_TOP0, 20, 3),
>  	DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0,
>  							24, 3),
> +	DIV(0, "div_aclk300", "mout_aclk300", DIV_TOP0, 28, 3),

Maybe use name "div_aclk300_disp"? There is similar clock for GSCALER,
so the div_aclk300 would be too generic.

Best regards,
Krzysztof

>  
>  	DIV(0, "div_aclk400_isp", "mout_aclk400_isp", DIV_TOP1, 20, 3),
>  	DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3),
> diff --git a/include/dt-bindings/clock/exynos5250.h b/include/dt-bindings/clock/exynos5250.h
> index 8183d1c237d9..15508adcdfde 100644
> --- a/include/dt-bindings/clock/exynos5250.h
> +++ b/include/dt-bindings/clock/exynos5250.h
> @@ -173,8 +173,10 @@
>  /* mux clocks */
>  #define CLK_MOUT_HDMI		1024
>  #define CLK_MOUT_GPLL		1025
> +#define CLK_MOUT_ACLK200_DISP1_SUB	1026
> +#define CLK_MOUT_ACLK300_DISP1_SUB	1027
>  
>  /* must be greater than maximal clock id */
> -#define CLK_NR_CLKS		1026
> +#define CLK_NR_CLKS		1028
>  
>  #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5250_H */
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 55b83c7ef878..918e40fa6aa1 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -222,9 +222,14 @@  PNAME(mout_mpll_user_p)	= { "fin_pll", "mout_mpll" };
 PNAME(mout_bpll_user_p)	= { "fin_pll", "mout_bpll" };
 PNAME(mout_aclk166_p)	= { "mout_cpll", "mout_mpll_user" };
 PNAME(mout_aclk200_p)	= { "mout_mpll_user", "mout_bpll_user" };
+PNAME(mout_aclk300_p)	= { "mout_aclk300_disp1_mid",
+			    "mout_aclk300_disp1_mid1" };
 PNAME(mout_aclk400_p)	= { "mout_aclk400_g3d_mid", "mout_gpll" };
 PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" };
 PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" };
+PNAME(mout_aclk300_sub_p) = { "fin_pll", "div_aclk300" };
+PNAME(mout_aclk300_disp1_mid_p) = { "mout_mpll_user", "mout_bpll_user" };
+PNAME(mout_aclk300_disp1_mid1_p) = { "mout_vpll", "mout_cpll" };
 PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" };
 PNAME(mout_aclk400_isp_sub_p) = { "fin_pll", "div_aclk400_isp" };
 PNAME(mout_hdmi_p)	= { "div_hdmi_pixel", "sclk_hdmiphy" };
@@ -303,9 +308,14 @@  static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
 	 */
 	MUX(0, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1),
 	MUX(0, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1),
+	MUX(0, "mout_aclk300_disp1_mid", mout_aclk300_disp1_mid_p, SRC_TOP0,
+		14, 1),
+	MUX(0, "mout_aclk300", mout_aclk300_p, SRC_TOP0, 15, 1),
 	MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
 	MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1),
 
+	MUX(0, "mout_aclk300_disp1_mid1", mout_aclk300_disp1_mid1_p, SRC_TOP1,
+		8, 1),
 	MUX(0, "mout_aclk400_isp", mout_aclk200_p, SRC_TOP1, 24, 1),
 	MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1),
 
@@ -316,7 +326,10 @@  static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
 	MUX(0, "mout_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1),
 	MUX(CLK_MOUT_GPLL, "mout_gpll", mout_gpll_p, SRC_TOP2, 28, 1),
 
-	MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1),
+	MUX(CLK_MOUT_ACLK200_DISP1_SUB, "mout_aclk200_disp1_sub",
+		mout_aclk200_sub_p, SRC_TOP3, 4, 1),
+	MUX(CLK_MOUT_ACLK300_DISP1_SUB, "mout_aclk300_disp1_sub",
+		mout_aclk300_sub_p, SRC_TOP3, 6, 1),
 	MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1),
 	MUX(0, "mout_aclk_266_isp_sub", mout_aclk266_sub_p, SRC_TOP3, 16, 1),
 	MUX(0, "mout_aclk_400_isp_sub", mout_aclk400_isp_sub_p,
@@ -392,6 +405,7 @@  static struct samsung_div_clock exynos5250_div_clks[] __initdata = {
 	DIV(0, "div_aclk333", "mout_aclk333", DIV_TOP0, 20, 3),
 	DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0,
 							24, 3),
+	DIV(0, "div_aclk300", "mout_aclk300", DIV_TOP0, 28, 3),
 
 	DIV(0, "div_aclk400_isp", "mout_aclk400_isp", DIV_TOP1, 20, 3),
 	DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3),
diff --git a/include/dt-bindings/clock/exynos5250.h b/include/dt-bindings/clock/exynos5250.h
index 8183d1c237d9..15508adcdfde 100644
--- a/include/dt-bindings/clock/exynos5250.h
+++ b/include/dt-bindings/clock/exynos5250.h
@@ -173,8 +173,10 @@ 
 /* mux clocks */
 #define CLK_MOUT_HDMI		1024
 #define CLK_MOUT_GPLL		1025
+#define CLK_MOUT_ACLK200_DISP1_SUB	1026
+#define CLK_MOUT_ACLK300_DISP1_SUB	1027
 
 /* must be greater than maximal clock id */
-#define CLK_NR_CLKS		1026
+#define CLK_NR_CLKS		1028
 
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5250_H */