| Message ID | 1447996629-18232-6-git-send-email-alim.akhtar@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 20.11.2015 14:17, Alim Akhtar wrote: > Since we switch to use generic syscon regmap based reset/poweroff > driver for exynos SoC, lets select it from ARCH_EXYNOS instead of > enabling it from various defconfigs. This also select POWER_RESET > as SYSCON-{reset, poweroff} drivers depends on it. > > Also because of the above changes we don't need special handling > for reboot/poweroff in exynos pmu driver. This patch also removes > the same from exynos pmu driver to keep git bisect working. > > Note: This will break reboot/poweroff on boards with older dtbs > with a newer kernel. > > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > Acked-by: Moritz Fischer <moritz.fischer@ettus.com> > --- > arch/arm/mach-exynos/Kconfig | 3 +++ > arch/arm/mach-exynos/pmu.c | 43 ------------------------------------------ > 2 files changed, 3 insertions(+), 43 deletions(-) > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Thanks, applied with different title: "ARM: EXYNOS: Switch to syscon reboot and poweroff" https://git.kernel.org/cgit/linux/kernel/git/krzk/linux.git/log/?h=next/soc I'll be pushing this to Kukjin for v4.5 (unless he picks it by himself). Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello! Tested it on top of 4.4-rc3. > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 3a10f1a8317a..d279edf9b10d 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -27,6 +27,9 @@ menuconfig ARCH_EXYNOS > select SRAM > select THERMAL > select MFD_SYSCON > + select POWER_RESET > + select POWER_RESET_SYSCON > + select POWER_RESET_SYSCON_POWEROFF "select POWER_SUPPLY" is missing here. Without is we get: --- cut --- warning: (ARCH_HISI && ARCH_INTEGRATOR && ARCH_EXYNOS && ARCH_VEXPRESS && REALVIEW_DT) selects POWER_RESET which has unmet direct dependencies (POWER_SUPPLY) warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON_POWEROFF which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) --- cut --- > help > Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) Otherwise works fine. Tested-by: Pavel Fedin <p.fedin@samsung.com> Kind regards, Pavel Fedin Expert Engineer Samsung Electronics Research center Russia -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 01.12.2015 18:03, Pavel Fedin wrote: > Hello! > > Tested it on top of 4.4-rc3. > >> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig >> index 3a10f1a8317a..d279edf9b10d 100644 >> --- a/arch/arm/mach-exynos/Kconfig >> +++ b/arch/arm/mach-exynos/Kconfig >> @@ -27,6 +27,9 @@ menuconfig ARCH_EXYNOS >> select SRAM >> select THERMAL >> select MFD_SYSCON >> + select POWER_RESET >> + select POWER_RESET_SYSCON >> + select POWER_RESET_SYSCON_POWEROFF > > "select POWER_SUPPLY" is missing here. Without is we get: > --- cut --- > warning: (ARCH_HISI && ARCH_INTEGRATOR && ARCH_EXYNOS && ARCH_VEXPRESS && REALVIEW_DT) selects POWER_RESET which has unmet direct > dependencies (POWER_SUPPLY) > warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) > warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON_POWEROFF which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) > --- cut --- > >> help >> Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) > > Otherwise works fine. > > Tested-by: Pavel Fedin <p.fedin@samsung.com> Testing was a little bit too late (late not only looking at date of v1 and v2 but even for v3)... I appreciate it but I applied it already and in fact I sent a pull request with it. Actually the proper fix I think is to remove the dependency between POWER_RESET and POWER_SUPPLY. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 3a10f1a8317a..d279edf9b10d 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -27,6 +27,9 @@ menuconfig ARCH_EXYNOS select SRAM select THERMAL select MFD_SYSCON + select POWER_RESET + select POWER_RESET_SYSCON + select POWER_RESET_SYSCON_POWEROFF help Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index de68938ee6aa..393c04aa727e 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -14,9 +14,6 @@ #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/notifier.h> -#include <linux/reboot.h> - #include "exynos-pmu.h" #include "regs-pmu.h" @@ -681,23 +678,6 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = { EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, }; -static void exynos_power_off(void) -{ - unsigned int tmp; - - pr_info("Power down.\n"); - tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL); - tmp ^= (1 << 8); - pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL); - - /* Wait a little so we don't give a false warning below */ - mdelay(100); - - pr_err("Power down failed, please power off system manually.\n"); - while (1) - ; -} - static void exynos5420_powerdown_conf(enum sys_powerdown mode) { u32 this_cluster; @@ -875,14 +855,6 @@ static void exynos5420_pmu_init(void) pr_info("EXYNOS5420 PMU initialized\n"); } -static int pmu_restart_notify(struct notifier_block *this, - unsigned long code, void *unused) -{ - pmu_raw_writel(0x1, EXYNOS_SWRESET); - - return NOTIFY_DONE; -} - static const struct exynos_pmu_data exynos3250_pmu_data = { .pmu_config = exynos3250_pmu_config, .pmu_init = exynos3250_pmu_init, @@ -940,20 +912,11 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = { { /*sentinel*/ }, }; -/* - * Exynos PMU restart notifier, handles restart functionality - */ -static struct notifier_block pmu_restart_handler = { - .notifier_call = pmu_restart_notify, - .priority = 128, -}; - static int exynos_pmu_probe(struct platform_device *pdev) { const struct of_device_id *match; struct device *dev = &pdev->dev; struct resource *res; - int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pmu_base_addr = devm_ioremap_resource(dev, res); @@ -978,12 +941,6 @@ static int exynos_pmu_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pmu_context); - ret = register_restart_handler(&pmu_restart_handler); - if (ret) - dev_warn(dev, "can't register restart handler err=%d\n", ret); - - pm_power_off = exynos_power_off; - dev_dbg(dev, "Exynos PMU Driver probe done\n"); return 0; }
Since we switch to use generic syscon regmap based reset/poweroff driver for exynos SoC, lets select it from ARCH_EXYNOS instead of enabling it from various defconfigs. This also select POWER_RESET as SYSCON-{reset, poweroff} drivers depends on it. Also because of the above changes we don't need special handling for reboot/poweroff in exynos pmu driver. This patch also removes the same from exynos pmu driver to keep git bisect working. Note: This will break reboot/poweroff on boards with older dtbs with a newer kernel. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> --- arch/arm/mach-exynos/Kconfig | 3 +++ arch/arm/mach-exynos/pmu.c | 43 ------------------------------------------ 2 files changed, 3 insertions(+), 43 deletions(-)