@@ -649,6 +649,7 @@ config ARCH_S3C64XX
select SAMSUNG_ATAGS
select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
+ select SPARSE_IRQ
help
Samsung S3C64XX series based systems
@@ -39,6 +39,7 @@
#include <asm/system_misc.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -23,6 +23,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/devs.h>
@@ -156,25 +156,11 @@
#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
+/* Some boards have their own IRQs behind this */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 160
-#elif defined(CONFIG_SMDK6410_WM1190_EV1)
-#define IRQ_BOARD_NR 64
-#elif defined(CONFIG_SMDK6410_WM1192_EV1)
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_BOARD_END + 1)
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS IRQ_BOARD_START
/* Compatibility */
@@ -18,6 +18,7 @@
#include <linux/serial_s3c.h>
#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
static inline void s3c_pm_debug_init_uart(void)
{
@@ -47,6 +47,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <plat/samsung-time.h>
@@ -229,7 +230,7 @@ static void __init anw6410_machine_init(void)
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
@@ -30,6 +30,8 @@
#include <linux/platform_data/spi-s3c64xx.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
+
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
@@ -52,6 +52,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
@@ -860,6 +861,7 @@ static void __init crag6410_machine_init(void)
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
@@ -31,6 +31,7 @@
#include <video/samsung_fimd.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -279,6 +280,7 @@ static void __init hmt_machine_init(void)
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
@@ -41,6 +41,7 @@
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <mach/irqs.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
@@ -363,6 +364,7 @@ static void __init mini6410_machine_init(void)
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
@@ -31,6 +31,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -100,6 +101,7 @@ static void __init ncp_machine_init(void)
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
@@ -33,6 +33,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/adc.h>
#include <plat/cpu.h>
@@ -331,7 +332,7 @@ static void __init real6410_machine_init(void)
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -153,6 +154,7 @@ static void __init smartq5_machine_init(void)
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -169,6 +170,7 @@ static void __init smartq7_machine_init(void)
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
@@ -27,6 +27,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -88,7 +89,7 @@ static void __init smdk6400_machine_init(void)
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
@@ -52,6 +52,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <asm/irq.h>
@@ -707,7 +708,7 @@ static void __init smdk6410_machine_init(void)
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
@@ -30,6 +30,7 @@
#include <asm/irq.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
This is another prerequisite for enabling multiplatform support, and it is the part I am least certain about. I assume it will cause the extra boot message "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated" to be printed, but otherwise work ok. This definitely needs to be tested on real hardware to see if it works. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/Kconfig | 1 + arch/arm/mach-s3c64xx/common.c | 1 + arch/arm/mach-s3c64xx/dev-uart.c | 1 + arch/arm/mach-s3c64xx/include/mach/irqs.h | 20 +++----------------- arch/arm/mach-s3c64xx/include/mach/pm-core.h | 1 + arch/arm/mach-s3c64xx/mach-anw6410.c | 3 ++- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 2 ++ arch/arm/mach-s3c64xx/mach-crag6410.c | 2 ++ arch/arm/mach-s3c64xx/mach-hmt.c | 2 ++ arch/arm/mach-s3c64xx/mach-mini6410.c | 2 ++ arch/arm/mach-s3c64xx/mach-ncp.c | 2 ++ arch/arm/mach-s3c64xx/mach-real6410.c | 3 ++- arch/arm/mach-s3c64xx/mach-smartq5.c | 2 ++ arch/arm/mach-s3c64xx/mach-smartq7.c | 2 ++ arch/arm/mach-s3c64xx/mach-smdk6400.c | 3 ++- arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 ++- arch/arm/plat-samsung/gpio-samsung.c | 1 + 17 files changed, 30 insertions(+), 21 deletions(-)