| Message ID | 1450236502-1713-1-git-send-email-ykk@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wednesday, December 16, 2015 12:28 PM, Yakir Yang wrote: > > link_rate and lane_count already configured in analogix_dp_set_link_train(), > so we don't need to config those repeatly after training finished, just > remove them out. > > Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets > would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}. > > Signed-off-by: Yakir Yang <ykk@rock-chips.com> > Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > Changes in v11: None > Changes in v10: None > Changes in v9: None > Changes in v8: None > Changes in v7: None > Changes in v6: None > Changes in v5: None > Changes in v4: > - Update commit message more readable. (Jingoo) > - Adjust the order from 05 to 04 > > Changes in v3: > - The link_rate and lane_count shouldn't config to the DT property value > directly, but we can take those as hardware limite. For example, RK3288 > only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would > like "link-rate = 0x0a" "lane-count = 4". (Thierry) > > Changes in v2: None > > drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 8 ++++---- > drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 5 +++-- > 2 files changed, 7 insertions(+), 6 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > index 4a05c2b..6f899cd 100644 > --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > @@ -624,6 +624,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp, > /* > * For DP rev.1.1, Maximum link rate of Main Link lanes > * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps > + * For DP rev.1.2, Maximum link rate of Main Link lanes > + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps > */ > analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data); > *bandwidth = data; > @@ -657,7 +659,8 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp, > analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count); > > if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) && > - (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) { > + (dp->link_train.link_rate != LINK_RATE_2_70GBPS) && > + (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) { > dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n", > dp->link_train.link_rate); > dp->link_train.link_rate = LINK_RATE_1_62GBPS; > @@ -898,9 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) > analogix_dp_enable_rx_to_enhanced_mode(dp, 1); > analogix_dp_enable_enhanced_mode(dp, 1); > > - analogix_dp_set_lane_count(dp, dp->video_info->lane_count); > - analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate); > - > analogix_dp_init_video(dp); > ret = analogix_dp_config_video(dp); > if (ret) > diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > index 8e84208..57aa4b0d 100644 > --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > @@ -21,8 +21,9 @@ > #define MAX_EQ_LOOP 5 > > enum link_rate_type { > - LINK_RATE_1_62GBPS = 0x06, > - LINK_RATE_2_70GBPS = 0x0a > + LINK_RATE_1_62GBPS = DP_LINK_BW_1_62, > + LINK_RATE_2_70GBPS = DP_LINK_BW_2_7, > + LINK_RATE_5_40GBPS = DP_LINK_BW_5_4, Then, how about removing 'enum link_rate_type'? If DP_LINK_BW_* are used, LINK_RATE_* are not necessary. Best regards, Jingoo Han > }; > > enum link_lane_count_type { > -- > 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jingoo, Thanks for your respond. On 12/22/2015 08:09 PM, Jingoo Han wrote: > On Wednesday, December 16, 2015 12:28 PM, Yakir Yang wrote: >> link_rate and lane_count already configured in analogix_dp_set_link_train(), >> so we don't need to config those repeatly after training finished, just >> remove them out. >> >> Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets >> would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}. >> >> Signed-off-by: Yakir Yang <ykk@rock-chips.com> >> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> >> --- >> Changes in v11: None >> Changes in v10: None >> Changes in v9: None >> Changes in v8: None >> Changes in v7: None >> Changes in v6: None >> Changes in v5: None >> Changes in v4: >> - Update commit message more readable. (Jingoo) >> - Adjust the order from 05 to 04 >> >> Changes in v3: >> - The link_rate and lane_count shouldn't config to the DT property value >> directly, but we can take those as hardware limite. For example, RK3288 >> only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would >> like "link-rate = 0x0a" "lane-count = 4". (Thierry) >> >> Changes in v2: None >> >> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 8 ++++---- >> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 5 +++-- >> 2 files changed, 7 insertions(+), 6 deletions(-) >> >> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c >> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c >> index 4a05c2b..6f899cd 100644 >> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c >> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c >> @@ -624,6 +624,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp, >> /* >> * For DP rev.1.1, Maximum link rate of Main Link lanes >> * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps >> + * For DP rev.1.2, Maximum link rate of Main Link lanes >> + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps >> */ >> analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data); >> *bandwidth = data; >> @@ -657,7 +659,8 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp, >> analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count); >> >> if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) && >> - (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) { >> + (dp->link_train.link_rate != LINK_RATE_2_70GBPS) && >> + (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) { >> dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n", >> dp->link_train.link_rate); >> dp->link_train.link_rate = LINK_RATE_1_62GBPS; >> @@ -898,9 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) >> analogix_dp_enable_rx_to_enhanced_mode(dp, 1); >> analogix_dp_enable_enhanced_mode(dp, 1); >> >> - analogix_dp_set_lane_count(dp, dp->video_info->lane_count); >> - analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate); >> - >> analogix_dp_init_video(dp); >> ret = analogix_dp_config_video(dp); >> if (ret) >> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h >> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h >> index 8e84208..57aa4b0d 100644 >> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h >> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h >> @@ -21,8 +21,9 @@ >> #define MAX_EQ_LOOP 5 >> >> enum link_rate_type { >> - LINK_RATE_1_62GBPS = 0x06, >> - LINK_RATE_2_70GBPS = 0x0a >> + LINK_RATE_1_62GBPS = DP_LINK_BW_1_62, >> + LINK_RATE_2_70GBPS = DP_LINK_BW_2_7, >> + LINK_RATE_5_40GBPS = DP_LINK_BW_5_4, > Then, how about removing 'enum link_rate_type'? > If DP_LINK_BW_* are used, LINK_RATE_* are not necessary. Sure, good catch. Thanks, - Yakir > Best regards, > Jingoo Han > > >> }; >> >> enum link_lane_count_type { >> -- >> 1.9.1 > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index 4a05c2b..6f899cd 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -624,6 +624,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp, /* * For DP rev.1.1, Maximum link rate of Main Link lanes * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps + * For DP rev.1.2, Maximum link rate of Main Link lanes + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps */ analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data); *bandwidth = data; @@ -657,7 +659,8 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp, analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count); if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) && - (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) { + (dp->link_train.link_rate != LINK_RATE_2_70GBPS) && + (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) { dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n", dp->link_train.link_rate); dp->link_train.link_rate = LINK_RATE_1_62GBPS; @@ -898,9 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) analogix_dp_enable_rx_to_enhanced_mode(dp, 1); analogix_dp_enable_enhanced_mode(dp, 1); - analogix_dp_set_lane_count(dp, dp->video_info->lane_count); - analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate); - analogix_dp_init_video(dp); ret = analogix_dp_config_video(dp); if (ret) diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h index 8e84208..57aa4b0d 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h @@ -21,8 +21,9 @@ #define MAX_EQ_LOOP 5 enum link_rate_type { - LINK_RATE_1_62GBPS = 0x06, - LINK_RATE_2_70GBPS = 0x0a + LINK_RATE_1_62GBPS = DP_LINK_BW_1_62, + LINK_RATE_2_70GBPS = DP_LINK_BW_2_7, + LINK_RATE_5_40GBPS = DP_LINK_BW_5_4, }; enum link_lane_count_type {
link_rate and lane_count already configured in analogix_dp_set_link_train(), so we don't need to config those repeatly after training finished, just remove them out. Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> --- Changes in v11: None Changes in v10: None Changes in v9: None Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: - Update commit message more readable. (Jingoo) - Adjust the order from 05 to 04 Changes in v3: - The link_rate and lane_count shouldn't config to the DT property value directly, but we can take those as hardware limite. For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would like "link-rate = 0x0a" "lane-count = 4". (Thierry) Changes in v2: None drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 8 ++++---- drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 5 +++-- 2 files changed, 7 insertions(+), 6 deletions(-)