@@ -627,6 +627,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
/*
* For DP rev.1.1, Maximum link rate of Main Link lanes
* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+ * For DP rev.1.2, Maximum link rate of Main Link lanes
+ * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
*/
analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data);
*bandwidth = data;
@@ -647,7 +649,7 @@ static void analogix_dp_get_max_rx_lane_count(struct analogix_dp_device *dp,
static void analogix_dp_init_training(struct analogix_dp_device *dp,
enum link_lane_count_type max_lane,
- enum link_rate_type max_rate)
+ int max_rate)
{
/*
* MACRO_RST must be applied after the PLL_LOCK to avoid
@@ -659,11 +661,12 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp,
analogix_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
- if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
- (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ if ((dp->link_train.link_rate != DP_LINK_BW_1_62) &&
+ (dp->link_train.link_rate != DP_LINK_BW_2_7) &&
+ (dp->link_train.link_rate != DP_LINK_BW_5_4)) {
dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
dp->link_train.link_rate);
- dp->link_train.link_rate = LINK_RATE_1_62GBPS;
+ dp->link_train.link_rate = DP_LINK_BW_1_62;
}
if (dp->link_train.lane_count == 0) {
@@ -901,9 +904,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
analogix_dp_enable_enhanced_mode(dp, 1);
- analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
- analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
analogix_dp_init_video(dp);
ret = analogix_dp_config_video(dp);
if (ret)
@@ -20,11 +20,6 @@
#define MAX_CR_LOOP 5
#define MAX_EQ_LOOP 5
-enum link_rate_type {
- LINK_RATE_1_62GBPS = 0x06,
- LINK_RATE_2_70GBPS = 0x0a
-};
-
enum link_lane_count_type {
LANE_COUNT1 = 1,
LANE_COUNT2 = 2,
@@ -128,7 +123,7 @@ struct video_info {
enum color_coefficient ycbcr_coeff;
enum color_depth color_depth;
- enum link_rate_type link_rate;
+ int link_rate;
enum link_lane_count_type lane_count;
};
@@ -855,7 +855,7 @@ void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
u32 reg;
reg = bwtype;
- if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype == LINK_RATE_1_62GBPS))
+ if ((bwtype == DP_LINK_BW_2_7) || (bwtype == DP_LINK_BW_1_62))
writel(reg, dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
}
link_rate and lane_count already configured in analogix_dp_set_link_train(), so we don't need to config those repeatly after training finished, just remove them out. Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> --- Changes in v12: - Remove the enum link_rate_type struct, using the marcos in drm_dp_helper.h (Jingoo) Changes in v11: None Changes in v10: None Changes in v9: None Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: - Update commit message more readable. (Jingoo) - Adjust the order from 05 to 04 Changes in v3: - The link_rate and lane_count shouldn't config to the DT property value directly, but we can take those as hardware limite. For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would like "link-rate = 0x0a" "lane-count = 4". (Thierry) Changes in v2: None drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 14 +++++++------- drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 7 +------ drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 2 +- 3 files changed, 9 insertions(+), 14 deletions(-)