@@ -35,3 +35,12 @@ config ROCKCHIP_DW_MIPI_DSI
for the Synopsys DesignWare HDMI driver. If you want to
enable MIPI DSI on RK3288 based SoC, you should selet this
option.
+
+config ROCKCHIP_ANALOGIX_DP
+ tristate "Rockchip specific extensions for Analogix DP driver"
+ depends on DRM_ROCKCHIP
+ select DRM_ANALOGIX_DP
+ help
+ This selects support for Rockchip SoC specific extensions
+ for the Analogix Core DP driver. If you want to enable DP
+ on RK3288 based SoC, you should selet this option.
@@ -7,6 +7,7 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
+obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o \
rockchip_vop_reg.o
new file mode 100644
@@ -0,0 +1,384 @@
+/*
+ * Rockchip SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ * Yakir Yang <ykk@rock-chips.com>
+ * Jeff Chen <jeff.chen@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/component.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_graph.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#include <drm/bridge/analogix_dp.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
+
+/* dp grf register offset */
+#define GRF_SOC_CON6 0x025c
+#define GRF_EDP_LCD_SEL_MASK BIT(5)
+#define GRF_EDP_SEL_VOP_LIT BIT(5)
+#define GRF_EDP_SEL_VOP_BIG 0
+
+struct rockchip_dp_device {
+ struct drm_device *drm_dev;
+ struct device *dev;
+ struct drm_encoder encoder;
+ struct drm_display_mode mode;
+
+ struct clk *pclk;
+ struct regmap *grf;
+ struct reset_control *rst;
+
+ struct analogix_dp_plat_data plat_data;
+};
+
+static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
+{
+ reset_control_assert(dp->rst);
+ usleep_range(10, 20);
+ reset_control_deassert(dp->rst);
+
+ return 0;
+}
+
+static int rockchip_dp_poweron(struct analogix_dp_plat_data *plat_data)
+{
+ struct rockchip_dp_device *dp = to_dp(plat_data);
+ int ret;
+
+ ret = clk_prepare_enable(dp->pclk);
+ if (ret < 0) {
+ dev_err(dp->dev, "failed to enable pclk %d\n", ret);
+ return ret;
+ }
+
+ ret = rockchip_dp_pre_init(dp);
+ if (ret < 0) {
+ dev_err(dp->dev, "failed to dp pre init %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rockchip_dp_powerdown(struct analogix_dp_plat_data *plat_data)
+{
+ struct rockchip_dp_device *dp = to_dp(plat_data);
+
+ clk_disable_unprepare(dp->pclk);
+
+ return 0;
+}
+
+static bool
+rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ /* do nothing */
+ return true;
+}
+
+static void rockchip_dp_drm_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted)
+{
+ /* do nothing */
+}
+
+static void rockchip_dp_drm_encoder_enable(struct drm_encoder *encoder)
+{
+ struct rockchip_dp_device *dp = to_dp(encoder);
+ int ret;
+ u32 val;
+
+ /*
+ * FIXME(Yakir): driver should configure the CRTC output video
+ * mode with the display information which indicated the monitor
+ * support colorimetry.
+ *
+ * But don't know why the CRTC driver seems could only output the
+ * RGBaaa rightly. For example, if connect the "innolux,n116bge"
+ * eDP screen, EDID would indicated that screen only accepted the
+ * 6bpc mode. But if I configure CRTC to RGB666 output, then eDP
+ * screen would show a blue picture (RGB888 show a green picture).
+ * But if I configure CTRC to RGBaaa, and eDP driver still keep
+ * RGB666 input video mode, then screen would works prefect.
+ */
+ ret = rockchip_drm_crtc_mode_config(encoder->crtc,
+ DRM_MODE_CONNECTOR_eDP,
+ ROCKCHIP_OUT_MODE_AAAA);
+ if (ret < 0) {
+ dev_err(dp->dev, "Could not set crtc mode config (%d)\n", ret);
+ return;
+ }
+
+ ret = rockchip_drm_encoder_get_mux_id(dp->dev->of_node, encoder);
+ if (ret < 0)
+ return;
+
+ if (ret)
+ val = GRF_EDP_SEL_VOP_LIT | (GRF_EDP_LCD_SEL_MASK << 16);
+ else
+ val = GRF_EDP_SEL_VOP_BIG | (GRF_EDP_LCD_SEL_MASK << 16);
+
+ dev_dbg(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
+
+ ret = regmap_write(dp->grf, GRF_SOC_CON6, val);
+ if (ret != 0) {
+ dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
+ return;
+ }
+}
+
+static void rockchip_dp_drm_encoder_nop(struct drm_encoder *encoder)
+{
+ /* do nothing */
+}
+
+static struct drm_encoder_helper_funcs rockchip_dp_encoder_helper_funcs = {
+ .mode_fixup = rockchip_dp_drm_encoder_mode_fixup,
+ .mode_set = rockchip_dp_drm_encoder_mode_set,
+ .enable = rockchip_dp_drm_encoder_enable,
+ .disable = rockchip_dp_drm_encoder_nop,
+};
+
+static void rockchip_dp_drm_encoder_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+static struct drm_encoder_funcs rockchip_dp_encoder_funcs = {
+ .destroy = rockchip_dp_drm_encoder_destroy,
+};
+
+static int rockchip_dp_init(struct rockchip_dp_device *dp)
+{
+ struct device *dev = dp->dev;
+ struct device_node *np = dev->of_node;
+ int ret;
+
+ dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+ if (IS_ERR(dp->grf)) {
+ dev_err(dev, "failed to get rockchip,grf property\n");
+ return PTR_ERR(dp->grf);
+ }
+
+ dp->pclk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(dp->pclk)) {
+ dev_err(dev, "failed to get pclk property\n");
+ return PTR_ERR(dp->pclk);
+ }
+
+ dp->rst = devm_reset_control_get(dev, "dp");
+ if (IS_ERR(dp->rst)) {
+ dev_err(dev, "failed to get dp reset control\n");
+ return PTR_ERR(dp->rst);
+ }
+
+ ret = clk_prepare_enable(dp->pclk);
+ if (ret < 0) {
+ dev_err(dp->dev, "failed to enable pclk %d\n", ret);
+ return ret;
+ }
+
+ ret = rockchip_dp_pre_init(dp);
+ if (ret < 0) {
+ dev_err(dp->dev, "failed to pre init %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rockchip_dp_drm_create_encoder(struct rockchip_dp_device *dp)
+{
+ struct drm_encoder *encoder = &dp->encoder;
+ struct drm_device *drm_dev = dp->drm_dev;
+ struct device *dev = dp->dev;
+ int ret;
+
+ encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
+ dev->of_node);
+ DRM_DEBUG_KMS("possible_crtcs = 0x%x\n", encoder->possible_crtcs);
+
+ ret = drm_encoder_init(drm_dev, encoder, &rockchip_dp_encoder_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ if (ret) {
+ DRM_ERROR("failed to initialize encoder with drm\n");
+ return ret;
+ }
+
+ drm_encoder_helper_add(encoder, &rockchip_dp_encoder_helper_funcs);
+
+ return 0;
+}
+
+static int rockchip_dp_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct rockchip_dp_device *dp = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ int ret;
+
+ /*
+ * Just like the probe function said, we don't need the
+ * device drvrate anymore, we should leave the charge to
+ * analogix dp driver, set the device drvdata to NULL.
+ */
+ dev_set_drvdata(dev, NULL);
+
+ ret = rockchip_dp_init(dp);
+ if (ret < 0)
+ return ret;
+
+ dp->drm_dev = drm_dev;
+
+ ret = rockchip_dp_drm_create_encoder(dp);
+ if (ret) {
+ DRM_ERROR("failed to create drm encoder\n");
+ return ret;
+ }
+
+ dp->plat_data.encoder = &dp->encoder;
+
+ dp->plat_data.dev_type = RK3288_DP;
+ dp->plat_data.power_on = rockchip_dp_poweron;
+ dp->plat_data.power_off = rockchip_dp_powerdown;
+
+ return analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
+}
+
+static void rockchip_dp_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ return analogix_dp_unbind(dev, master, data);
+}
+
+static const struct component_ops rockchip_dp_component_ops = {
+ .bind = rockchip_dp_bind,
+ .unbind = rockchip_dp_unbind,
+};
+
+static int rockchip_dp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *panel_node, *port, *endpoint;
+ struct rockchip_dp_device *dp;
+ struct drm_panel *panel;
+
+ port = of_graph_get_port_by_id(dev->of_node, 1);
+ if (!port) {
+ dev_err(dev, "can't find output port\n");
+ return -EINVAL;
+ }
+
+ endpoint = of_get_child_by_name(port, "endpoint");
+ of_node_put(port);
+ if (!endpoint) {
+ dev_err(dev, "no output endpoint found\n");
+ return -EINVAL;
+ }
+
+ panel_node = of_graph_get_remote_port_parent(endpoint);
+ of_node_put(endpoint);
+ if (!panel_node) {
+ dev_err(dev, "no output node found\n");
+ return -EINVAL;
+ }
+
+ panel = of_drm_find_panel(panel_node);
+ if (!panel) {
+ DRM_ERROR("failed to find panel\n");
+ of_node_put(panel_node);
+ return -EPROBE_DEFER;
+ }
+
+ of_node_put(panel_node);
+
+ dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+ if (!dp)
+ return -ENOMEM;
+
+ dp->dev = dev;
+
+ dp->plat_data.panel = panel;
+
+ /*
+ * We just use the drvdata until driver run into component
+ * add function, and then we would set drvdata to null, so
+ * that analogix dp driver could take charge of the drvdata.
+ */
+ platform_set_drvdata(pdev, dp);
+
+ return component_add(dev, &rockchip_dp_component_ops);
+}
+
+static int rockchip_dp_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &rockchip_dp_component_ops);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rockchip_dp_suspend(struct device *dev)
+{
+ return analogix_dp_suspend(dev);
+}
+
+static int rockchip_dp_resume(struct device *dev)
+{
+ return analogix_dp_resume(dev);
+}
+#endif
+
+static const struct dev_pm_ops rockchip_dp_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(rockchip_dp_suspend, rockchip_dp_resume)
+};
+
+static const struct of_device_id rockchip_dp_dt_ids[] = {
+ {.compatible = "rockchip,rk3288-dp",},
+ {}
+};
+MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
+
+static struct platform_driver rockchip_dp_driver = {
+ .probe = rockchip_dp_probe,
+ .remove = rockchip_dp_remove,
+ .driver = {
+ .name = "rockchip-dp",
+ .owner = THIS_MODULE,
+ .pm = &rockchip_dp_pm_ops,
+ .of_match_table = of_match_ptr(rockchip_dp_dt_ids),
+ },
+};
+
+module_platform_driver(rockchip_dp_driver);
+
+MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
+MODULE_AUTHOR("Jeff chen <jeff.chen@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip Specific Analogix-DP Driver Extension");
+MODULE_LICENSE("GPL v2");
@@ -15,6 +15,7 @@
enum analogix_dp_devtype {
EXYNOS_DP,
+ RK3288_DP,
};
struct analogix_dp_plat_data {