diff mbox

[2/2] i2c: s3c2410: Check clk_prepare_enable() return value

Message ID 1461096641-19788-2-git-send-email-javier@osg.samsung.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Javier Martinez Canillas April 19, 2016, 8:10 p.m. UTC
The clk_prepare_enable() function can fail so check the return
value and propagate the error in case of a failure.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

 drivers/i2c/busses/i2c-s3c2410.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski April 20, 2016, 9:02 a.m. UTC | #1
On 04/19/2016 10:10 PM, Javier Martinez Canillas wrote:
> The clk_prepare_enable() function can fail so check the return
> value and propagate the error in case of a failure.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> 
> ---
> 
>  drivers/i2c/busses/i2c-s3c2410.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
> index 4b873fe9a75b..cb40a3af46e7 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -1196,7 +1196,12 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
>  
>  	/* initialise the i2c controller */
>  
> -	clk_prepare_enable(i2c->clk);
> +	ret = clk_prepare_enable(i2c->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "I2C clock enable failed (%d)\n", ret);

Just: "I2C clock enable failed\n"
The probe error code will be printed anyway.

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 4b873fe9a75b..cb40a3af46e7 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1196,7 +1196,12 @@  static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 	/* initialise the i2c controller */
 
-	clk_prepare_enable(i2c->clk);
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "I2C clock enable failed (%d)\n", ret);
+		return ret;
+	}
+
 	ret = s3c24xx_i2c_init(i2c);
 	clk_disable(i2c->clk);
 	if (ret != 0) {