diff mbox

ASoC: dwc: Drop DMA channel names assignment

Message ID 1470306152-15441-1-git-send-email-s.nawrocki@samsung.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

The dw_configure_dai_by_dt() function and further dev->{play,capture}
_dma_data.dt data structures seem to be used in this driver only in case 
of a system using devicetree, thus chan_name assignments have no effect 
since they will be ignored in dmaengine_pcm_request_chan_of() call and 
will be substituted with values taken form dmaengine_pcm_dma_channel_names[] 
table ("tx", "rx").

Also there is no any "TX", "RX" dma-names entries in arch/arm/boot/dts, 
only lower case "tx", "rx" seem to be used.

Lastly, this driver doesn't set SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME
flag when registering a dmaengine PCM to indicate the chan_name should be
used.

My intention is to eventually remove the struct snd_dmaengine_dai_dma_data
chan_name field as there is also a chan_names[] field in struct
snd_dmaengine_pcm_config which can be used for same purpose.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 sound/soc/dwc/designware_i2s.c | 2 --
 1 file changed, 2 deletions(-)
diff mbox

Patch

diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index dc97f43..2998954 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -577,7 +577,6 @@  static int dw_configure_dai_by_dt(struct dw_i2s_dev *dev,
 		dev->capability |= DWC_I2S_PLAY;
 		dev->play_dma_data.dt.addr = res->start + I2S_TXDMA;
 		dev->play_dma_data.dt.addr_width = bus_widths[idx];
-		dev->play_dma_data.dt.chan_name = "TX";
 		dev->play_dma_data.dt.fifo_size = fifo_depth *
 			(fifo_width[idx2]) >> 8;
 		dev->play_dma_data.dt.maxburst = 16;
@@ -588,7 +587,6 @@  static int dw_configure_dai_by_dt(struct dw_i2s_dev *dev,
 		dev->capability |= DWC_I2S_RECORD;
 		dev->capture_dma_data.dt.addr = res->start + I2S_RXDMA;
 		dev->capture_dma_data.dt.addr_width = bus_widths[idx];
-		dev->capture_dma_data.dt.chan_name = "RX";
 		dev->capture_dma_data.dt.fifo_size = fifo_depth *
 			(fifo_width[idx2] >> 8);
 		dev->capture_dma_data.dt.maxburst = 16;