diff mbox

[v3,1/5] ARM: dts: exynos: Enable HDMI for Arndale Octa board

Message ID 1472044039-16536-2-git-send-email-woogyom.kim@gmail.com (mailing list archive)
State Changes Requested
Headers show

Commit Message

Milo Kim Aug. 24, 2016, 1:07 p.m. UTC
* GPIO for HDMI hot plug detect
  GPX3_7 is used. The HPD awareness is done when the GPIO is active high and
  single ended.

* Enable HDMI block in Exynos5420
  HDMI VDD and PLL consume 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator
  requires 1.8V LDO7 (PVDD_ANAIP_1V8).

* Support HDMI display data channel
  I2C #2 is assigned for the HDMI DDC. It enables the EDID access.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
 arch/arm/boot/dts/exynos5420-arndale-octa.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Krzysztof Kozlowski Aug. 24, 2016, 7:05 p.m. UTC | #1
On Wed, Aug 24, 2016 at 10:07:15PM +0900, Milo Kim wrote:
> * GPIO for HDMI hot plug detect
>   GPX3_7 is used. The HPD awareness is done when the GPIO is active high and
>   single ended.
> 
> * Enable HDMI block in Exynos5420
>   HDMI VDD and PLL consume 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator
>   requires 1.8V LDO7 (PVDD_ANAIP_1V8).
> 
> * Support HDMI display data channel
>   I2C #2 is assigned for the HDMI DDC. It enables the EDID access.
> 
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-samsung-soc@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
> ---
>  arch/arm/boot/dts/exynos5420-arndale-octa.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> index 39a3b81..2fb5708 100644
> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> @@ -70,6 +70,19 @@
>  	status = "disabled";
>  };
>

First of all - it looks like these DTS patches do not depend on DRM
part, do they?

> +&hdmi {
> +	hpd-gpios = <&gpx3 7 GPIO_OPEN_SOURCE>;

Are you sure it is open-source type?

> +	vdd_osc-supply = <&ldo7_reg>;
> +	vdd_pll-supply = <&ldo6_reg>;
> +	vdd-supply = <&ldo6_reg>;
> +	ddc = <&i2c_2>;
> +	status = "okay";
> +};
> +
> +&i2c_2 {
> +	status = "okay";

Hm, what is connected here? Please put it in alphabetical order (so
after hsi2c_4).

Best regards,
Krzysztof


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Milo Kim Aug. 31, 2016, 6:19 a.m. UTC | #2
Hi Krzysztof,

On 08/25/2016 04:05 AM, Krzysztof Kozlowski wrote:
> First of all - it looks like these DTS patches do not depend on DRM
> part, do they?

I just sent the v4 patch for DTS. DRM patch-set was sent separately. 
Thanks for your advise.

Best regards,
Milo
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 39a3b81..2fb5708 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -70,6 +70,19 @@ 
 	status = "disabled";
 };
 
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_OPEN_SOURCE>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+	ddc = <&i2c_2>;
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+};
+
 &hsi2c_4 {
 	status = "okay";