| Message ID | 1472383269-3126-3-git-send-email-ayaka@soulik.info (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On 08/28/2016 01:21 PM, Randy Li wrote: > The TOPEET itop exynos 4412 have three versions base board. The > Elite version is the cheap one without too much peripheral devices > on it. > > Currently supported are serial console, wired networking(USB), > USB OTG in peripheral mode, USB host, SD storage, GPIO buttons, > PWM beeper, ADC and LEDs. > > Signed-off-by: Randy Li <ayaka@soulik.info> > --- > .../bindings/arm/samsung/samsung-boards.txt | 3 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/exynos4412-itop-elite.dts | 148 +++++++++++++++++++++ > 3 files changed, 152 insertions(+) > create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts > > diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > index 0ea7f14..c7159ac 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > @@ -22,6 +22,9 @@ Required root node properties: > * FriendlyARM > - "friendlyarm,tiny4412" - for Exynos4412-based FriendlyARM > TINY4412 board. > + * TOPEET > + - "topeet,itop4412-elite" - for Exynos4412-based TOPEET > + Elite base board. > > * Google > - "google,pi" - for Exynos5800-based Google Peach Pi > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 48e1d4e..8f47aa0 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -135,6 +135,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ > exynos4412-origen.dtb \ > exynos4412-smdk4412.dtb \ > exynos4412-tiny4412.dtb \ > + exynos4412-itop-elite.dtb \ > exynos4412-trats2.dtb > dtb-$(CONFIG_ARCH_EXYNOS5) += \ > exynos5250-arndale.dtb \ > diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts > new file mode 100644 > index 0000000..5688589 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts > @@ -0,0 +1,148 @@ > +/* > + * TOPEET's Exynos4412 based itop board device tree source > + * > + * Copyright (c) 2016 SUMOMO Computer Association > + * https://www.sumomo.mobi > + * Randy Li <ayaka@soulik.info> > + * > + * Device tree source file for TOPEET iTop Exynos 4412 core board > + * which is based on Samsung's Exynos4412 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/dts-v1/; > +#include "exynos4412-itop-scp-core.dtsi" > + > +/ { > + model = "TOPEET iTop 4412 Elite board based on Exynos4412"; > + compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; > + > + chosen { > + bootargs ="console=ttySAC2,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"; Missing space after = > + stdout-path = &serial_2; Instead of "console=xxxx", put everything here: "serial2:115200n8". > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + led2 { > + label = "red:system"; > + gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + linux,default-trigger = "heartbeat"; > + }; > + > + led3 { > + label = "red:user"; > + gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + home { > + label = "GPIO Key Home"; > + linux,code = <KEY_HOME>; > + gpios = <&gpx1 1 GPIO_ACTIVE_LOW>; > + }; > + > + back { > + label = "GPIO Key Back"; > + linux,code = <KEY_BACK>; > + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; > + }; > + > + sleep { > + label = "GPIO Key Sleep"; > + linux,code = <KEY_POWER>; > + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; > + }; > + > + vol_up { No underscores. Add a name of class to the node names for all keys. Like "key-home", "key-back". > + label = "GPIO Key Vol+"; > + linux,code = <KEY_UP>; > + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; > + }; > + > + vol_down { > + label = "GPIO Key Vol-"; > + linux,code = <KEY_DOWN>; > + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + beep { > + compatible = "pwm-beeper"; > + pwms = <&pwm>; > + pinctrl-0 = <&pwm0_out>; > + pinctrl-names = "default"; > + }; > +}; > + > +&pinctrl_1 { > + ether-reset { > + samsung,pins = "gpc0-1"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&sdhci_2 { > + bus-width = <4>; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; > + pinctrl-names = "default"; > + cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>; > + cap-sd-highspeed; > + vmmc-supply = <&ldo23_reg>; > + vqmmc-supply = <&ldo17_reg>; > + status = "okay"; > +}; > + > +&ehci { Alphabetical order. > + status = "okay"; > + /* In order to reset USB ethernet */ > + samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; > + > + port@0 { > + status = "okay"; > + }; > + > + port@2 { > + status = "okay"; > + }; > +}; > + > +&exynos_usbphy { ditto > + status = "okay"; > +}; > + > +&hsotg { ditto > + dr_mode = "peripheral"; > + status = "okay"; > +}; > + > +&serial_1 { > + status = "okay"; > +}; > + > +&serial_2 { > + status = "okay"; > +}; > + > +&pwm { ditto > + pinctrl-0 = <&pwm1_out>; > + pinctrl-names = "default"; > + samsung,pwm-outputs = <1>; > + status = "okay"; > +}; > + > +&adc { ditto Best regards, Krzysztof > + vdd-supply = <&ldo3_reg>; > + status = "okay"; > +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 0ea7f14..c7159ac 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -22,6 +22,9 @@ Required root node properties: * FriendlyARM - "friendlyarm,tiny4412" - for Exynos4412-based FriendlyARM TINY4412 board. + * TOPEET + - "topeet,itop4412-elite" - for Exynos4412-based TOPEET + Elite base board. * Google - "google,pi" - for Exynos5800-based Google Peach Pi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 48e1d4e..8f47aa0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -135,6 +135,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4412-origen.dtb \ exynos4412-smdk4412.dtb \ exynos4412-tiny4412.dtb \ + exynos4412-itop-elite.dtb \ exynos4412-trats2.dtb dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-arndale.dtb \ diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts new file mode 100644 index 0000000..5688589 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -0,0 +1,148 @@ +/* + * TOPEET's Exynos4412 based itop board device tree source + * + * Copyright (c) 2016 SUMOMO Computer Association + * https://www.sumomo.mobi + * Randy Li <ayaka@soulik.info> + * + * Device tree source file for TOPEET iTop Exynos 4412 core board + * which is based on Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos4412-itop-scp-core.dtsi" + +/ { + model = "TOPEET iTop 4412 Elite board based on Exynos4412"; + compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; + + chosen { + bootargs ="console=ttySAC2,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"; + stdout-path = &serial_2; + }; + + leds { + compatible = "gpio-leds"; + + led2 { + label = "red:system"; + gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led3 { + label = "red:user"; + gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + home { + label = "GPIO Key Home"; + linux,code = <KEY_HOME>; + gpios = <&gpx1 1 GPIO_ACTIVE_LOW>; + }; + + back { + label = "GPIO Key Back"; + linux,code = <KEY_BACK>; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + }; + + sleep { + label = "GPIO Key Sleep"; + linux,code = <KEY_POWER>; + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; + }; + + vol_up { + label = "GPIO Key Vol+"; + linux,code = <KEY_UP>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; + }; + + vol_down { + label = "GPIO Key Vol-"; + linux,code = <KEY_DOWN>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; + }; + }; + + beep { + compatible = "pwm-beeper"; + pwms = <&pwm>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; +}; + +&pinctrl_1 { + ether-reset { + samsung,pins = "gpc0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>; + cap-sd-highspeed; + vmmc-supply = <&ldo23_reg>; + vqmmc-supply = <&ldo17_reg>; + status = "okay"; +}; + +&ehci { + status = "okay"; + /* In order to reset USB ethernet */ + samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; + + port@0 { + status = "okay"; + }; + + port@2 { + status = "okay"; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&hsotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&pwm { + pinctrl-0 = <&pwm1_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <1>; + status = "okay"; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; +};
The TOPEET itop exynos 4412 have three versions base board. The Elite version is the cheap one without too much peripheral devices on it. Currently supported are serial console, wired networking(USB), USB OTG in peripheral mode, USB host, SD storage, GPIO buttons, PWM beeper, ADC and LEDs. Signed-off-by: Randy Li <ayaka@soulik.info> --- .../bindings/arm/samsung/samsung-boards.txt | 3 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos4412-itop-elite.dts | 148 +++++++++++++++++++++ 3 files changed, 152 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts