@@ -14,18 +14,13 @@
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/syscore_ops.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
-enum exynos_audss_clk_type {
- TYPE_EXYNOS4210,
- TYPE_EXYNOS5250,
- TYPE_EXYNOS5420,
-};
-
static DEFINE_SPINLOCK(lock);
static struct clk **clk_table;
static void __iomem *reg_base;
@@ -73,14 +68,34 @@ static struct syscore_ops exynos_audss_clk_syscore_ops = {
};
#endif /* CONFIG_PM_SLEEP */
+struct exynos_audss_clk_drvdata {
+ unsigned int has_adma_clk:1;
+ unsigned int enable_epll:1;
+ unsigned int num_clks;
+};
+
+static const struct exynos_audss_clk_drvdata exynos4210_drvdata = {
+ .num_clks = EXYNOS_AUDSS_MAX_CLKS - 1,
+};
+
+static const struct exynos_audss_clk_drvdata exynos5420_drvdata = {
+ .num_clks = EXYNOS_AUDSS_MAX_CLKS,
+ .has_adma_clk = 1,
+ .enable_epll = 1,
+};
+
static const struct of_device_id exynos_audss_clk_of_match[] = {
- { .compatible = "samsung,exynos4210-audss-clock",
- .data = (void *)TYPE_EXYNOS4210, },
- { .compatible = "samsung,exynos5250-audss-clock",
- .data = (void *)TYPE_EXYNOS5250, },
- { .compatible = "samsung,exynos5420-audss-clock",
- .data = (void *)TYPE_EXYNOS5420, },
- {},
+ {
+ .compatible = "samsung,exynos4210-audss-clock",
+ .data = &exynos4210_drvdata,
+ }, {
+ .compatible = "samsung,exynos5250-audss-clock",
+ .data = &exynos4210_drvdata,
+ }, {
+ .compatible = "samsung,exynos5420-audss-clock",
+ .data = &exynos5420_drvdata,
+ },
+ { },
};
static void exynos_audss_clk_teardown(void)
@@ -106,19 +121,17 @@ static void exynos_audss_clk_teardown(void)
/* register exynos_audss clocks */
static int exynos_audss_clk_probe(struct platform_device *pdev)
{
- int i, ret = 0;
- struct resource *res;
const char *mout_audss_p[] = {"fin_pll", "fout_epll"};
const char *mout_i2s_p[] = {"mout_audss", "cdclk0", "sclk_audio0"};
const char *sclk_pcm_p = "sclk_pcm0";
struct clk *pll_ref, *pll_in, *cdclk, *sclk_audio, *sclk_pcm_in;
- const struct of_device_id *match;
- enum exynos_audss_clk_type variant;
+ const struct exynos_audss_clk_drvdata *variant;
+ struct resource *res;
+ int i, ret = 0;
- match = of_match_node(exynos_audss_clk_of_match, pdev->dev.of_node);
- if (!match)
+ variant = of_device_get_match_data(&pdev->dev);
+ if (!variant)
return -EINVAL;
- variant = (enum exynos_audss_clk_type)match->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg_base = devm_ioremap_resource(&pdev->dev, res);
@@ -126,7 +139,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to map audss registers\n");
return PTR_ERR(reg_base);
}
- /* EPLL don't have to be enabled for boards other than Exynos5420 */
+
epll = ERR_PTR(-ENODEV);
clk_table = devm_kzalloc(&pdev->dev,
@@ -136,10 +149,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
return -ENOMEM;
clk_data.clks = clk_table;
- if (variant == TYPE_EXYNOS5420)
- clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS;
- else
- clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS - 1;
+ clk_data.clk_num = variant->num_clks;
pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
pll_in = devm_clk_get(&pdev->dev, "pll_in");
@@ -148,7 +158,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
if (!IS_ERR(pll_in)) {
mout_audss_p[1] = __clk_get_name(pll_in);
- if (variant == TYPE_EXYNOS5420) {
+ if (variant->enable_epll) {
epll = pll_in;
ret = clk_prepare_enable(epll);
@@ -210,7 +220,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
sclk_pcm_p, CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 5, 0, &lock);
- if (variant == TYPE_EXYNOS5420) {
+ if (variant->has_adma_clk) {
clk_table[EXYNOS_ADMA] = clk_register_gate(NULL, "adma",
"dout_srp", CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 9, 0, &lock);
Then variant handling is reworked to make the code simpler when more variants are added. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- drivers/clk/samsung/clk-exynos-audss.c | 64 ++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 27 deletions(-)