@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos5260", "samsung,exynos5";
@@ -181,10 +182,18 @@
reg = <0x100B0000 0x1000>;
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
clock-names = "fin_pll", "mct";
- interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
- <0 107 0>, <0 122 0>, <0 123 0>,
- <0 124 0>, <0 125 0>, <0 126 0>,
- <0 127 0>, <0 128 0>, <0 129 0>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0 129 IRQ_TYPE_LEVEL_HIGH>;
};
cci: cci@10F00000 {
@@ -210,25 +219,25 @@
pinctrl_0: pinctrl@11600000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x11600000 0x1000>;
- interrupts = <0 79 0>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@12290000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x12290000 0x1000>;
- interrupts = <0 157 0>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@128B0000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x128B0000 0x1000>;
- interrupts = <0 243 0>;
+ interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@10D50000 {
@@ -239,7 +248,7 @@
uart0: serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
- interrupts = <0 146 0>;
+ interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -248,7 +257,7 @@
uart1: serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
- interrupts = <0 147 0>;
+ interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -257,7 +266,7 @@
uart2: serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
- interrupts = <0 148 0>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -266,7 +275,7 @@
uart3: serial@12860000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12860000 0x100>;
- interrupts = <0 145 0>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -275,7 +284,7 @@
mmc_0: mmc@12140000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12140000 0x2000>;
- interrupts = <0 156 0>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -287,7 +296,7 @@
mmc_1: mmc@12150000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12150000 0x2000>;
- interrupts = <0 158 0>;
+ interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -299,7 +308,7 @@
mmc_2: mmc@12160000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12160000 0x2000>;
- interrupts = <0 159 0>;
+ interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and generates an error: genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68) The GIC requires shared interrupts to be edge rising or level high. Platform declares support for both. Choose level high everywhere. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Alban Browaeys <alban.browaeys@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 15 deletions(-)