diff mbox

[v3,1/2] ARM: EXYNOS: Remove static mapping of SCU SFR

Message ID 1478693755-11953-2-git-send-email-pankaj.dubey@samsung.com (mailing list archive)
State Changes Requested
Headers show

Commit Message

Pankaj Dubey Nov. 9, 2016, 12:15 p.m. UTC
Lets remove static mapping of SCU SFR mainly used in CORTEX-A9 SoC based
boards. Instead use mapping from device tree node of SCU.

NOTE: This patch has dependency on DT file of any such CORTEX-A9 SoC
based boards, in the absence of SCU device node in DTS file, only single
CPU will boot. So if you are using OUT-OF-TREE DTS file of CORTEX-A9 based
Exynos SoC make sure to add SCU device node to DTS file for SMP boot.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 arch/arm/mach-exynos/common.h                |  1 +
 arch/arm/mach-exynos/exynos.c                | 22 ------------------
 arch/arm/mach-exynos/include/mach/map.h      |  2 --
 arch/arm/mach-exynos/platsmp.c               | 34 +++++++++++++++++++++-------
 arch/arm/mach-exynos/pm.c                    |  4 +---
 arch/arm/mach-exynos/suspend.c               |  4 +---
 arch/arm/plat-samsung/include/plat/map-s5p.h |  4 ----
 7 files changed, 29 insertions(+), 42 deletions(-)

Comments

Krzysztof Kozlowski Nov. 9, 2016, 8:03 p.m. UTC | #1
On Wed, Nov 09, 2016 at 05:45:54PM +0530, Pankaj Dubey wrote:
> Lets remove static mapping of SCU SFR mainly used in CORTEX-A9 SoC based
> boards. Instead use mapping from device tree node of SCU.
> 
> NOTE: This patch has dependency on DT file of any such CORTEX-A9 SoC
> based boards, in the absence of SCU device node in DTS file, only single
> CPU will boot. So if you are using OUT-OF-TREE DTS file of CORTEX-A9 based
> Exynos SoC make sure to add SCU device node to DTS file for SMP boot.
> 
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  arch/arm/mach-exynos/common.h                |  1 +
>  arch/arm/mach-exynos/exynos.c                | 22 ------------------
>  arch/arm/mach-exynos/include/mach/map.h      |  2 --
>  arch/arm/mach-exynos/platsmp.c               | 34 +++++++++++++++++++++-------
>  arch/arm/mach-exynos/pm.c                    |  4 +---
>  arch/arm/mach-exynos/suspend.c               |  4 +---
>  arch/arm/plat-samsung/include/plat/map-s5p.h |  4 ----
>  7 files changed, 29 insertions(+), 42 deletions(-)
>

Applied on a next/soc branch after merging next/dt to preserve
bisectability.

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 9424a8a..dd5d8e8 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -161,6 +161,7 @@  extern void exynos_cpu_restore_register(void);
 extern void exynos_pm_central_suspend(void);
 extern int exynos_pm_central_resume(void);
 extern void exynos_enter_aftr(void);
+extern int exynos_scu_enable(void);
 
 extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
 
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 757fc11..fa08ef9 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -28,15 +28,6 @@ 
 
 #include "common.h"
 
-static struct map_desc exynos4_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-};
-
 static struct platform_device exynos_cpuidle = {
 	.name              = "exynos_cpuidle",
 #ifdef CONFIG_ARM_EXYNOS_CPUIDLE
@@ -99,17 +90,6 @@  static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
 	return 1;
 }
 
-/*
- * exynos_map_io
- *
- * register the standard cpu IO areas
- */
-static void __init exynos_map_io(void)
-{
-	if (soc_is_exynos4())
-		iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-}
-
 static void __init exynos_init_io(void)
 {
 	debug_ll_io_init();
@@ -118,8 +98,6 @@  static void __init exynos_init_io(void)
 
 	/* detect cpu id and rev. */
 	s5p_init_cpu(S5P_VA_CHIPID);
-
-	exynos_map_io();
 }
 
 /*
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 5fb0040..0eef407 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -18,6 +18,4 @@ 
 
 #define EXYNOS_PA_CHIPID		0x10000000
 
-#define EXYNOS4_PA_COREPERI		0x10500000
-
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index a5d6841..94405c7 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -168,6 +168,27 @@  int exynos_cluster_power_state(int cluster)
 		S5P_CORE_LOCAL_PWR_EN);
 }
 
+/**
+ * exynos_scu_enable : enables SCU for Cortex-A9 based system
+ * returns 0 on success else non-zero error code
+ */
+int exynos_scu_enable(void)
+{
+	struct device_node *np;
+	void __iomem *scu_base;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	scu_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!scu_base) {
+		pr_err("%s failed to map scu_base\n", __func__);
+		return -ENOMEM;
+	}
+	scu_enable(scu_base);
+	iounmap(scu_base);
+	return 0;
+}
+
 static void __iomem *cpu_boot_reg_base(void)
 {
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
@@ -224,11 +245,6 @@  static void write_pen_release(int val)
 	sync_cache_w(&pen_release);
 }
 
-static void __iomem *scu_base_addr(void)
-{
-	return (void __iomem *)(S5P_VA_SCU);
-}
-
 static DEFINE_SPINLOCK(boot_lock);
 
 static void exynos_secondary_init(unsigned int cpu)
@@ -393,9 +409,11 @@  static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 
 	exynos_set_delayed_reset_assertion(true);
 
-	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
-		scu_enable(scu_base_addr());
-
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		/* if exynos_scu_enable fails, return */
+		if (exynos_scu_enable())
+			return;
+	}
 	/*
 	 * Write the address of secondary startup into the
 	 * system-wide flags register. The boot monitor waits
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 487295f..c0b46c3 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -26,8 +26,6 @@ 
 #include <asm/suspend.h>
 #include <asm/cacheflush.h>
 
-#include <mach/map.h>
-
 #include "common.h"
 
 static inline void __iomem *exynos_boot_vector_addr(void)
@@ -177,7 +175,7 @@  void exynos_enter_aftr(void)
 	cpu_suspend(0, exynos_aftr_finisher);
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
-		scu_enable(S5P_VA_SCU);
+		exynos_scu_enable();
 		if (call_firmware_op(resume) == -ENOSYS)
 			exynos_cpu_restore_register();
 	}
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 06332f6..73df9f3 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -34,8 +34,6 @@ 
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 
-#include <mach/map.h>
-
 #include <plat/pm-common.h>
 
 #include "common.h"
@@ -462,7 +460,7 @@  static void exynos_pm_resume(void)
 	exynos_pm_release_retention();
 
 	if (cpuid == ARM_CPU_PART_CORTEX_A9)
-		scu_enable(S5P_VA_SCU);
+		exynos_scu_enable();
 
 	if (call_firmware_op(resume) == -ENOSYS
 	    && cpuid == ARM_CPU_PART_CORTEX_A9)
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index 0fe2828..512ed1f 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -15,10 +15,6 @@ 
 
 #define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
 
-#define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
-#define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
-#define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
-
 #define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
 #define VA_VIC0			VA_VIC(0)
 #define VA_VIC1			VA_VIC(1)