| Message ID | 1480481337-3941-1-git-send-email-sw0312.kim@samsung.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
Dear Seung-Woo, I think that this patch looks good to me. But, When I tested this patch on my TM2 board, the flash turn off after some millisecond automatically. It is strange situation. Unfortunately, I don't know the cause. I think that we better to check this issue for more time. Best Regards, Chanwoo Choi On 2016년 11월 30일 13:48, Seung-Woo Kim wrote: > From: Ingi Kim <ingi2.kim@samsung.com> > > This patch adds Kinetic ktd2692 flash led device node for TM2 board. > > Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> > Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> > --- > Change from v1: > - gpio active value is set with defined macro instead of value. > --- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 13 +++++++++++++ > 1 files changed, 13 insertions(+), 0 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > index f21bdc2..0d454aa 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > @@ -58,6 +58,19 @@ > reg = <0x0 0x20000000 0x0 0xc0000000>; > }; > > + camera-flash { > + compatible = "kinetic,ktd2692"; > + ctrl-gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>; > + aux-gpios = <&gpc0 2 GPIO_ACTIVE_HIGH>; > + > + flash-led { > + label = "ktd2692-flash"; > + led-max-microamp = <300000>; > + flash-max-microamp = <1500000>; > + flash-max-timeout-us = <1835000>; > + }; > + }; > + > gpio-keys { > compatible = "gpio-keys"; > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Chanwoo, On 2016년 11월 30일 17:36, Chanwoo Choi wrote: > Dear Seung-Woo, > > I think that this patch looks good to me. > But, When I tested this patch on my TM2 board, > the flash turn off after some millisecond automatically. Thank you for testing on your side. I will check on my side about the issue, and if I find, then I will send next version. Regards, - Seung-Woo Kim > > It is strange situation. Unfortunately, I don't know the cause. > I think that we better to check this issue for more time. > > Best Regards, > Chanwoo Choi > > On 2016년 11월 30일 13:48, Seung-Woo Kim wrote: >> From: Ingi Kim <ingi2.kim@samsung.com> >> >> This patch adds Kinetic ktd2692 flash led device node for TM2 board. >> >> Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> >> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> >> --- >> Change from v1: >> - gpio active value is set with defined macro instead of value. >> --- >> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 13 +++++++++++++ >> 1 files changed, 13 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> index f21bdc2..0d454aa 100644 >> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> @@ -58,6 +58,19 @@ >> reg = <0x0 0x20000000 0x0 0xc0000000>; >> }; >> >> + camera-flash { >> + compatible = "kinetic,ktd2692"; >> + ctrl-gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>; >> + aux-gpios = <&gpc0 2 GPIO_ACTIVE_HIGH>; >> + >> + flash-led { >> + label = "ktd2692-flash"; >> + led-max-microamp = <300000>; >> + flash-max-microamp = <1500000>; >> + flash-max-timeout-us = <1835000>; >> + }; >> + }; >> + >> gpio-keys { >> compatible = "gpio-keys"; >> >> > >
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index f21bdc2..0d454aa 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -58,6 +58,19 @@ reg = <0x0 0x20000000 0x0 0xc0000000>; }; + camera-flash { + compatible = "kinetic,ktd2692"; + ctrl-gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>; + aux-gpios = <&gpc0 2 GPIO_ACTIVE_HIGH>; + + flash-led { + label = "ktd2692-flash"; + led-max-microamp = <300000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1835000>; + }; + }; + gpio-keys { compatible = "gpio-keys";