Message ID | 1484123500-20488-2-git-send-email-a.hajda@samsung.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
On Wed, Jan 11, 2017 at 09:31:39AM +0100, Andrzej Hajda wrote: > HDMI converts RGB/I80 signal from DECON_TV to HDMI/TMDS video stream. > > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> > Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 29 +++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > Thanks, applied. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 80dc0e8..f120d99 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -837,6 +837,35 @@ }; }; + hdmi: hdmi@13970000 { + compatible = "samsung,exynos5433-hdmi"; + reg = <0x13970000 0x70000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_disp CLK_PCLK_HDMI>, + <&cmu_disp CLK_PCLK_HDMIPHY>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>, + <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>, + <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>, + <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>, + <&xxti>, <&cmu_disp CLK_SCLK_HDMI_SPDIF>; + clock-names = "hdmi_pclk", "hdmi_i_pclk", + "i_tmds_clk", "i_pixel_clk", + "tmds_clko", "tmds_clko_user", + "pixel_clko", "pixel_clko_user", + "oscclk", "i_spdif_clk"; + phy = <&hdmiphy>; + ddc = <&hsi2c_11>; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,sysreg-phandle = <&syscon_disp>; + status = "disabled"; + }; + + hdmiphy: hdmiphy@13af0000 { + reg = <0x13af0000 0x80>; + }; + syscon_disp: syscon@13b80000 { compatible = "syscon"; reg = <0x13b80000 0x1010>;