diff mbox

[12/37] PCI: dwc: Create a new config symbol to enable pci dwc host

Message ID 1484216786-17292-13-git-send-email-kishon@ti.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Kishon Vijay Abraham I Jan. 12, 2017, 10:26 a.m. UTC
Now that pci designware host has a separate file, create a new
config symbol to select the host only driver. This is in preparation
to enable endpoint support to designware driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/dwc/Kconfig           |   26 +++++++++++++++-----------
 drivers/pci/dwc/Makefile          |    3 ++-
 drivers/pci/dwc/pcie-designware.h |   29 +++++++++++++++++++++++++----
 3 files changed, 42 insertions(+), 16 deletions(-)

Comments

Joao Pinto Jan. 13, 2017, 5:50 p.m. UTC | #1
Hi Kishon,

Às 10:26 AM de 1/12/2017, Kishon Vijay Abraham I escreveu:
> Now that pci designware host has a separate file, create a new
> config symbol to select the host only driver. This is in preparation
> to enable endpoint support to designware driver.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/pci/dwc/Kconfig           |   26 +++++++++++++++-----------
>  drivers/pci/dwc/Makefile          |    3 ++-
>  drivers/pci/dwc/pcie-designware.h |   29 +++++++++++++++++++++++++----
>  3 files changed, 42 insertions(+), 16 deletions(-)
> 

You are already working in a base where dwc/ already exists. I know you made a
rename / re-structure patch for pci, but I think it was not yet accepted, right?
I don't see it in any of Bjorn' dev branches.

Thanks.

> diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
> index 8b08519..d0bdfb5 100644
> --- a/drivers/pci/dwc/Kconfig
> +++ b/drivers/pci/dwc/Kconfig
> @@ -3,13 +3,17 @@ menu "DesignWare PCI Core Support"
>  
>  config PCIE_DW
>  	bool
> +
> +config PCIE_DW_HOST
> +        bool
>  	depends on PCI_MSI_IRQ_DOMAIN
> +        select PCIE_DW
>  
>  config PCI_DRA7XX
>  	bool "TI DRA7xx PCIe controller"
>  	depends on OF && HAS_IOMEM && TI_PIPE3
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  	help
>  	 Enables support for the PCIe controller in the DRA7xx SoC.  There
>  	 are two instances of PCIe controller in DRA7xx.  This controller can
> @@ -18,7 +22,7 @@ config PCI_DRA7XX
>  config PCIE_DW_PLAT
>  	bool "Platform bus based DesignWare PCIe Controller"
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  	---help---
>  	 This selects the DesignWare PCIe controller support. Select this if
>  	 you have a PCIe controller on Platform bus.
> @@ -32,21 +36,21 @@ config PCI_EXYNOS
>  	depends on SOC_EXYNOS5440 || COMPILE_TEST
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select PCIEPORTBUS
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  
>  config PCI_IMX6
>  	bool "Freescale i.MX6 PCIe controller"
>  	depends on SOC_IMX6Q || COMPILE_TEST
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select PCIEPORTBUS
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  
>  config PCIE_SPEAR13XX
>  	bool "STMicroelectronics SPEAr PCIe controller"
>  	depends on ARCH_SPEAR13XX || COMPILE_TEST
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select PCIEPORTBUS
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  	help
>  	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
>  
> @@ -55,7 +59,7 @@ config PCI_KEYSTONE
>  	depends on ARCH_KEYSTONE || COMPILE_TEST
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select PCIEPORTBUS
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  	help
>  	  Say Y here if you want to enable PCI controller support on Keystone
>  	  SoCs. The PCI controller on Keystone is based on Designware hardware
> @@ -67,7 +71,7 @@ config PCI_LAYERSCAPE
>  	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select MFD_SYSCON
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  	help
>  	  Say Y here if you want PCIe controller support on Layerscape SoCs.
>  
> @@ -76,7 +80,7 @@ config PCI_HISI
>  	bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select PCIEPORTBUS
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  	help
>  	  Say Y here if you want PCIe controller support on HiSilicon
>  	  Hip05 and Hip06 SoCs
> @@ -86,7 +90,7 @@ config PCIE_QCOM
>  	depends on (ARCH_QCOM || COMPILE_TEST) && OF
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select PCIEPORTBUS
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  	help
>  	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
>  	  PCIe controller uses the Designware core plus Qualcomm-specific
> @@ -97,7 +101,7 @@ config PCIE_ARMADA_8K
>  	depends on ARCH_MVEBU || COMPILE_TEST
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select PCIEPORTBUS
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  	help
>  	  Say Y here if you want to enable PCIe controller support on
>  	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
> @@ -109,7 +113,7 @@ config PCIE_ARTPEC6
>  	depends on MACH_ARTPEC6 || COMPILE_TEST
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select PCIEPORTBUS
> -	select PCIE_DW
> +	select PCIE_DW_HOST
>  	help
>  	  Say Y here to enable PCIe controller support on Axis ARTPEC-6
>  	  SoCs.  This PCIe controller uses the DesignWare core.
> diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
> index 3b57e55..a2df13c 100644
> --- a/drivers/pci/dwc/Makefile
> +++ b/drivers/pci/dwc/Makefile
> @@ -1,4 +1,5 @@
> -obj-$(CONFIG_PCIE_DW) += pcie-designware.o pcie-designware-host.o
> +obj-$(CONFIG_PCIE_DW) += pcie-designware.o
> +obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
>  obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
>  obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
>  obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
> index 808d17b..8f3dcb2 100644
> --- a/drivers/pci/dwc/pcie-designware.h
> +++ b/drivers/pci/dwc/pcie-designware.h
> @@ -162,10 +162,6 @@ struct dw_pcie {
>  
>  int dw_pcie_read(void __iomem *addr, int size, u32 *val);
>  int dw_pcie_write(void __iomem *addr, int size, u32 val);
> -irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
> -void dw_pcie_msi_init(struct pcie_port *pp);
> -void dw_pcie_setup_rc(struct pcie_port *pp);
> -int dw_pcie_host_init(struct pcie_port *pp);
>  
>  u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg);
>  void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val);
> @@ -175,4 +171,29 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
>  			       int type, u64 cpu_addr, u64 pci_addr,
>  			       u32 size);
>  void dw_pcie_setup(struct dw_pcie *pci);
> +
> +#ifdef CONFIG_PCIE_DW_HOST
> +irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
> +void dw_pcie_msi_init(struct pcie_port *pp);
> +void dw_pcie_setup_rc(struct pcie_port *pp);
> +int dw_pcie_host_init(struct pcie_port *pp);
> +#else
> +static inline irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
> +{
> +	return IRQ_NONE;
> +}
> +
> +static inline void dw_pcie_msi_init(struct pcie_port *pp)
> +{
> +}
> +
> +static inline void dw_pcie_setup_rc(struct pcie_port *pp)
> +{
> +}
> +
> +static inline int dw_pcie_host_init(struct pcie_port *pp)
> +{
> +	return 0;
> +}
> +#endif
>  #endif /* _PCIE_DESIGNWARE_H */
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I Jan. 16, 2017, 5:22 a.m. UTC | #2
Hi Joao,

On Friday 13 January 2017 11:20 PM, Joao Pinto wrote:
> Hi Kishon,
> 
> Às 10:26 AM de 1/12/2017, Kishon Vijay Abraham I escreveu:
>> Now that pci designware host has a separate file, create a new
>> config symbol to select the host only driver. This is in preparation
>> to enable endpoint support to designware driver.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  drivers/pci/dwc/Kconfig           |   26 +++++++++++++++-----------
>>  drivers/pci/dwc/Makefile          |    3 ++-
>>  drivers/pci/dwc/pcie-designware.h |   29 +++++++++++++++++++++++++----
>>  3 files changed, 42 insertions(+), 16 deletions(-)
>>
> 
> You are already working in a base where dwc/ already exists. I know you made a
> rename / re-structure patch for pci, but I think it was not yet accepted, right?
> I don't see it in any of Bjorn' dev branches.

He said he'll merge that a little later.

Thanks
Kishon

> 
> Thanks.
> 
>> diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
>> index 8b08519..d0bdfb5 100644
>> --- a/drivers/pci/dwc/Kconfig
>> +++ b/drivers/pci/dwc/Kconfig
>> @@ -3,13 +3,17 @@ menu "DesignWare PCI Core Support"
>>  
>>  config PCIE_DW
>>  	bool
>> +
>> +config PCIE_DW_HOST
>> +        bool
>>  	depends on PCI_MSI_IRQ_DOMAIN
>> +        select PCIE_DW
>>  
>>  config PCI_DRA7XX
>>  	bool "TI DRA7xx PCIe controller"
>>  	depends on OF && HAS_IOMEM && TI_PIPE3
>>  	depends on PCI_MSI_IRQ_DOMAIN
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  	help
>>  	 Enables support for the PCIe controller in the DRA7xx SoC.  There
>>  	 are two instances of PCIe controller in DRA7xx.  This controller can
>> @@ -18,7 +22,7 @@ config PCI_DRA7XX
>>  config PCIE_DW_PLAT
>>  	bool "Platform bus based DesignWare PCIe Controller"
>>  	depends on PCI_MSI_IRQ_DOMAIN
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  	---help---
>>  	 This selects the DesignWare PCIe controller support. Select this if
>>  	 you have a PCIe controller on Platform bus.
>> @@ -32,21 +36,21 @@ config PCI_EXYNOS
>>  	depends on SOC_EXYNOS5440 || COMPILE_TEST
>>  	depends on PCI_MSI_IRQ_DOMAIN
>>  	select PCIEPORTBUS
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  
>>  config PCI_IMX6
>>  	bool "Freescale i.MX6 PCIe controller"
>>  	depends on SOC_IMX6Q || COMPILE_TEST
>>  	depends on PCI_MSI_IRQ_DOMAIN
>>  	select PCIEPORTBUS
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  
>>  config PCIE_SPEAR13XX
>>  	bool "STMicroelectronics SPEAr PCIe controller"
>>  	depends on ARCH_SPEAR13XX || COMPILE_TEST
>>  	depends on PCI_MSI_IRQ_DOMAIN
>>  	select PCIEPORTBUS
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  	help
>>  	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
>>  
>> @@ -55,7 +59,7 @@ config PCI_KEYSTONE
>>  	depends on ARCH_KEYSTONE || COMPILE_TEST
>>  	depends on PCI_MSI_IRQ_DOMAIN
>>  	select PCIEPORTBUS
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  	help
>>  	  Say Y here if you want to enable PCI controller support on Keystone
>>  	  SoCs. The PCI controller on Keystone is based on Designware hardware
>> @@ -67,7 +71,7 @@ config PCI_LAYERSCAPE
>>  	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
>>  	depends on PCI_MSI_IRQ_DOMAIN
>>  	select MFD_SYSCON
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  	help
>>  	  Say Y here if you want PCIe controller support on Layerscape SoCs.
>>  
>> @@ -76,7 +80,7 @@ config PCI_HISI
>>  	bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
>>  	depends on PCI_MSI_IRQ_DOMAIN
>>  	select PCIEPORTBUS
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  	help
>>  	  Say Y here if you want PCIe controller support on HiSilicon
>>  	  Hip05 and Hip06 SoCs
>> @@ -86,7 +90,7 @@ config PCIE_QCOM
>>  	depends on (ARCH_QCOM || COMPILE_TEST) && OF
>>  	depends on PCI_MSI_IRQ_DOMAIN
>>  	select PCIEPORTBUS
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  	help
>>  	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
>>  	  PCIe controller uses the Designware core plus Qualcomm-specific
>> @@ -97,7 +101,7 @@ config PCIE_ARMADA_8K
>>  	depends on ARCH_MVEBU || COMPILE_TEST
>>  	depends on PCI_MSI_IRQ_DOMAIN
>>  	select PCIEPORTBUS
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  	help
>>  	  Say Y here if you want to enable PCIe controller support on
>>  	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
>> @@ -109,7 +113,7 @@ config PCIE_ARTPEC6
>>  	depends on MACH_ARTPEC6 || COMPILE_TEST
>>  	depends on PCI_MSI_IRQ_DOMAIN
>>  	select PCIEPORTBUS
>> -	select PCIE_DW
>> +	select PCIE_DW_HOST
>>  	help
>>  	  Say Y here to enable PCIe controller support on Axis ARTPEC-6
>>  	  SoCs.  This PCIe controller uses the DesignWare core.
>> diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
>> index 3b57e55..a2df13c 100644
>> --- a/drivers/pci/dwc/Makefile
>> +++ b/drivers/pci/dwc/Makefile
>> @@ -1,4 +1,5 @@
>> -obj-$(CONFIG_PCIE_DW) += pcie-designware.o pcie-designware-host.o
>> +obj-$(CONFIG_PCIE_DW) += pcie-designware.o
>> +obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
>>  obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
>>  obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
>>  obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
>> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
>> index 808d17b..8f3dcb2 100644
>> --- a/drivers/pci/dwc/pcie-designware.h
>> +++ b/drivers/pci/dwc/pcie-designware.h
>> @@ -162,10 +162,6 @@ struct dw_pcie {
>>  
>>  int dw_pcie_read(void __iomem *addr, int size, u32 *val);
>>  int dw_pcie_write(void __iomem *addr, int size, u32 val);
>> -irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
>> -void dw_pcie_msi_init(struct pcie_port *pp);
>> -void dw_pcie_setup_rc(struct pcie_port *pp);
>> -int dw_pcie_host_init(struct pcie_port *pp);
>>  
>>  u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg);
>>  void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val);
>> @@ -175,4 +171,29 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
>>  			       int type, u64 cpu_addr, u64 pci_addr,
>>  			       u32 size);
>>  void dw_pcie_setup(struct dw_pcie *pci);
>> +
>> +#ifdef CONFIG_PCIE_DW_HOST
>> +irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
>> +void dw_pcie_msi_init(struct pcie_port *pp);
>> +void dw_pcie_setup_rc(struct pcie_port *pp);
>> +int dw_pcie_host_init(struct pcie_port *pp);
>> +#else
>> +static inline irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
>> +{
>> +	return IRQ_NONE;
>> +}
>> +
>> +static inline void dw_pcie_msi_init(struct pcie_port *pp)
>> +{
>> +}
>> +
>> +static inline void dw_pcie_setup_rc(struct pcie_port *pp)
>> +{
>> +}
>> +
>> +static inline int dw_pcie_host_init(struct pcie_port *pp)
>> +{
>> +	return 0;
>> +}
>> +#endif
>>  #endif /* _PCIE_DESIGNWARE_H */
>>
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
index 8b08519..d0bdfb5 100644
--- a/drivers/pci/dwc/Kconfig
+++ b/drivers/pci/dwc/Kconfig
@@ -3,13 +3,17 @@  menu "DesignWare PCI Core Support"
 
 config PCIE_DW
 	bool
+
+config PCIE_DW_HOST
+        bool
 	depends on PCI_MSI_IRQ_DOMAIN
+        select PCIE_DW
 
 config PCI_DRA7XX
 	bool "TI DRA7xx PCIe controller"
 	depends on OF && HAS_IOMEM && TI_PIPE3
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIE_DW
+	select PCIE_DW_HOST
 	help
 	 Enables support for the PCIe controller in the DRA7xx SoC.  There
 	 are two instances of PCIe controller in DRA7xx.  This controller can
@@ -18,7 +22,7 @@  config PCI_DRA7XX
 config PCIE_DW_PLAT
 	bool "Platform bus based DesignWare PCIe Controller"
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIE_DW
+	select PCIE_DW_HOST
 	---help---
 	 This selects the DesignWare PCIe controller support. Select this if
 	 you have a PCIe controller on Platform bus.
@@ -32,21 +36,21 @@  config PCI_EXYNOS
 	depends on SOC_EXYNOS5440 || COMPILE_TEST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
-	select PCIE_DW
+	select PCIE_DW_HOST
 
 config PCI_IMX6
 	bool "Freescale i.MX6 PCIe controller"
 	depends on SOC_IMX6Q || COMPILE_TEST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
-	select PCIE_DW
+	select PCIE_DW_HOST
 
 config PCIE_SPEAR13XX
 	bool "STMicroelectronics SPEAr PCIe controller"
 	depends on ARCH_SPEAR13XX || COMPILE_TEST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
-	select PCIE_DW
+	select PCIE_DW_HOST
 	help
 	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
 
@@ -55,7 +59,7 @@  config PCI_KEYSTONE
 	depends on ARCH_KEYSTONE || COMPILE_TEST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
-	select PCIE_DW
+	select PCIE_DW_HOST
 	help
 	  Say Y here if you want to enable PCI controller support on Keystone
 	  SoCs. The PCI controller on Keystone is based on Designware hardware
@@ -67,7 +71,7 @@  config PCI_LAYERSCAPE
 	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
 	depends on PCI_MSI_IRQ_DOMAIN
 	select MFD_SYSCON
-	select PCIE_DW
+	select PCIE_DW_HOST
 	help
 	  Say Y here if you want PCIe controller support on Layerscape SoCs.
 
@@ -76,7 +80,7 @@  config PCI_HISI
 	bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
-	select PCIE_DW
+	select PCIE_DW_HOST
 	help
 	  Say Y here if you want PCIe controller support on HiSilicon
 	  Hip05 and Hip06 SoCs
@@ -86,7 +90,7 @@  config PCIE_QCOM
 	depends on (ARCH_QCOM || COMPILE_TEST) && OF
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
-	select PCIE_DW
+	select PCIE_DW_HOST
 	help
 	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
 	  PCIe controller uses the Designware core plus Qualcomm-specific
@@ -97,7 +101,7 @@  config PCIE_ARMADA_8K
 	depends on ARCH_MVEBU || COMPILE_TEST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
-	select PCIE_DW
+	select PCIE_DW_HOST
 	help
 	  Say Y here if you want to enable PCIe controller support on
 	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
@@ -109,7 +113,7 @@  config PCIE_ARTPEC6
 	depends on MACH_ARTPEC6 || COMPILE_TEST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
-	select PCIE_DW
+	select PCIE_DW_HOST
 	help
 	  Say Y here to enable PCIe controller support on Axis ARTPEC-6
 	  SoCs.  This PCIe controller uses the DesignWare core.
diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
index 3b57e55..a2df13c 100644
--- a/drivers/pci/dwc/Makefile
+++ b/drivers/pci/dwc/Makefile
@@ -1,4 +1,5 @@ 
-obj-$(CONFIG_PCIE_DW) += pcie-designware.o pcie-designware-host.o
+obj-$(CONFIG_PCIE_DW) += pcie-designware.o
+obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
 obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
 obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
 obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
index 808d17b..8f3dcb2 100644
--- a/drivers/pci/dwc/pcie-designware.h
+++ b/drivers/pci/dwc/pcie-designware.h
@@ -162,10 +162,6 @@  struct dw_pcie {
 
 int dw_pcie_read(void __iomem *addr, int size, u32 *val);
 int dw_pcie_write(void __iomem *addr, int size, u32 val);
-irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
-void dw_pcie_msi_init(struct pcie_port *pp);
-void dw_pcie_setup_rc(struct pcie_port *pp);
-int dw_pcie_host_init(struct pcie_port *pp);
 
 u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg);
 void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val);
@@ -175,4 +171,29 @@  void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
 			       int type, u64 cpu_addr, u64 pci_addr,
 			       u32 size);
 void dw_pcie_setup(struct dw_pcie *pci);
+
+#ifdef CONFIG_PCIE_DW_HOST
+irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
+void dw_pcie_msi_init(struct pcie_port *pp);
+void dw_pcie_setup_rc(struct pcie_port *pp);
+int dw_pcie_host_init(struct pcie_port *pp);
+#else
+static inline irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
+{
+	return IRQ_NONE;
+}
+
+static inline void dw_pcie_msi_init(struct pcie_port *pp)
+{
+}
+
+static inline void dw_pcie_setup_rc(struct pcie_port *pp)
+{
+}
+
+static inline int dw_pcie_host_init(struct pcie_port *pp)
+{
+	return 0;
+}
+#endif
 #endif /* _PCIE_DESIGNWARE_H */