| Message ID | 1484665444-23365-2-git-send-email-pankaj.dubey@samsung.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Tue, Jan 17, 2017 at 08:34:03PM +0530, Pankaj Dubey wrote: > From: Vivek Gautam <gautamvivek1987@gmail.com> > > Add USB 3.0 DRD controller device node, with its clock > and phy information to enable the same on Exynos7. > > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > Signed-off-by: Vivek Gautam <gautamvivek1987@gmail.com> > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Javier's Reviewed-by should be at the end. > --- > arch/arm64/boot/dts/exynos/exynos7.dtsi | 34 +++++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > index 9080a11..a2d8d11 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -603,6 +603,40 @@ > #include "exynos7-trip-points.dtsi" > }; > }; > + > + usbdrd_phy: phy@15500000 { > + compatible = "samsung,exynos7-usbdrd-phy"; > + reg = <0x15500000 0x100>; > + clocks = <&clock_fsys0 ACLK_USBDRD300>, > + <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>, > + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, > + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>, > + <&clock_fsys0 SCLK_USBDRD300_REFCLK>; > + clock-names = "phy", "ref", "phy_pipe", > + "phy_utmi", "itp"; > + samsung,pmu-syscon = <&pmu_system_controller>; > + #phy-cells = <1>; > + }; > + > + usbdrd3: usb@15400000 { > + compatible = "samsung,exynos7-dwusb3"; > + clocks = <&clock_fsys0 ACLK_USBDRD300>, > + <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, > + <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>; > + clock-names = "usbdrd30", "usbdrd30_susp_clk", > + "usbdrd30_axius_clk"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + dwc3 { dtc should complain here - you need: dwc3@15400000 In the same time I think the address node does not have to be put after parent's usb. Best regards, Krzysztof > + compatible = "snps,dwc3"; > + reg = <0x15400000 0x10000>; > + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + }; > }; > }; > > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tuesday 17 January 2017 11:53 PM, Krzysztof Kozlowski wrote: > On Tue, Jan 17, 2017 at 08:34:03PM +0530, Pankaj Dubey wrote: >> From: Vivek Gautam <gautamvivek1987@gmail.com> >> >> Add USB 3.0 DRD controller device node, with its clock >> and phy information to enable the same on Exynos7. >> >> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> >> Signed-off-by: Vivek Gautam <gautamvivek1987@gmail.com> >> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > > Javier's Reviewed-by should be at the end. > OK, will update. >> --- >> arch/arm64/boot/dts/exynos/exynos7.dtsi | 34 +++++++++++++++++++++++++++++++++ >> 1 file changed, 34 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi >> index 9080a11..a2d8d11 100644 >> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi >> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi >> @@ -603,6 +603,40 @@ >> #include "exynos7-trip-points.dtsi" >> }; >> }; >> + >> + usbdrd_phy: phy@15500000 { >> + compatible = "samsung,exynos7-usbdrd-phy"; >> + reg = <0x15500000 0x100>; >> + clocks = <&clock_fsys0 ACLK_USBDRD300>, >> + <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>, >> + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, >> + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>, >> + <&clock_fsys0 SCLK_USBDRD300_REFCLK>; >> + clock-names = "phy", "ref", "phy_pipe", >> + "phy_utmi", "itp"; >> + samsung,pmu-syscon = <&pmu_system_controller>; >> + #phy-cells = <1>; >> + }; >> + >> + usbdrd3: usb@15400000 { >> + compatible = "samsung,exynos7-dwusb3"; >> + clocks = <&clock_fsys0 ACLK_USBDRD300>, >> + <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, >> + <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>; >> + clock-names = "usbdrd30", "usbdrd30_susp_clk", >> + "usbdrd30_axius_clk"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + dwc3 { > > dtc should complain here - you need: > dwc3@15400000 No, it didn't complain. Anyway, I will update as it's already taken care in other Exynos SoC DTSi files. > In the same time I think the address node does not have to be put after > parent's usb. > OK, will update. Thanks, Pankaj Dubey > Best regards, > Krzysztof > >> + compatible = "snps,dwc3"; >> + reg = <0x15400000 0x10000>; >> + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; >> + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; >> + phy-names = "usb2-phy", "usb3-phy"; >> + }; >> + }; >> }; >> }; >> >> -- >> 2.7.4 >> > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Pankaj, On Wed, Jan 18, 2017 at 12:16 AM, pankaj.dubey <pankaj.dubey@samsung.com> wrote: > On Tuesday 17 January 2017 11:53 PM, Krzysztof Kozlowski wrote: [snip] >>> + >>> + dwc3 { >> >> dtc should complain here - you need: >> dwc3@15400000 > > No, it didn't complain. Anyway, I will update as it's already taken care > in other Exynos SoC DTSi files. > It only complains if you run dtc with warnings enabled, i.e: make W=1 exynos7-espresso.dtb Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 9080a11..a2d8d11 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -603,6 +603,40 @@ #include "exynos7-trip-points.dtsi" }; }; + + usbdrd_phy: phy@15500000 { + compatible = "samsung,exynos7-usbdrd-phy"; + reg = <0x15500000 0x100>; + clocks = <&clock_fsys0 ACLK_USBDRD300>, + <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>, + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>, + <&clock_fsys0 SCLK_USBDRD300_REFCLK>; + clock-names = "phy", "ref", "phy_pipe", + "phy_utmi", "itp"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + + usbdrd3: usb@15400000 { + compatible = "samsung,exynos7-dwusb3"; + clocks = <&clock_fsys0 ACLK_USBDRD300>, + <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, + <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>; + clock-names = "usbdrd30", "usbdrd30_susp_clk", + "usbdrd30_axius_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "snps,dwc3"; + reg = <0x15400000 0x10000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; }; };