| Message ID | 1484721173-30474-3-git-send-email-pankaj.dubey@samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
Hi, On Wed, Jan 18, 2017 at 3:32 PM, Pankaj Dubey <pankaj.dubey@samsung.com> wrote: > From: Vivek Gautam <gautamvivek1987@gmail.com> > > Adding fixed voltage regulators for Vbus and Vbus-boost required > by USB 3.0 DRD controller on Exynos7-espresso board. > > Signed-off-by: Vivek Gautam <gautamvivek1987@gmail.com> > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> > arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 45 +++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > index 1b2db9f0..e4705fd 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts > @@ -13,6 +13,7 @@ > #include "exynos7.dtsi" > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/clock/samsung,s2mps11.h> > +#include <dt-bindings/gpio/gpio.h> > > / { > model = "Samsung Exynos7 Espresso board based on EXYNOS7"; > @@ -32,6 +33,29 @@ > device_type = "memory"; > reg = <0x0 0x40000000 0x0 0xC0000000>; > }; > + > + usb30_vbus_reg: regulator-usb30 { > + compatible = "regulator-fixed"; > + regulator-name = "VBUS_5V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gph1 1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb30_vbus_en>; > + enable-active-high; > + }; > + > + usb3drd_boost_5v: regulator-usb3drd-boost { > + compatible = "regulator-fixed"; > + regulator-name = "VUSB_VBUS_5V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb3drd_boost_en>; > + enable-active-high; > + }; > + > }; > > &fin_pll { > @@ -365,3 +389,24 @@ > vqmmc-supply = <&ldo2_reg>; > disable-wp; > }; > + > +&usbdrd_phy { > + vbus-supply = <&usb30_vbus_reg>; > + vbus-boost-supply = <&usb3drd_boost_5v>; > +}; > + > +&pinctrl_bus1 { > + usb30_vbus_en: usb30-vbus-en { > + samsung,pins = "gph1-1"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; > + }; > + > + usb3drd_boost_en: usb3drd-boost-en { > + samsung,pins = "gpf4-1"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; > + }; > +}; > -- > 2.7.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Wed, Jan 18, 2017 at 12:02:53PM +0530, Pankaj Dubey wrote: > From: Vivek Gautam <gautamvivek1987@gmail.com> > > Adding fixed voltage regulators for Vbus and Vbus-boost required > by USB 3.0 DRD controller on Exynos7-espresso board. > > Signed-off-by: Vivek Gautam <gautamvivek1987@gmail.com> > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 45 +++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > Thanks, applied with re-ordered nodes. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 1b2db9f0..e4705fd 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -13,6 +13,7 @@ #include "exynos7.dtsi" #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Exynos7 Espresso board based on EXYNOS7"; @@ -32,6 +33,29 @@ device_type = "memory"; reg = <0x0 0x40000000 0x0 0xC0000000>; }; + + usb30_vbus_reg: regulator-usb30 { + compatible = "regulator-fixed"; + regulator-name = "VBUS_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph1 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_vbus_en>; + enable-active-high; + }; + + usb3drd_boost_5v: regulator-usb3drd-boost { + compatible = "regulator-fixed"; + regulator-name = "VUSB_VBUS_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3drd_boost_en>; + enable-active-high; + }; + }; &fin_pll { @@ -365,3 +389,24 @@ vqmmc-supply = <&ldo2_reg>; disable-wp; }; + +&usbdrd_phy { + vbus-supply = <&usb30_vbus_reg>; + vbus-boost-supply = <&usb3drd_boost_5v>; +}; + +&pinctrl_bus1 { + usb30_vbus_en: usb30-vbus-en { + samsung,pins = "gph1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + usb3drd_boost_en: usb3drd-boost-en { + samsung,pins = "gpf4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +};