[5/7] drm/exynos/decon5433: add support for interlace modes

Commit Message

Andrzej Hajda Jan. 20, 2017, 6:52 a.m. UTC

Some registers should be programmed differently in interlace mode.
Additionally IP does not signal stop state properly in interlaced
mode, so warning has been removed.

Signed-off-by: Andrzej Hajda <[e-mail]>
---
 drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 45 +++++++++++++++++++--------
 include/video/exynos5433_decon.h              |  1 +
 2 files changed, 33 insertions(+), 13 deletions(-)

Patch

diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
index 042d6ef..46434ba9 100644
--- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
+++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
@@ -146,6 +146,7 @@  static void decon_commit(struct exynos_drm_crtc *crtc)
 {
 	struct decon_context *ctx = crtc->ctx;
 	struct drm_display_mode *m = &crtc->base.mode;
+	bool interlaced = false;
 	u32 val;
 
 	if (test_bit(BIT_SUSPENDED, &ctx->flags))
@@ -156,12 +157,16 @@  static void decon_commit(struct exynos_drm_crtc *crtc)
 		m->crtc_hsync_end = m->crtc_htotal - 92;
 		m->crtc_vsync_start = m->crtc_vdisplay + 1;
 		m->crtc_vsync_end = m->crtc_vsync_start + 1;
+		if (m->flags & DRM_MODE_FLAG_INTERLACE)
+			interlaced = true;
 	}
 
 	decon_setup_trigger(ctx);
 
 	/* lcd on and use command if */
 	val = VIDOUT_LCD_ON;
+	if (interlaced)
+		val |= VIDOUT_INTERLACE_EN_F;
 	if (ctx->out_type & IFTYPE_I80) {
 		val |= VIDOUT_COMMAND_IF;
 	} else {
@@ -170,15 +175,21 @@  static void decon_commit(struct exynos_drm_crtc *crtc)
 
 	writel(val, ctx->addr + DECON_VIDOUTCON0);
 
-	val = VIDTCON2_LINEVAL(m->vdisplay - 1) |
-		VIDTCON2_HOZVAL(m->hdisplay - 1);
+	if (interlaced)
+		val = VIDTCON2_LINEVAL(m->vdisplay / 2 - 1) |
+			VIDTCON2_HOZVAL(m->hdisplay - 1);
+	else
+		val = VIDTCON2_LINEVAL(m->vdisplay - 1) |
+			VIDTCON2_HOZVAL(m->hdisplay - 1);
 	writel(val, ctx->addr + DECON_VIDTCON2);
 
 	if (!(ctx->out_type & IFTYPE_I80)) {
-		val = VIDTCON00_VBPD_F(
-				m->crtc_vtotal - m->crtc_vsync_end - 1) |
-			VIDTCON00_VFPD_F(
-				m->crtc_vsync_start - m->crtc_vdisplay - 1);
+		int vbp = m->crtc_vtotal - m->crtc_vsync_end;
+		int vfp = m->crtc_vsync_start - m->crtc_vdisplay;
+
+		if (interlaced)
+			vbp = vbp / 2 - 1;
+		val = VIDTCON00_VBPD_F(vbp - 1) | VIDTCON00_VFPD_F(vfp - 1);
 		writel(val, ctx->addr + DECON_VIDTCON00);
 
 		val = VIDTCON01_VSPW_F(
@@ -293,12 +304,22 @@  static void decon_update_plane(struct exynos_drm_crtc *crtc,
 	if (test_bit(BIT_SUSPENDED, &ctx->flags))
 		return;
 
-	val = COORDINATE_X(state->crtc.x) | COORDINATE_Y(state->crtc.y);
-	writel(val, ctx->addr + DECON_VIDOSDxA(win));
+	if (crtc->base.mode.flags & DRM_MODE_FLAG_INTERLACE) {
+		val = COORDINATE_X(state->crtc.x) |
+			COORDINATE_Y(state->crtc.y / 2);
+		writel(val, ctx->addr + DECON_VIDOSDxA(win));
+
+		val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) |
+			COORDINATE_Y((state->crtc.y + state->crtc.h) / 2 - 1);
+		writel(val, ctx->addr + DECON_VIDOSDxB(win));
+	} else {
+		val = COORDINATE_X(state->crtc.x) | COORDINATE_Y(state->crtc.y);
+		writel(val, ctx->addr + DECON_VIDOSDxA(win));
 
-	val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) |
-		COORDINATE_Y(state->crtc.y + state->crtc.h - 1);
-	writel(val, ctx->addr + DECON_VIDOSDxB(win));
+		val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) |
+				COORDINATE_Y(state->crtc.y + state->crtc.h - 1);
+		writel(val, ctx->addr + DECON_VIDOSDxB(win));
+	}
 
 	val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) |
 		VIDOSD_Wx_ALPHA_B_F(0x0);
@@ -370,8 +391,6 @@  static void decon_swreset(struct decon_context *ctx)
 		udelay(10);
 	}
 
-	WARN(tries == 0, "failed to disable DECON\n");
-
 	writel(VIDCON0_SWRESET, ctx->addr + DECON_VIDCON0);
 	for (tries = 2000; tries; --tries) {
 		if (~readl(ctx->addr + DECON_VIDCON0) & VIDCON0_SWRESET)
diff --git a/include/video/exynos5433_decon.h b/include/video/exynos5433_decon.h
index 0098a52..b26511a 100644
--- a/include/video/exynos5433_decon.h
+++ b/include/video/exynos5433_decon.h
@@ -89,6 +89,7 @@ 
 #define VIDCON0_ENVID_F			(1 << 0)
 
 /* VIDOUTCON0 */
+#define VIDOUT_INTERLACE_EN_F		(1 << 28)
 #define VIDOUT_LCD_ON			(1 << 24)
 #define VIDOUT_IF_F_MASK		(0x3 << 20)
 #define VIDOUT_RGB_IF			(0x0 << 20)