| Message ID | 1485250055-22137-5-git-send-email-m.szyprowski@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On 24 January 2017 at 10:27, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > This patch replaces irq-safe runtime PM with non-irq-safe version based on > the new approach. Existing, irq-safe runtime PM implementation for PL330 was > not bringing much benefits of its own - only clocks were enabled/disabled. > > Till now non-irq-safe runtime PM implementation was only possible by calling > pm_runtime_get/put functions from alloc/free_chan_resources. All other DMA > engine API functions cannot be called from a context, which permits sleeping. > Such implementation, in practice would result in keeping DMA controller's > device active almost all the time, because most of the slave device drivers > (DMA engine clients) acquire DMA channel in their probe() function and > released it during driver removal. > > This patch provides a new, different approach. It is based on an observation > that there can be only one slave device using each DMA channel. PL330 hardware > always has dedicated channels for each peripheral device. Using recently > introduced device dependencies (links) infrastructure one can ensure proper > runtime PM state of PL330 DMA controller basing on the runtime PM state of > the slave device. > > In this approach in pl330_alloc_chan_resources() function a new dependency > is being created between PL330 DMA controller device (as a supplier) and > given slave device (as a consumer). This way PL330 DMA controller device > runtime active counter is increased when the slave device is resumed and > decreased the same time when given slave device is put to suspend. This way > it has been ensured to keep PL330 DMA controller runtime active if there is > an active used of any of its DMA channels. Slave device pointer is initially > stored in per-channel data in of_dma_xlate callback. This is similar to what > has been already implemented in Exynos IOMMU driver in commit 2f5f44f205cc95 > ("iommu/exynos: Use device dependency links to control runtime pm"). > > If slave device doesn't implement runtime PM or keeps device runtime active > all the time, then PL330 DMA controller will be runtime active all the time > when channel is being allocated. The goal is however to have runtime PM I would remove everything after "The goal is however.." from this section. Instead, what I think is important to state (may be added in the first section in the change log) is however another limitation with irq-safe runtime PM. That is, it may prevent the generic PM domain (genpd) from being powered off, particularly in cases when the genpd doesn't have the GENPD_FLAG_IRQ_SAFE set. > added to all devices in the system, because it lets respective power > domains to be turned off, what gives the best results in terms of power > saving. > > If one requests memory-to-memory channel, runtime active counter is > increased unconditionally. This might be a drawback of this approach, but > PL330 is not really used for memory-to-memory operations due to poor > performance in such operations compared to the CPU. > > Introducing non-irq-safe runtime power management finally allows to turn off > audio power domain on Exynos5 SoCs. > > Removal of irq-safe runtime PM is based on the revert of the following > commits: > 1. commit 5c9e6c2b2ba3 "dmaengine: pl330: fix runtime pm support" > 2. commit 81cc6edc0870 "dmaengine: pl330: Fix hang on dmaengine_terminate_all > on certain boards" > 3. commit ae43b3289186 "ARM: 8202/1: dmaengine: pl330: Add runtime Power > Management support v12" > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> > Acked-by: Arnd Bergmann <arnd@arndb.de> Nice work! Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Kind regards Uffe > --- > drivers/dma/pl330.c | 166 +++++++++++++++++++++------------------------------- > 1 file changed, 66 insertions(+), 100 deletions(-) > > diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c > index c77a3494659c..dff7228198f6 100644 > --- a/drivers/dma/pl330.c > +++ b/drivers/dma/pl330.c > @@ -268,9 +268,6 @@ enum pl330_byteswap { > > #define NR_DEFAULT_DESC 16 > > -/* Delay for runtime PM autosuspend, ms */ > -#define PL330_AUTOSUSPEND_DELAY 20 > - > /* Populated by the PL330 core driver for DMA API driver's info */ > struct pl330_config { > u32 periph_id; > @@ -449,8 +446,8 @@ struct dma_pl330_chan { > bool cyclic; > > /* for runtime pm tracking */ > - bool active; > struct device *slave; > + struct device_link *slave_link; > }; > > struct pl330_dmac { > @@ -2008,7 +2005,6 @@ static void pl330_tasklet(unsigned long data) > struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data; > struct dma_pl330_desc *desc, *_dt; > unsigned long flags; > - bool power_down = false; > > spin_lock_irqsave(&pch->lock, flags); > > @@ -2023,18 +2019,10 @@ static void pl330_tasklet(unsigned long data) > /* Try to submit a req imm. next to the last completed cookie */ > fill_queue(pch); > > - if (list_empty(&pch->work_list)) { > - spin_lock(&pch->thread->dmac->lock); > - _stop(pch->thread); > - spin_unlock(&pch->thread->dmac->lock); > - power_down = true; > - pch->active = false; > - } else { > - /* Make sure the PL330 Channel thread is active */ > - spin_lock(&pch->thread->dmac->lock); > - _start(pch->thread); > - spin_unlock(&pch->thread->dmac->lock); > - } > + /* Make sure the PL330 Channel thread is active */ > + spin_lock(&pch->thread->dmac->lock); > + _start(pch->thread); > + spin_unlock(&pch->thread->dmac->lock); > > while (!list_empty(&pch->completed_list)) { > struct dmaengine_desc_callback cb; > @@ -2047,13 +2035,6 @@ static void pl330_tasklet(unsigned long data) > if (pch->cyclic) { > desc->status = PREP; > list_move_tail(&desc->node, &pch->work_list); > - if (power_down) { > - pch->active = true; > - spin_lock(&pch->thread->dmac->lock); > - _start(pch->thread); > - spin_unlock(&pch->thread->dmac->lock); > - power_down = false; > - } > } else { > desc->status = FREE; > list_move_tail(&desc->node, &pch->dmac->desc_pool); > @@ -2068,12 +2049,6 @@ static void pl330_tasklet(unsigned long data) > } > } > spin_unlock_irqrestore(&pch->lock, flags); > - > - /* If work list empty, power down */ > - if (power_down) { > - pm_runtime_mark_last_busy(pch->dmac->ddma.dev); > - pm_runtime_put_autosuspend(pch->dmac->ddma.dev); > - } > } > > static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec, > @@ -2105,11 +2080,63 @@ static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec, > return dma_get_slave_channel(&pl330->peripherals[chan_id].chan); > } > > +static int pl330_add_slave_pm_link(struct pl330_dmac *pl330, > + struct dma_pl330_chan *pch) > +{ > + int i; > + > + /* No slave device means memory-to-memory channels */ > + if (!pch->slave) > + return pm_runtime_get_sync(pl330->ddma.dev); > + > + /* > + * No additional locking is needed, {alloc,free}_chan_resources > + * are called under dma_list_mutex in dmaengine core > + */ > + for (i = 0; i < pl330->num_peripherals; i++) { > + if (pl330->peripherals[i].slave == pch->slave && > + pl330->peripherals[i].slave_link) { > + pch->slave_link = pl330->peripherals[i].slave_link; > + return 0; > + } > + } > + > + pch->slave_link = device_link_add(pch->slave, pl330->ddma.dev, > + DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE); > + if (!pch->slave_link) > + return -ENODEV; > + > + return 0; > +} > + > +static void pl330_del_slave_pm_link(struct pl330_dmac *pl330, > + struct dma_pl330_chan *pch) > +{ > + struct device_link *link = pch->slave_link; > + int i, count = 0; > + > + if (!pch->slave) > + pm_runtime_put(pl330->ddma.dev); > + > + for (i = 0; i < pl330->num_peripherals; i++) > + if (pl330->peripherals[i].slave_link == link) > + count++; > + > + pch->slave_link = NULL; > + if (count == 1) > + device_link_del(link); > +} > + > static int pl330_alloc_chan_resources(struct dma_chan *chan) > { > struct dma_pl330_chan *pch = to_pchan(chan); > struct pl330_dmac *pl330 = pch->dmac; > unsigned long flags; > + int ret; > + > + ret = pl330_add_slave_pm_link(pl330, pch); > + if (ret < 0) > + return ret; > > spin_lock_irqsave(&pl330->lock, flags); > > @@ -2119,6 +2146,7 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan) > pch->thread = pl330_request_channel(pl330); > if (!pch->thread) { > spin_unlock_irqrestore(&pl330->lock, flags); > + pl330_del_slave_pm_link(pl330, pch); > return -ENOMEM; > } > > @@ -2160,9 +2188,7 @@ static int pl330_terminate_all(struct dma_chan *chan) > unsigned long flags; > struct pl330_dmac *pl330 = pch->dmac; > LIST_HEAD(list); > - bool power_down = false; > > - pm_runtime_get_sync(pl330->ddma.dev); > spin_lock_irqsave(&pch->lock, flags); > spin_lock(&pl330->lock); > _stop(pch->thread); > @@ -2171,8 +2197,6 @@ static int pl330_terminate_all(struct dma_chan *chan) > pch->thread->req[0].desc = NULL; > pch->thread->req[1].desc = NULL; > pch->thread->req_running = -1; > - power_down = pch->active; > - pch->active = false; > > /* Mark all desc done */ > list_for_each_entry(desc, &pch->submitted_list, node) { > @@ -2189,10 +2213,6 @@ static int pl330_terminate_all(struct dma_chan *chan) > list_splice_tail_init(&pch->work_list, &pl330->desc_pool); > list_splice_tail_init(&pch->completed_list, &pl330->desc_pool); > spin_unlock_irqrestore(&pch->lock, flags); > - pm_runtime_mark_last_busy(pl330->ddma.dev); > - if (power_down) > - pm_runtime_put_autosuspend(pl330->ddma.dev); > - pm_runtime_put_autosuspend(pl330->ddma.dev); > > return 0; > } > @@ -2210,7 +2230,6 @@ static int pl330_pause(struct dma_chan *chan) > struct pl330_dmac *pl330 = pch->dmac; > unsigned long flags; > > - pm_runtime_get_sync(pl330->ddma.dev); > spin_lock_irqsave(&pch->lock, flags); > > spin_lock(&pl330->lock); > @@ -2218,8 +2237,6 @@ static int pl330_pause(struct dma_chan *chan) > spin_unlock(&pl330->lock); > > spin_unlock_irqrestore(&pch->lock, flags); > - pm_runtime_mark_last_busy(pl330->ddma.dev); > - pm_runtime_put_autosuspend(pl330->ddma.dev); > > return 0; > } > @@ -2232,7 +2249,6 @@ static void pl330_free_chan_resources(struct dma_chan *chan) > > tasklet_kill(&pch->task); > > - pm_runtime_get_sync(pch->dmac->ddma.dev); > spin_lock_irqsave(&pl330->lock, flags); > > pl330_release_channel(pch->thread); > @@ -2242,19 +2258,17 @@ static void pl330_free_chan_resources(struct dma_chan *chan) > list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool); > > spin_unlock_irqrestore(&pl330->lock, flags); > - pm_runtime_mark_last_busy(pch->dmac->ddma.dev); > - pm_runtime_put_autosuspend(pch->dmac->ddma.dev); > + > + pl330_del_slave_pm_link(pl330, pch); > } > > static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch, > struct dma_pl330_desc *desc) > { > struct pl330_thread *thrd = pch->thread; > - struct pl330_dmac *pl330 = pch->dmac; > void __iomem *regs = thrd->dmac->base; > u32 val, addr; > > - pm_runtime_get_sync(pl330->ddma.dev); > val = addr = 0; > if (desc->rqcfg.src_inc) { > val = readl(regs + SA(thrd->id)); > @@ -2263,8 +2277,6 @@ static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch, > val = readl(regs + DA(thrd->id)); > addr = desc->px.dst_addr; > } > - pm_runtime_mark_last_busy(pch->dmac->ddma.dev); > - pm_runtime_put_autosuspend(pl330->ddma.dev); > > /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */ > if (!val) > @@ -2350,16 +2362,6 @@ static void pl330_issue_pending(struct dma_chan *chan) > unsigned long flags; > > spin_lock_irqsave(&pch->lock, flags); > - if (list_empty(&pch->work_list)) { > - /* > - * Warn on nothing pending. Empty submitted_list may > - * break our pm_runtime usage counter as it is > - * updated on work_list emptiness status. > - */ > - WARN_ON(list_empty(&pch->submitted_list)); > - pch->active = true; > - pm_runtime_get_sync(pch->dmac->ddma.dev); > - } > list_splice_tail_init(&pch->submitted_list, &pch->work_list); > spin_unlock_irqrestore(&pch->lock, flags); > > @@ -2787,44 +2789,12 @@ static irqreturn_t pl330_irq_handler(int irq, void *data) > BIT(DMA_SLAVE_BUSWIDTH_8_BYTES) > > /* > - * Runtime PM callbacks are provided by amba/bus.c driver. > - * > - * It is assumed here that IRQ safe runtime PM is chosen in probe and amba > - * bus driver will only disable/enable the clock in runtime PM callbacks. > + * Runtime PM callbacks are provided by amba/bus.c driver, system sleep > + * suspend/resume is implemented by generic helpers, which use existing > + * runtime PM callbacks. > */ > -static int __maybe_unused pl330_suspend(struct device *dev) > -{ > - struct amba_device *pcdev = to_amba_device(dev); > - > - pm_runtime_disable(dev); > - > - if (!pm_runtime_status_suspended(dev)) { > - /* amba did not disable the clock */ > - amba_pclk_disable(pcdev); > - } > - amba_pclk_unprepare(pcdev); > - > - return 0; > -} > - > -static int __maybe_unused pl330_resume(struct device *dev) > -{ > - struct amba_device *pcdev = to_amba_device(dev); > - int ret; > - > - ret = amba_pclk_prepare(pcdev); > - if (ret) > - return ret; > - > - if (!pm_runtime_status_suspended(dev)) > - ret = amba_pclk_enable(pcdev); > - > - pm_runtime_enable(dev); > - > - return ret; > -} > - > -static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume); > +static SIMPLE_DEV_PM_OPS(pl330_pm, pm_runtime_force_suspend, > + pm_runtime_force_resume); > > static int > pl330_probe(struct amba_device *adev, const struct amba_id *id) > @@ -2977,11 +2947,7 @@ static int __maybe_unused pl330_resume(struct device *dev) > pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan, > pcfg->num_peri, pcfg->num_events); > > - pm_runtime_irq_safe(&adev->dev); > - pm_runtime_use_autosuspend(&adev->dev); > - pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY); > - pm_runtime_mark_last_busy(&adev->dev); > - pm_runtime_put_autosuspend(&adev->dev); > + pm_runtime_put(&adev->dev); > > return 0; > probe_err3: > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index c77a3494659c..dff7228198f6 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -268,9 +268,6 @@ enum pl330_byteswap { #define NR_DEFAULT_DESC 16 -/* Delay for runtime PM autosuspend, ms */ -#define PL330_AUTOSUSPEND_DELAY 20 - /* Populated by the PL330 core driver for DMA API driver's info */ struct pl330_config { u32 periph_id; @@ -449,8 +446,8 @@ struct dma_pl330_chan { bool cyclic; /* for runtime pm tracking */ - bool active; struct device *slave; + struct device_link *slave_link; }; struct pl330_dmac { @@ -2008,7 +2005,6 @@ static void pl330_tasklet(unsigned long data) struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data; struct dma_pl330_desc *desc, *_dt; unsigned long flags; - bool power_down = false; spin_lock_irqsave(&pch->lock, flags); @@ -2023,18 +2019,10 @@ static void pl330_tasklet(unsigned long data) /* Try to submit a req imm. next to the last completed cookie */ fill_queue(pch); - if (list_empty(&pch->work_list)) { - spin_lock(&pch->thread->dmac->lock); - _stop(pch->thread); - spin_unlock(&pch->thread->dmac->lock); - power_down = true; - pch->active = false; - } else { - /* Make sure the PL330 Channel thread is active */ - spin_lock(&pch->thread->dmac->lock); - _start(pch->thread); - spin_unlock(&pch->thread->dmac->lock); - } + /* Make sure the PL330 Channel thread is active */ + spin_lock(&pch->thread->dmac->lock); + _start(pch->thread); + spin_unlock(&pch->thread->dmac->lock); while (!list_empty(&pch->completed_list)) { struct dmaengine_desc_callback cb; @@ -2047,13 +2035,6 @@ static void pl330_tasklet(unsigned long data) if (pch->cyclic) { desc->status = PREP; list_move_tail(&desc->node, &pch->work_list); - if (power_down) { - pch->active = true; - spin_lock(&pch->thread->dmac->lock); - _start(pch->thread); - spin_unlock(&pch->thread->dmac->lock); - power_down = false; - } } else { desc->status = FREE; list_move_tail(&desc->node, &pch->dmac->desc_pool); @@ -2068,12 +2049,6 @@ static void pl330_tasklet(unsigned long data) } } spin_unlock_irqrestore(&pch->lock, flags); - - /* If work list empty, power down */ - if (power_down) { - pm_runtime_mark_last_busy(pch->dmac->ddma.dev); - pm_runtime_put_autosuspend(pch->dmac->ddma.dev); - } } static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec, @@ -2105,11 +2080,63 @@ static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec, return dma_get_slave_channel(&pl330->peripherals[chan_id].chan); } +static int pl330_add_slave_pm_link(struct pl330_dmac *pl330, + struct dma_pl330_chan *pch) +{ + int i; + + /* No slave device means memory-to-memory channels */ + if (!pch->slave) + return pm_runtime_get_sync(pl330->ddma.dev); + + /* + * No additional locking is needed, {alloc,free}_chan_resources + * are called under dma_list_mutex in dmaengine core + */ + for (i = 0; i < pl330->num_peripherals; i++) { + if (pl330->peripherals[i].slave == pch->slave && + pl330->peripherals[i].slave_link) { + pch->slave_link = pl330->peripherals[i].slave_link; + return 0; + } + } + + pch->slave_link = device_link_add(pch->slave, pl330->ddma.dev, + DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE); + if (!pch->slave_link) + return -ENODEV; + + return 0; +} + +static void pl330_del_slave_pm_link(struct pl330_dmac *pl330, + struct dma_pl330_chan *pch) +{ + struct device_link *link = pch->slave_link; + int i, count = 0; + + if (!pch->slave) + pm_runtime_put(pl330->ddma.dev); + + for (i = 0; i < pl330->num_peripherals; i++) + if (pl330->peripherals[i].slave_link == link) + count++; + + pch->slave_link = NULL; + if (count == 1) + device_link_del(link); +} + static int pl330_alloc_chan_resources(struct dma_chan *chan) { struct dma_pl330_chan *pch = to_pchan(chan); struct pl330_dmac *pl330 = pch->dmac; unsigned long flags; + int ret; + + ret = pl330_add_slave_pm_link(pl330, pch); + if (ret < 0) + return ret; spin_lock_irqsave(&pl330->lock, flags); @@ -2119,6 +2146,7 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan) pch->thread = pl330_request_channel(pl330); if (!pch->thread) { spin_unlock_irqrestore(&pl330->lock, flags); + pl330_del_slave_pm_link(pl330, pch); return -ENOMEM; } @@ -2160,9 +2188,7 @@ static int pl330_terminate_all(struct dma_chan *chan) unsigned long flags; struct pl330_dmac *pl330 = pch->dmac; LIST_HEAD(list); - bool power_down = false; - pm_runtime_get_sync(pl330->ddma.dev); spin_lock_irqsave(&pch->lock, flags); spin_lock(&pl330->lock); _stop(pch->thread); @@ -2171,8 +2197,6 @@ static int pl330_terminate_all(struct dma_chan *chan) pch->thread->req[0].desc = NULL; pch->thread->req[1].desc = NULL; pch->thread->req_running = -1; - power_down = pch->active; - pch->active = false; /* Mark all desc done */ list_for_each_entry(desc, &pch->submitted_list, node) { @@ -2189,10 +2213,6 @@ static int pl330_terminate_all(struct dma_chan *chan) list_splice_tail_init(&pch->work_list, &pl330->desc_pool); list_splice_tail_init(&pch->completed_list, &pl330->desc_pool); spin_unlock_irqrestore(&pch->lock, flags); - pm_runtime_mark_last_busy(pl330->ddma.dev); - if (power_down) - pm_runtime_put_autosuspend(pl330->ddma.dev); - pm_runtime_put_autosuspend(pl330->ddma.dev); return 0; } @@ -2210,7 +2230,6 @@ static int pl330_pause(struct dma_chan *chan) struct pl330_dmac *pl330 = pch->dmac; unsigned long flags; - pm_runtime_get_sync(pl330->ddma.dev); spin_lock_irqsave(&pch->lock, flags); spin_lock(&pl330->lock); @@ -2218,8 +2237,6 @@ static int pl330_pause(struct dma_chan *chan) spin_unlock(&pl330->lock); spin_unlock_irqrestore(&pch->lock, flags); - pm_runtime_mark_last_busy(pl330->ddma.dev); - pm_runtime_put_autosuspend(pl330->ddma.dev); return 0; } @@ -2232,7 +2249,6 @@ static void pl330_free_chan_resources(struct dma_chan *chan) tasklet_kill(&pch->task); - pm_runtime_get_sync(pch->dmac->ddma.dev); spin_lock_irqsave(&pl330->lock, flags); pl330_release_channel(pch->thread); @@ -2242,19 +2258,17 @@ static void pl330_free_chan_resources(struct dma_chan *chan) list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool); spin_unlock_irqrestore(&pl330->lock, flags); - pm_runtime_mark_last_busy(pch->dmac->ddma.dev); - pm_runtime_put_autosuspend(pch->dmac->ddma.dev); + + pl330_del_slave_pm_link(pl330, pch); } static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch, struct dma_pl330_desc *desc) { struct pl330_thread *thrd = pch->thread; - struct pl330_dmac *pl330 = pch->dmac; void __iomem *regs = thrd->dmac->base; u32 val, addr; - pm_runtime_get_sync(pl330->ddma.dev); val = addr = 0; if (desc->rqcfg.src_inc) { val = readl(regs + SA(thrd->id)); @@ -2263,8 +2277,6 @@ static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch, val = readl(regs + DA(thrd->id)); addr = desc->px.dst_addr; } - pm_runtime_mark_last_busy(pch->dmac->ddma.dev); - pm_runtime_put_autosuspend(pl330->ddma.dev); /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */ if (!val) @@ -2350,16 +2362,6 @@ static void pl330_issue_pending(struct dma_chan *chan) unsigned long flags; spin_lock_irqsave(&pch->lock, flags); - if (list_empty(&pch->work_list)) { - /* - * Warn on nothing pending. Empty submitted_list may - * break our pm_runtime usage counter as it is - * updated on work_list emptiness status. - */ - WARN_ON(list_empty(&pch->submitted_list)); - pch->active = true; - pm_runtime_get_sync(pch->dmac->ddma.dev); - } list_splice_tail_init(&pch->submitted_list, &pch->work_list); spin_unlock_irqrestore(&pch->lock, flags); @@ -2787,44 +2789,12 @@ static irqreturn_t pl330_irq_handler(int irq, void *data) BIT(DMA_SLAVE_BUSWIDTH_8_BYTES) /* - * Runtime PM callbacks are provided by amba/bus.c driver. - * - * It is assumed here that IRQ safe runtime PM is chosen in probe and amba - * bus driver will only disable/enable the clock in runtime PM callbacks. + * Runtime PM callbacks are provided by amba/bus.c driver, system sleep + * suspend/resume is implemented by generic helpers, which use existing + * runtime PM callbacks. */ -static int __maybe_unused pl330_suspend(struct device *dev) -{ - struct amba_device *pcdev = to_amba_device(dev); - - pm_runtime_disable(dev); - - if (!pm_runtime_status_suspended(dev)) { - /* amba did not disable the clock */ - amba_pclk_disable(pcdev); - } - amba_pclk_unprepare(pcdev); - - return 0; -} - -static int __maybe_unused pl330_resume(struct device *dev) -{ - struct amba_device *pcdev = to_amba_device(dev); - int ret; - - ret = amba_pclk_prepare(pcdev); - if (ret) - return ret; - - if (!pm_runtime_status_suspended(dev)) - ret = amba_pclk_enable(pcdev); - - pm_runtime_enable(dev); - - return ret; -} - -static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume); +static SIMPLE_DEV_PM_OPS(pl330_pm, pm_runtime_force_suspend, + pm_runtime_force_resume); static int pl330_probe(struct amba_device *adev, const struct amba_id *id) @@ -2977,11 +2947,7 @@ static int __maybe_unused pl330_resume(struct device *dev) pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan, pcfg->num_peri, pcfg->num_events); - pm_runtime_irq_safe(&adev->dev); - pm_runtime_use_autosuspend(&adev->dev); - pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY); - pm_runtime_mark_last_busy(&adev->dev); - pm_runtime_put_autosuspend(&adev->dev); + pm_runtime_put(&adev->dev); return 0; probe_err3:
This patch replaces irq-safe runtime PM with non-irq-safe version based on the new approach. Existing, irq-safe runtime PM implementation for PL330 was not bringing much benefits of its own - only clocks were enabled/disabled. Till now non-irq-safe runtime PM implementation was only possible by calling pm_runtime_get/put functions from alloc/free_chan_resources. All other DMA engine API functions cannot be called from a context, which permits sleeping. Such implementation, in practice would result in keeping DMA controller's device active almost all the time, because most of the slave device drivers (DMA engine clients) acquire DMA channel in their probe() function and released it during driver removal. This patch provides a new, different approach. It is based on an observation that there can be only one slave device using each DMA channel. PL330 hardware always has dedicated channels for each peripheral device. Using recently introduced device dependencies (links) infrastructure one can ensure proper runtime PM state of PL330 DMA controller basing on the runtime PM state of the slave device. In this approach in pl330_alloc_chan_resources() function a new dependency is being created between PL330 DMA controller device (as a supplier) and given slave device (as a consumer). This way PL330 DMA controller device runtime active counter is increased when the slave device is resumed and decreased the same time when given slave device is put to suspend. This way it has been ensured to keep PL330 DMA controller runtime active if there is an active used of any of its DMA channels. Slave device pointer is initially stored in per-channel data in of_dma_xlate callback. This is similar to what has been already implemented in Exynos IOMMU driver in commit 2f5f44f205cc95 ("iommu/exynos: Use device dependency links to control runtime pm"). If slave device doesn't implement runtime PM or keeps device runtime active all the time, then PL330 DMA controller will be runtime active all the time when channel is being allocated. The goal is however to have runtime PM added to all devices in the system, because it lets respective power domains to be turned off, what gives the best results in terms of power saving. If one requests memory-to-memory channel, runtime active counter is increased unconditionally. This might be a drawback of this approach, but PL330 is not really used for memory-to-memory operations due to poor performance in such operations compared to the CPU. Introducing non-irq-safe runtime power management finally allows to turn off audio power domain on Exynos5 SoCs. Removal of irq-safe runtime PM is based on the revert of the following commits: 1. commit 5c9e6c2b2ba3 "dmaengine: pl330: fix runtime pm support" 2. commit 81cc6edc0870 "dmaengine: pl330: Fix hang on dmaengine_terminate_all on certain boards" 3. commit ae43b3289186 "ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12" Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> --- drivers/dma/pl330.c | 166 +++++++++++++++++++++------------------------------- 1 file changed, 66 insertions(+), 100 deletions(-)