| Message ID | 1487761474-11547-1-git-send-email-a.hajda@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Hi Andrzej, On Wed, Feb 22, 2017 at 12:04:34PM +0100, Andrzej Hajda wrote: > In case of arbitration lost adequate interrupt sometimes is not signaled. > As a result transfer timeouts and is not retried, as it should. To avoid > such cases code is added to check transaction status in case of every > interrupt. > > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> you forgot: Tested-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> in any case I tested it again on tm2e with next-20170223. Thanks, Andi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 23.02.2017 07:29, Andi Shyti wrote: > Hi Andrzej, > > On Wed, Feb 22, 2017 at 12:04:34PM +0100, Andrzej Hajda wrote: >> In case of arbitration lost adequate interrupt sometimes is not signaled. >> As a result transfer timeouts and is not retried, as it should. To avoid >> such cases code is added to check transaction status in case of every >> interrupt. >> >> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > you forgot: > > Tested-by: Andi Shyti <andi.shyti@samsung.com> > Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Oops, my fault. > > in any case I tested it again on tm2e with next-20170223. Thanks again for testing. Regards Andrzej > > Thanks, > Andi > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Feb 22, 2017 at 12:04:34PM +0100, Andrzej Hajda wrote: > In case of arbitration lost adequate interrupt sometimes is not signaled. > As a result transfer timeouts and is not retried, as it should. To avoid > such cases code is added to check transaction status in case of every > interrupt. > > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Applied to for-next (will be in this merge window), thanks!
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index 00e81e3..cbd93ce 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -130,12 +130,32 @@ /* I2C_TRANS_STATUS register bits */ #define HSI2C_MASTER_BUSY (1u << 17) #define HSI2C_SLAVE_BUSY (1u << 16) + +/* I2C_TRANS_STATUS register bits for Exynos5 variant */ #define HSI2C_TIMEOUT_AUTO (1u << 4) #define HSI2C_NO_DEV (1u << 3) #define HSI2C_NO_DEV_ACK (1u << 2) #define HSI2C_TRANS_ABORT (1u << 1) #define HSI2C_TRANS_DONE (1u << 0) +/* I2C_TRANS_STATUS register bits for Exynos7 variant */ +#define HSI2C_MASTER_ST_MASK 0xf +#define HSI2C_MASTER_ST_IDLE 0x0 +#define HSI2C_MASTER_ST_START 0x1 +#define HSI2C_MASTER_ST_RESTART 0x2 +#define HSI2C_MASTER_ST_STOP 0x3 +#define HSI2C_MASTER_ST_MASTER_ID 0x4 +#define HSI2C_MASTER_ST_ADDR0 0x5 +#define HSI2C_MASTER_ST_ADDR1 0x6 +#define HSI2C_MASTER_ST_ADDR2 0x7 +#define HSI2C_MASTER_ST_ADDR_SR 0x8 +#define HSI2C_MASTER_ST_READ 0x9 +#define HSI2C_MASTER_ST_WRITE 0xa +#define HSI2C_MASTER_ST_NO_ACK 0xb +#define HSI2C_MASTER_ST_LOSE 0xc +#define HSI2C_MASTER_ST_WAIT 0xd +#define HSI2C_MASTER_ST_WAIT_CMD 0xe + /* I2C_ADDR register bits */ #define HSI2C_SLV_ADDR_SLV(x) ((x & 0x3ff) << 0) #define HSI2C_SLV_ADDR_MAS(x) ((x & 0x3ff) << 10) @@ -437,6 +457,7 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) int_status = readl(i2c->regs + HSI2C_INT_STATUS); writel(int_status, i2c->regs + HSI2C_INT_STATUS); + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); /* handle interrupt related to the transfer status */ if (i2c->variant->hw == HSI2C_EXYNOS7) { @@ -460,8 +481,12 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) i2c->state = -ETIMEDOUT; goto stop; } + + if ((trans_status & HSI2C_MASTER_ST_MASK) == HSI2C_MASTER_ST_LOSE) { + i2c->state = -EAGAIN; + goto stop; + } } else if (int_status & HSI2C_INT_I2C) { - trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); if (trans_status & HSI2C_NO_DEV_ACK) { dev_dbg(i2c->dev, "No ACK from device\n"); i2c->state = -ENXIO;
In case of arbitration lost adequate interrupt sometimes is not signaled. As a result transfer timeouts and is not retried, as it should. To avoid such cases code is added to check transaction status in case of every interrupt. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> --- Hi Wolfram, I have postponed this patch because I was looking for better solution, but it seems that this patch together with 'disable fifo-almost-empty...' patch solves the issue of arbitration lost completely. The patch has been adjusted according to your comment. Regards Andrzej v2: - replaced switch with if clause, - commit message fits 75 chars limit. drivers/i2c/busses/i2c-exynos5.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)