diff mbox

[2/9] dt-bindings: exynos5433-decon: fix interrupts bindings

Message ID 1491377317-8042-3-git-send-email-a.hajda@samsung.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Andrzej Hajda April 5, 2017, 7:28 a.m. UTC
DECON requires different interrupts depending on mode of work, which
depends on panel it is connected to.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
 .../devicetree/bindings/display/exynos/exynos5433-decon.txt  | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox


diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
index c9fd7b3..ba6be99 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
@@ -8,12 +8,12 @@  Required properties:
 - compatible: value should be one of:
 	"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
 - reg: physical base address and length of the DECON registers set.
-- interrupts: should contain a list of all DECON IP block interrupts in the
-	      order: VSYNC, LCD_SYSTEM. The interrupt specifier format
-	      depends on the interrupt controller used.
-- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
-		   in the same order as they were listed in the interrupts
-		   property.
+- interrupt-names: should contain the interrupt names depending on mode of work:
+		video mode: "vsync",
+		command mode: "lcd_sys".
+- interrupts or interrupts-extended: list of interrupt specifiers corresponding
+		to names privided in interrupt-names, as described in
+		interrupt-controller/interrupts.txt
 - clocks: must include clock specifiers corresponding to entries in the
 	  clock-names property.
 - clock-names: list of clock names sorted in the same order as the clocks