diff mbox

[3/9] dt-bindings: exynos5433-decon: add TE interrupt binding

Message ID 1491377317-8042-4-git-send-email-a.hajda@samsung.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Andrzej Hajda April 5, 2017, 7:28 a.m. UTC
DECON command mode can use hardware trigger where transmission
is triggered automatically, or software trigger - where TE interrupt
handler should trigger transmission.
DECON will use software trigger if TE interrupt is specified.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
 Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox


diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
index ba6be99..549c538 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
@@ -10,7 +10,8 @@  Required properties:
 - reg: physical base address and length of the DECON registers set.
 - interrupt-names: should contain the interrupt names depending on mode of work:
 		video mode: "vsync",
-		command mode: "lcd_sys".
+		command mode: "lcd_sys",
+		command mode with software trigger: "lcd_sys", "te".
 - interrupts or interrupts-extended: list of interrupt specifiers corresponding
 		to names privided in interrupt-names, as described in