diff mbox

arm64: dts: exynos: remove num-slots from exynos platforms

Message ID 1499159859-67028-1-git-send-email-shawn.lin@rock-chips.com (mailing list archive)
State Accepted
Headers show

Commit Message

Shawn Lin July 4, 2017, 9:17 a.m. UTC
dwmmc driver deprecated num-slots and plan to get rid
of it finally. Just move a step to cleanup it from DT.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 --
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts       | 2 --
 2 files changed, 4 deletions(-)

Comments

Jaehoon Chung July 5, 2017, 2:25 a.m. UTC | #1
On 07/04/2017 06:17 PM, Shawn Lin wrote:
> dwmmc driver deprecated num-slots and plan to get rid
> of it finally. Just move a step to cleanup it from DT.
> 
> Cc: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

> ---
> 
>  arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 --
>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts       | 2 --
>  2 files changed, 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> index e2b0da2..7f693ae 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> @@ -846,7 +846,6 @@
>  
>  &mshc_0 {
>  	status = "okay";
> -	num-slots = <1>;
>  	mmc-hs200-1_8v;
>  	mmc-hs400-1_8v;
>  	cap-mmc-highspeed;
> @@ -868,7 +867,6 @@
>  
>  &mshc_2 {
>  	status = "okay";
> -	num-slots = <1>;
>  	cap-sd-highspeed;
>  	disable-wp;
>  	cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> index e5892bb..4a8b1fb 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> @@ -359,7 +359,6 @@
>  
>  &mmc_0 {
>  	status = "okay";
> -	num-slots = <1>;
>  	cap-mmc-highspeed;
>  	mmc-hs200-1_8v;
>  	non-removable;
> @@ -375,7 +374,6 @@
>  
>  &mmc_2 {
>  	status = "okay";
> -	num-slots = <1>;
>  	cap-sd-highspeed;
>  	card-detect-delay = <200>;
>  	clock-frequency = <400000000>;
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Krzysztof Kozlowski July 18, 2017, 5:15 a.m. UTC | #2
On Tue, Jul 04, 2017 at 05:17:39PM +0800, Shawn Lin wrote:
> dwmmc driver deprecated num-slots and plan to get rid
> of it finally. Just move a step to cleanup it from DT.
> 
> Cc: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
> 
>  arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 --
>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts       | 2 --
>  2 files changed, 4 deletions(-)
> 

Thanks, applied.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index e2b0da2..7f693ae 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -846,7 +846,6 @@ 
 
 &mshc_0 {
 	status = "okay";
-	num-slots = <1>;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
@@ -868,7 +867,6 @@ 
 
 &mshc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	disable-wp;
 	cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index e5892bb..4a8b1fb 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -359,7 +359,6 @@ 
 
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	non-removable;
@@ -375,7 +374,6 @@ 
 
 &mmc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;