diff mbox

[10/12] ARM: dts: exynos5250: add DSI node

Message ID 1527501272-16365-1-git-send-email-m.purski@samsung.com (mailing list archive)
State Superseded
Headers show

Commit Message

Maciej Purski May 28, 2018, 9:54 a.m. UTC
The patch adds common part of DSI node for Exynos5250 platforms.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maciej Purski <m.purski@samsung.com>
---
 arch/arm/boot/dts/exynos5250.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Krzysztof Kozlowski May 28, 2018, 4:36 p.m. UTC | #1
On Mon, May 28, 2018 at 11:54 AM, Maciej Purski <m.purski@samsung.com> wrote:
> The patch adds common part of DSI node for Exynos5250 platforms.
>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Maciej Purski <m.purski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5250.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)


This should be squashed with previous patch because it is logically
the same feature. The purpose of PHY is this DSI node so splitting it
is slightly too much.

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index a63b655..7403b96 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -739,6 +739,20 @@ 
 			syscon = <&pmu_system_controller>;
 		};
 
+		dsi_0: dsi@14500000 {
+			compatible = "samsung,exynos4210-mipi-dsi";
+			reg = <0x14500000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,power-domain = <&pd_disp1>;
+			phys = <&mipi_phy 3>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>;
+			clock-names = "bus_clk", "sclk_mipi";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		adc: adc@12d10000 {
 			compatible = "samsung,exynos-adc-v1";
 			reg = <0x12D10000 0x100>;