diff mbox series

[v7,05/13] dt-bindings: ddr: add LPDDR3 memories

Message ID 1557155521-30949-6-git-send-email-l.luba@partner.samsung.com (mailing list archive)
State Changes Requested
Headers show
Series Exynos5 Dynamic Memory Controller driver | expand

Commit Message

Lukasz Luba May 6, 2019, 3:11 p.m. UTC 
Specifies the AC timing parameters of the LPDDR3 memory device.

Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
 .../devicetree/bindings/ddr/lpddr3-timings.txt     | 58 +++++++++++++
 Documentation/devicetree/bindings/ddr/lpddr3.txt   | 97 ++++++++++++++++++++++
 2 files changed, 155 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
 create mode 100644 Documentation/devicetree/bindings/ddr/lpddr3.txt

Comments

Rob Herring May 7, 2019, 5 p.m. UTC | #1 
On Mon, May 06, 2019 at 05:11:53PM +0200, Lukasz Luba wrote:
> Specifies the AC timing parameters of the LPDDR3 memory device.
> 
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
>  .../devicetree/bindings/ddr/lpddr3-timings.txt     | 58 +++++++++++++
>  Documentation/devicetree/bindings/ddr/lpddr3.txt   | 97 ++++++++++++++++++++++
>  2 files changed, 155 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
>  create mode 100644 Documentation/devicetree/bindings/ddr/lpddr3.txt
> 
> diff --git a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
> new file mode 100644
> index 0000000..3a2ef3a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
> @@ -0,0 +1,58 @@
> +* AC timing parameters of LPDDR3 memories for a given speed-bin.
> +
> +The structures are based on LPDDR2 and extended where needed.
> +
> +Required properties:
> +- compatible : Should be "jedec,lpddr3-timings"
> +- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
> +- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
> +
> +Optional properties:
> +
> +The following properties represent AC timing parameters from the memory
> +data-sheet of the device for a given speed-bin. All these properties are
> +of type <u32> and the default unit is ps (pico seconds).
> +- tRFC
> +- tRRD
> +- tRPab
> +- tRPpb
> +- tRCD
> +- tRC
> +- tRAS
> +- tWTR
> +- tWR
> +- tRTP
> +- tW2W-C2C
> +- tR2R-C2C
> +- tFAW
> +- tXSR
> +- tXP
> +- tCKE
> +- tCKESR
> +- tMRD
> +
> +Example:
> +
> +timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {

Now the unit-address should be @800000000

With that and the other example fixed,

Reviewed-by: Rob Herring <robh@kernel.org>

> +	compatible	= "jedec,lpddr3-timings";
> +	reg		= <800000000>; /* workaround: it shows max-freq */
> +	min-freq	= <100000000>;
Lukasz Luba May 8, 2019, 8:37 a.m. UTC | #2 
On 5/7/19 7:00 PM, Rob Herring wrote:
> On Mon, May 06, 2019 at 05:11:53PM +0200, Lukasz Luba wrote:
>> Specifies the AC timing parameters of the LPDDR3 memory device.
>>
>> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
>> ---
>>   .../devicetree/bindings/ddr/lpddr3-timings.txt     | 58 +++++++++++++
>>   Documentation/devicetree/bindings/ddr/lpddr3.txt   | 97 ++++++++++++++++++++++
>>   2 files changed, 155 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
>>   create mode 100644 Documentation/devicetree/bindings/ddr/lpddr3.txt
>>
>> diff --git a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
>> new file mode 100644
>> index 0000000..3a2ef3a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
>> @@ -0,0 +1,58 @@
>> +* AC timing parameters of LPDDR3 memories for a given speed-bin.
>> +
>> +The structures are based on LPDDR2 and extended where needed.
>> +
>> +Required properties:
>> +- compatible : Should be "jedec,lpddr3-timings"
>> +- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
>> +- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
>> +
>> +Optional properties:
>> +
>> +The following properties represent AC timing parameters from the memory
>> +data-sheet of the device for a given speed-bin. All these properties are
>> +of type <u32> and the default unit is ps (pico seconds).
>> +- tRFC
>> +- tRRD
>> +- tRPab
>> +- tRPpb
>> +- tRCD
>> +- tRC
>> +- tRAS
>> +- tWTR
>> +- tWR
>> +- tRTP
>> +- tW2W-C2C
>> +- tR2R-C2C
>> +- tFAW
>> +- tXSR
>> +- tXP
>> +- tCKE
>> +- tCKESR
>> +- tMRD
>> +
>> +Example:
>> +
>> +timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {
> 
> Now the unit-address should be @800000000
Added @800000000 to the both files.
> 
> With that and the other example fixed,
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
Thank you.

Regards,
Lukasz
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
new file mode 100644
index 0000000..3a2ef3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
@@ -0,0 +1,58 @@ 
+* AC timing parameters of LPDDR3 memories for a given speed-bin.
+
+The structures are based on LPDDR2 and extended where needed.
+
+Required properties:
+- compatible : Should be "jedec,lpddr3-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
+
+Optional properties:
+
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds).
+- tRFC
+- tRRD
+- tRPab
+- tRPpb
+- tRCD
+- tRC
+- tRAS
+- tWTR
+- tWR
+- tRTP
+- tW2W-C2C
+- tR2R-C2C
+- tFAW
+- tXSR
+- tXP
+- tCKE
+- tCKESR
+- tMRD
+
+Example:
+
+timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {
+	compatible	= "jedec,lpddr3-timings";
+	reg		= <800000000>; /* workaround: it shows max-freq */
+	min-freq	= <100000000>;
+	tRFC		= <65000>;
+	tRRD		= <6000>;
+	tRPab		= <12000>;
+	tRPpb		= <12000>;
+	tRCD		= <10000>;
+	tRC		= <33750>;
+	tRAS		= <23000>;
+	tWTR		= <3750>;
+	tWR		= <7500>;
+	tRTP		= <3750>;
+	tW2W-C2C	= <0>;
+	tR2R-C2C	= <0>;
+	tFAW		= <25000>;
+	tXSR		= <70000>;
+	tXP		= <3750>;
+	tCKE		= <3750>;
+	tCKESR		= <3750>;
+	tMRD		= <7000>;
+};
diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt
new file mode 100644
index 0000000..0dc86a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt
@@ -0,0 +1,97 @@ 
+* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
+
+Required properties:
+- compatible : Should be  - "jedec,lpddr3"
+- density  : <u32> representing density in Mb (Mega bits)
+- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
+- #address-cells: Must be set to 1
+- #size-cells: Must be set to 0
+
+Optional properties:
+
+The following optional properties represent the minimum value of some AC
+timing parameters of the DDR device in terms of number of clock cycles.
+These values shall be obtained from the device data-sheet.
+- tRFC-min-tck
+- tRRD-min-tck
+- tRPab-min-tck
+- tRPpb-min-tck
+- tRCD-min-tck
+- tRC-min-tck
+- tRAS-min-tck
+- tWTR-min-tck
+- tWR-min-tck
+- tRTP-min-tck
+- tW2W-C2C-min-tck
+- tR2R-C2C-min-tck
+- tWL-min-tck
+- tDQSCK-min-tck
+- tRL-min-tck
+- tFAW-min-tck
+- tXSR-min-tck
+- tXP-min-tck
+- tCKE-min-tck
+- tCKESR-min-tck
+- tMRD-min-tck
+
+Child nodes:
+- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
+  "lpddr3-timings" provides AC timing parameters of the device for
+  a given speed-bin. Please see Documentation/devicetree/
+  bindings/ddr/lpddr3-timings.txt for more information on "lpddr3-timings"
+
+Example:
+
+samsung_K3QF2F20DB: lpddr3 {
+	compatible	= "Samsung,K3QF2F20DB", "jedec,lpddr3";
+	density		= <16384>;
+	io-width	= <32>;
+	#address-cells	= <1>;
+	#size-cells	= <0>;
+
+	tRFC-min-tck		= <17>;
+	tRRD-min-tck		= <2>;
+	tRPab-min-tck		= <2>;
+	tRPpb-min-tck		= <2>;
+	tRCD-min-tck		= <3>;
+	tRC-min-tck		= <6>;
+	tRAS-min-tck		= <5>;
+	tWTR-min-tck		= <2>;
+	tWR-min-tck		= <7>;
+	tRTP-min-tck		= <2>;
+	tW2W-C2C-min-tck	= <0>;
+	tR2R-C2C-min-tck	= <0>;
+	tWL-min-tck		= <8>;
+	tDQSCK-min-tck		= <5>;
+	tRL-min-tck		= <14>;
+	tFAW-min-tck		= <5>;
+	tXSR-min-tck		= <12>;
+	tXP-min-tck		= <2>;
+	tCKE-min-tck		= <2>;
+	tCKESR-min-tck		= <2>;
+	tMRD-min-tck		= <5>;
+
+	timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {
+		compatible	= "jedec,lpddr3-timings";
+		reg		= <800000000>; /* workaround: it shows max-freq */
+		min-freq	= <100000000>;
+		tRFC		= <65000>;
+		tRRD		= <6000>;
+		tRPab		= <12000>;
+		tRPpb		= <12000>;
+		tRCD		= <10000>;
+		tRC		= <33750>;
+		tRAS		= <23000>;
+		tWTR		= <3750>;
+		tWR		= <7500>;
+		tRTP		= <3750>;
+		tW2W-C2C	= <0>;
+		tR2R-C2C	= <0>;
+		tFAW		= <25000>;
+		tXSR		= <70000>;
+		tXP		= <3750>;
+		tCKE		= <3750>;
+		tCKESR		= <3750>;
+		tMRD		= <7000>;
+	};
+}