@@ -30,6 +30,15 @@ properties:
$nodename:
pattern: "^dsi(@.*)?$"
+ clock-master:
+ type: boolean
+ description:
+ Should be enabled if the host is being used in conjunction with
+ another DSI host to drive the same peripheral. Hardware supporting
+ such a configuration generally requires the data on both the busses
+ to be driven by the same clock. Only the DSI host instance
+ controlling this clock should contain this property.
+
"#address-cells":
const: 1
@@ -52,15 +61,6 @@ patternProperties:
case the reg property can take multiple entries, one for each virtual
channel that the peripheral responds to.
- clock-master:
- type: boolean
- description:
- Should be enabled if the host is being used in conjunction with
- another DSI host to drive the same peripheral. Hardware supporting
- such a configuration generally requires the data on both the busses
- to be driven by the same clock. Only the DSI host instance
- controlling this clock should contain this property.
-
enforce-video-mode:
type: boolean
description:
The clock-master property is used for the controller and not in the panel, so move it there. Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- .../bindings/display/dsi-controller.yaml | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) -- 2.20.1