@@ -81,7 +81,7 @@ static void s3c_irq_mask(struct irq_data *data)
mask |= (1UL << data->hwirq);
__raw_writel(mask, intc->reg_mask);
- if (parent_intc && irq_data->parent_irq) {
+ if (parent_intc) {
parent_data = &parent_intc->irqs[irq_data->parent_irq];
/* check to see if we need to mask the parent IRQ */
@@ -105,7 +105,7 @@ static void s3c_irq_unmask(struct irq_data *data)
mask &= ~(1UL << data->hwirq);
__raw_writel(mask, intc->reg_mask);
- if (parent_intc && irq_data->parent_irq) {
+ if (parent_intc) {
irqno = irq_find_mapping(parent_intc->domain,
irq_data->parent_irq);
s3c_irq_unmask(irq_get_irq_data(irqno));
@@ -327,6 +327,8 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
/* attach controller pointer to irq_data */
irq_data->intc = intc;
+ parent_intc = intc->parent;
+
/* set handler and flags */
switch (irq_data->type) {
case S3C_IRQTYPE_NONE:
@@ -335,7 +337,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
/* On the S3C2412, the EINT0to3 have a parent irq
* but need the s3c_irq_eint0t4 chip
*/
- if (irq_data->parent_irq && (!soc_is_s3c2412() || hw >= 4))
+ if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
irq_set_chip_and_handler(virq, &s3c_irqext_chip,
handle_edge_irq);
else
@@ -343,8 +345,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
handle_edge_irq);
break;
case S3C_IRQTYPE_EDGE:
- if (irq_data->parent_irq ||
- intc->reg_pending == S3C2416_SRCPND2)
+ if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
handle_edge_irq);
else
@@ -352,7 +353,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
handle_edge_irq);
break;
case S3C_IRQTYPE_LEVEL:
- if (irq_data->parent_irq)
+ if (parent_intc)
irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
handle_level_irq);
else
@@ -365,14 +366,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
}
set_irq_flags(virq, IRQF_VALID);
- if (irq_data->parent_irq) {
- parent_intc = intc->parent;
- if (!parent_intc) {
- pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
- hw);
- goto err;
- }
-
+ if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
if (irq_data->parent_irq > 31) {
pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
irq_data->parent_irq);
The current parent_irq check checks for a value != 0. This does of course not work when the parent irq sits in the bit 0 of the parent register. This only affects the eint0 interrupt of the s3c2412. To fix this behaviour, check for the presence of a parent_intc in the structure. In an s3c24xx interrupt controller either all interrupts have parent interrupts or none have, so if a parent controller is available the parent_irq value always points to a parent_irq. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/mach-s3c24xx/irq.c | 22 ++++++++-------------- 1 files changed, 8 insertions(+), 14 deletions(-)