diff mbox

[v9,10/17] phy: Add driver for rockchip Display Port PHY

Message ID 20151105234534.GA77825@google.com (mailing list archive)
State New, archived
Headers show

Commit Message

Brian Norris Nov. 5, 2015, 11:45 p.m. UTC
Hi,

A few updates:

On Tue, Nov 03, 2015 at 05:13:48PM -0800, Brian Norris wrote:
> On Wed, Nov 04, 2015 at 08:48:38AM +0800, Yakir Yang wrote:
> > On 11/03/2015 12:38 PM, Brian Norris wrote:
> > >On Thu, Oct 29, 2015 at 09:58:38AM +0800, Yakir Yang wrote:
> > >(FYI, I came across this by inspection when comparing Heiko's
> > >'somewhat-stable' branch [1] with this series. The former brings up eDP
> > >fine on veyron-jaq, whereas this one doesn't yet, even with the above
> > >change. Still debugging the issue.)

Some time after the above comment, I managed to kill the panel on my
Jaq :( I think the wiring around the hinge was a bit flaky, and it
finally went out for good.

> > Hmm... I'm not sure whether your eDP screen have the hotplug signal, so I
> 
> I believe hotplug is hooked up but...
> 
> > think you can try to add "analogix,force-hpd" flag into
> > rk3288-veyron-jaq.dts
> > 
> > &edp {
> >     analogix,need-force-hpd;
> > }
> 
> ...already tried, just in case. No luck.

However, now when testing a different Jaq device, now this series +
Heiko's DTS updates + the "analogix,force-hpd" (i.e., [1]) works fine,
modulo a few log warnings, some of which are probably expected (for
instance, I believe the EDID is known not-so-helpful). Snippets:

[    3.170176] rockchip-dp ff970000.dp: AUX CH command reply failed!
[    3.178058] rockchip-dp ff970000.dp: AUX CH command reply failed!
[    3.184166] rockchip-dp ff970000.dp: unable to handle edid

and later:

[    3.953300] rockchip-dp ff970000.dp: EDID data does not include any extensions.
[    3.966731] rockchip-dp ff970000.dp: EDID data does not include any extensions.
[    3.979409] rockchip-dp ff970000.dp: EDID data does not include any extensions.
[    3.998730] rockchip-dp ff970000.dp: Link Training Clock Recovery success
[    4.007046] rockchip-dp ff970000.dp: Link Training success!
[    4.115040] rockchip-dp ff970000.dp: Timeout of video streamclk ok
[    4.121211] rockchip-dp ff970000.dp: unable to config video
[    4.127616] rockchip-dp ff970000.dp: EDID data does not include any extensions.


So, I'll chalk that earlier failure up to a hardware failure (or
possibly a still yet-undiagnosed hardware difference; my new Jaq has
some small differences from the previous unit).

Also, it's still not real clear why HPD isn't working upstream (and we
have to use the "force-hpd" property), when it appears to work on our
downstream Chrome OS tree.

Finally, I'll leave you with some small bits I've noticed from exploring
this issue on Jaq:

 * The Chrome OS driver for this IP has a much longer timeout in (the
   equivalent of) analogix_dp_detect_hpd; it polls in 10-20 ms intervals
   (rather than 10-11 us) and takes something around 60 to 120 ms to
   notice the panel.
 * AFAICT, the Chrome OS driver never actually used the HPD interrupt;
   it was only polling the HPD status bit. So I can't claim that the
   functionality that Yakir is supporting here has ever been tested on
   these platforms. (Now, I'm not sure this is extremely important,
   since we still can fall back to polled status checks; see
   drm_kms_helper_poll_init().)

That's all I've got for now.

Regards,
Brian

[1] https://github.com/mmind/linux-rockchip/commits/tmp/analogixdp-veyron

plus this diff:

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Yakir Yang Nov. 17, 2015, 12:58 p.m. UTC | #1
Hi Brian,

Thank you for debugging, and fell sorry for the delay reply

On 11/06/2015 07:45 AM, Brian Norris wrote:
> Hi,
>
> A few updates:
>
> On Tue, Nov 03, 2015 at 05:13:48PM -0800, Brian Norris wrote:
>> On Wed, Nov 04, 2015 at 08:48:38AM +0800, Yakir Yang wrote:
>>> On 11/03/2015 12:38 PM, Brian Norris wrote:
>>>> On Thu, Oct 29, 2015 at 09:58:38AM +0800, Yakir Yang wrote:
>>>> (FYI, I came across this by inspection when comparing Heiko's
>>>> 'somewhat-stable' branch [1] with this series. The former brings up eDP
>>>> fine on veyron-jaq, whereas this one doesn't yet, even with the above
>>>> change. Still debugging the issue.)
> Some time after the above comment, I managed to kill the panel on my
> Jaq :( I think the wiring around the hinge was a bit flaky, and it
> finally went out for good.
>
>>> Hmm... I'm not sure whether your eDP screen have the hotplug signal, so I
>> I believe hotplug is hooked up but...
>>
>>> think you can try to add "analogix,force-hpd" flag into
>>> rk3288-veyron-jaq.dts
>>>
>>> &edp {
>>>      analogix,need-force-hpd;
>>> }
>> ...already tried, just in case. No luck.
> However, now when testing a different Jaq device, now this series +
> Heiko's DTS updates + the "analogix,force-hpd" (i.e., [1]) works fine,
> modulo a few log warnings, some of which are probably expected (for
> instance, I believe the EDID is known not-so-helpful). Snippets:
>
> [    3.170176] rockchip-dp ff970000.dp: AUX CH command reply failed!
> [    3.178058] rockchip-dp ff970000.dp: AUX CH command reply failed!
> [    3.184166] rockchip-dp ff970000.dp: unable to handle edid
>
> and later:
>
> [    3.953300] rockchip-dp ff970000.dp: EDID data does not include any extensions.
> [    3.966731] rockchip-dp ff970000.dp: EDID data does not include any extensions.
> [    3.979409] rockchip-dp ff970000.dp: EDID data does not include any extensions.
> [    3.998730] rockchip-dp ff970000.dp: Link Training Clock Recovery success
> [    4.007046] rockchip-dp ff970000.dp: Link Training success!
> [    4.115040] rockchip-dp ff970000.dp: Timeout of video streamclk ok
> [    4.121211] rockchip-dp ff970000.dp: unable to config video
> [    4.127616] rockchip-dp ff970000.dp: EDID data does not include any extensions.
>
>
> So, I'll chalk that earlier failure up to a hardware failure (or
> possibly a still yet-undiagnosed hardware difference; my new Jaq has
> some small differences from the previous unit).

Yeah, I have saw this failed on some chromebook too, but finally it transmit
successfully, so I guess this maybe caused by hardware different.

>
> Also, it's still not real clear why HPD isn't working upstream (and we
> have to use the "force-hpd" property), when it appears to work on our
> downstream Chrome OS tree.

I have tested that driver do receive the hpd interrupt when i 
plugged/unplugged the
eDP screen, and at that time driver would read the HPD connected status 
rightly.

But I haven't fingered out why driver couldn't get the right HPD status 
in the early time,
need debug more...

> Finally, I'll leave you with some small bits I've noticed from exploring
> this issue on Jaq:
>
>   * The Chrome OS driver for this IP has a much longer timeout in (the
>     equivalent of) analogix_dp_detect_hpd; it polls in 10-20 ms intervals
>     (rather than 10-11 us) and takes something around 60 to 120 ms to
>     notice the panel.

Thanks, I have noticed it too, also I try to expand the hotplug timeout, 
but Jingoo
suggested not to do that, cause it would bring external delay on Exynos 
platform.

Besides from what Heiko reply, expand this delay time wouldn't give any help
on those Jaq no display case, delay the panel power up time would be the 
right
way to fix that, so maybe no need to expand the hotpulg timeout.

- Thanks
>   * AFAICT, the Chrome OS driver never actually used the HPD interrupt;
>     it was only polling the HPD status bit. So I can't claim that the
>     functionality that Yakir is supporting here has ever been tested on
>     these platforms. (Now, I'm not sure this is extremely important,
>     since we still can fall back to polled status checks; see
>     drm_kms_helper_poll_init().)
> That's all I've got for now.
>
> Regards,
> Brian
>
> [1] https://github.com/mmind/linux-rockchip/commits/tmp/analogixdp-veyron
>
> plus this diff:
>
> diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> index 5c97e3153526..e77ae4c5531e 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> @@ -88,6 +88,18 @@
>   	};
>   };
>   
> +&backlight {
> +	power-supply = <&backlight_regulator>;
> +};
> +
> +&panel {
> +	power-supply = <&panel_regulator>;
> +};
> +
> +&edp {
> +	analogix,need-force-hpd;
> +};
> +
>   &rk808 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
> index c82c22f3d0e1..994189f49db5 100644
> --- a/drivers/phy/phy-rockchip-dp.c
> +++ b/drivers/phy/phy-rockchip-dp.c
> @@ -22,7 +22,7 @@
>   
>   #define GRF_SOC_CON12                           0x0274
>   
> -#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK   BIT(4)
> +#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK   BIT(20)
>   #define GRF_EDP_REF_CLK_SEL_INTER               BIT(4)
>   
>   #define GRF_EDP_PHY_SIDDQ_HIWORD_MASK           BIT(21)
>
>
>


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index 5c97e3153526..e77ae4c5531e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -88,6 +88,18 @@ 
 	};
 };
 
+&backlight {
+	power-supply = <&backlight_regulator>;
+};
+
+&panel {
+	power-supply = <&panel_regulator>;
+};
+
+&edp {
+	analogix,need-force-hpd;
+};
+
 &rk808 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
index c82c22f3d0e1..994189f49db5 100644
--- a/drivers/phy/phy-rockchip-dp.c
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -22,7 +22,7 @@ 
 
 #define GRF_SOC_CON12                           0x0274
 
-#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK   BIT(4)
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK   BIT(20)
 #define GRF_EDP_REF_CLK_SEL_INTER               BIT(4)
 
 #define GRF_EDP_PHY_SIDDQ_HIWORD_MASK           BIT(21)