| Message ID | 20161230041421.24448-5-andi.shyti@samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
Hi Andi, Looks good to me. I tested these patches for booting on TM2 board. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Regards, Chanwoo Choi On 2016년 12월 30일 13:14, Andi Shyti wrote: > Change the PIN() macro definition so that it can use the macros > from pinctrl/samsung.h header file. > > Signed-off-by: Andi Shyti <andi.shyti@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 25 +- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 254 ++++++++++----------- > 2 files changed, 133 insertions(+), 146 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > index 2af854b11644..d49879bd34bb 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > @@ -14,25 +14,12 @@ > > #include <dt-bindings/pinctrl/samsung.h> > > -#define PIN_PULL_NONE 0 > -#define PIN_PULL_DOWN 1 > -#define PIN_PULL_UP 3 > - > -#define PIN_DRV_LV1 0 > -#define PIN_DRV_LV2 2 > -#define PIN_DRV_LV3 1 > -#define PIN_DRV_LV4 3 > - > -#define PIN_IN 0 > -#define PIN_OUT 1 > -#define PIN_FUNC1 2 > - > -#define PIN(_func, _pin, _pull, _drv) \ > - _pin { \ > - samsung,pins = #_pin; \ > - samsung,pin-function = <PIN_ ##_func>; \ > - samsung,pin-pud = <PIN_PULL_ ##_pull>; \ > - samsung,pin-drv = <PIN_DRV_ ##_drv>; \ > +#define PIN(_func, _pin, _pull, _drv) \ > + _pin { \ > + samsung,pins = #_pin; \ > + samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>; \ > + samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \ > + samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>; \ > } > > &pinctrl_alive { > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > index f21bdc2ff834..66c4d5959881 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > @@ -742,77 +742,77 @@ > pinctrl-0 = <&initial_alive>; > > initial_alive: initial-state { > - PIN(IN, gpa0-0, DOWN, LV1); > - PIN(IN, gpa0-1, NONE, LV1); > - PIN(IN, gpa0-2, DOWN, LV1); > - PIN(IN, gpa0-3, NONE, LV1); > - PIN(IN, gpa0-4, NONE, LV1); > - PIN(IN, gpa0-5, DOWN, LV1); > - PIN(IN, gpa0-6, NONE, LV1); > - PIN(IN, gpa0-7, NONE, LV1); > - > - PIN(IN, gpa1-0, UP, LV1); > - PIN(IN, gpa1-1, NONE, LV1); > - PIN(IN, gpa1-2, NONE, LV1); > - PIN(IN, gpa1-3, DOWN, LV1); > - PIN(IN, gpa1-4, DOWN, LV1); > - PIN(IN, gpa1-5, NONE, LV1); > - PIN(IN, gpa1-6, NONE, LV1); > - PIN(IN, gpa1-7, NONE, LV1); > - > - PIN(IN, gpa2-0, NONE, LV1); > - PIN(IN, gpa2-1, NONE, LV1); > - PIN(IN, gpa2-2, NONE, LV1); > - PIN(IN, gpa2-3, DOWN, LV1); > - PIN(IN, gpa2-4, NONE, LV1); > - PIN(IN, gpa2-5, DOWN, LV1); > - PIN(IN, gpa2-6, DOWN, LV1); > - PIN(IN, gpa2-7, NONE, LV1); > - > - PIN(IN, gpa3-0, DOWN, LV1); > - PIN(IN, gpa3-1, DOWN, LV1); > - PIN(IN, gpa3-2, NONE, LV1); > - PIN(IN, gpa3-3, DOWN, LV1); > - PIN(IN, gpa3-4, NONE, LV1); > - PIN(IN, gpa3-5, DOWN, LV1); > - PIN(IN, gpa3-6, DOWN, LV1); > - PIN(IN, gpa3-7, DOWN, LV1); > - > - PIN(IN, gpf1-0, NONE, LV1); > - PIN(IN, gpf1-1, NONE, LV1); > - PIN(IN, gpf1-2, DOWN, LV1); > - PIN(IN, gpf1-4, UP, LV1); > - PIN(OUT, gpf1-5, NONE, LV1); > - PIN(IN, gpf1-6, DOWN, LV1); > - PIN(IN, gpf1-7, DOWN, LV1); > - > - PIN(IN, gpf2-0, DOWN, LV1); > - PIN(IN, gpf2-1, DOWN, LV1); > - PIN(IN, gpf2-2, DOWN, LV1); > - PIN(IN, gpf2-3, DOWN, LV1); > - > - PIN(IN, gpf3-0, DOWN, LV1); > - PIN(IN, gpf3-1, DOWN, LV1); > - PIN(IN, gpf3-2, NONE, LV1); > - PIN(IN, gpf3-3, DOWN, LV1); > - > - PIN(IN, gpf4-0, DOWN, LV1); > - PIN(IN, gpf4-1, DOWN, LV1); > - PIN(IN, gpf4-2, DOWN, LV1); > - PIN(IN, gpf4-3, DOWN, LV1); > - PIN(IN, gpf4-4, DOWN, LV1); > - PIN(IN, gpf4-5, DOWN, LV1); > - PIN(IN, gpf4-6, DOWN, LV1); > - PIN(IN, gpf4-7, DOWN, LV1); > - > - PIN(IN, gpf5-0, DOWN, LV1); > - PIN(IN, gpf5-1, DOWN, LV1); > - PIN(IN, gpf5-2, DOWN, LV1); > - PIN(IN, gpf5-3, DOWN, LV1); > - PIN(OUT, gpf5-4, NONE, LV1); > - PIN(IN, gpf5-5, DOWN, LV1); > - PIN(IN, gpf5-6, DOWN, LV1); > - PIN(IN, gpf5-7, DOWN, LV1); > + PIN(INPUT, gpa0-0, DOWN, FAST_SR1); > + PIN(INPUT, gpa0-1, NONE, FAST_SR1); > + PIN(INPUT, gpa0-2, DOWN, FAST_SR1); > + PIN(INPUT, gpa0-3, NONE, FAST_SR1); > + PIN(INPUT, gpa0-4, NONE, FAST_SR1); > + PIN(INPUT, gpa0-5, DOWN, FAST_SR1); > + PIN(INPUT, gpa0-6, NONE, FAST_SR1); > + PIN(INPUT, gpa0-7, NONE, FAST_SR1); > + > + PIN(INPUT, gpa1-0, UP, FAST_SR1); > + PIN(INPUT, gpa1-1, NONE, FAST_SR1); > + PIN(INPUT, gpa1-2, NONE, FAST_SR1); > + PIN(INPUT, gpa1-3, DOWN, FAST_SR1); > + PIN(INPUT, gpa1-4, DOWN, FAST_SR1); > + PIN(INPUT, gpa1-5, NONE, FAST_SR1); > + PIN(INPUT, gpa1-6, NONE, FAST_SR1); > + PIN(INPUT, gpa1-7, NONE, FAST_SR1); > + > + PIN(INPUT, gpa2-0, NONE, FAST_SR1); > + PIN(INPUT, gpa2-1, NONE, FAST_SR1); > + PIN(INPUT, gpa2-2, NONE, FAST_SR1); > + PIN(INPUT, gpa2-3, DOWN, FAST_SR1); > + PIN(INPUT, gpa2-4, NONE, FAST_SR1); > + PIN(INPUT, gpa2-5, DOWN, FAST_SR1); > + PIN(INPUT, gpa2-6, DOWN, FAST_SR1); > + PIN(INPUT, gpa2-7, NONE, FAST_SR1); > + > + PIN(INPUT, gpa3-0, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-1, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-2, NONE, FAST_SR1); > + PIN(INPUT, gpa3-3, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-4, NONE, FAST_SR1); > + PIN(INPUT, gpa3-5, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-6, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-7, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf1-0, NONE, FAST_SR1); > + PIN(INPUT, gpf1-1, NONE, FAST_SR1); > + PIN(INPUT, gpf1-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf1-4, UP, FAST_SR1); > + PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); > + PIN(INPUT, gpf1-6, DOWN, FAST_SR1); > + PIN(INPUT, gpf1-7, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf2-0, DOWN, FAST_SR1); > + PIN(INPUT, gpf2-1, DOWN, FAST_SR1); > + PIN(INPUT, gpf2-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf2-3, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf3-0, DOWN, FAST_SR1); > + PIN(INPUT, gpf3-1, DOWN, FAST_SR1); > + PIN(INPUT, gpf3-2, NONE, FAST_SR1); > + PIN(INPUT, gpf3-3, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf4-0, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-1, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-3, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-4, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-5, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-6, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-7, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf5-0, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-1, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-3, DOWN, FAST_SR1); > + PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); > + PIN(INPUT, gpf5-5, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-6, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-7, DOWN, FAST_SR1); > }; > > te_irq: te_irq { > @@ -826,8 +826,8 @@ > pinctrl-0 = <&initial_cpif>; > > initial_cpif: initial-state { > - PIN(IN, gpv6-0, DOWN, LV1); > - PIN(IN, gpv6-1, DOWN, LV1); > + PIN(INPUT, gpv6-0, DOWN, FAST_SR1); > + PIN(INPUT, gpv6-1, DOWN, FAST_SR1); > }; > }; > > @@ -836,9 +836,9 @@ > pinctrl-0 = <&initial_ese>; > > initial_ese: initial-state { > - PIN(IN, gpj2-0, DOWN, LV1); > - PIN(IN, gpj2-1, DOWN, LV1); > - PIN(IN, gpj2-2, DOWN, LV1); > + PIN(INPUT, gpj2-0, DOWN, FAST_SR1); > + PIN(INPUT, gpj2-1, DOWN, FAST_SR1); > + PIN(INPUT, gpj2-2, DOWN, FAST_SR1); > }; > }; > > @@ -847,11 +847,11 @@ > pinctrl-0 = <&initial_fsys>; > > initial_fsys: initial-state { > - PIN(IN, gpr3-0, NONE, LV1); > - PIN(IN, gpr3-1, DOWN, LV1); > - PIN(IN, gpr3-2, DOWN, LV1); > - PIN(IN, gpr3-3, DOWN, LV1); > - PIN(IN, gpr3-7, NONE, LV1); > + PIN(INPUT, gpr3-0, NONE, FAST_SR1); > + PIN(INPUT, gpr3-1, DOWN, FAST_SR1); > + PIN(INPUT, gpr3-2, DOWN, FAST_SR1); > + PIN(INPUT, gpr3-3, DOWN, FAST_SR1); > + PIN(INPUT, gpr3-7, NONE, FAST_SR1); > }; > }; > > @@ -860,14 +860,14 @@ > pinctrl-0 = <&initial_imem>; > > initial_imem: initial-state { > - PIN(IN, gpf0-0, UP, LV1); > - PIN(IN, gpf0-1, UP, LV1); > - PIN(IN, gpf0-2, DOWN, LV1); > - PIN(IN, gpf0-3, UP, LV1); > - PIN(IN, gpf0-4, DOWN, LV1); > - PIN(IN, gpf0-5, NONE, LV1); > - PIN(IN, gpf0-6, DOWN, LV1); > - PIN(IN, gpf0-7, UP, LV1); > + PIN(INPUT, gpf0-0, UP, FAST_SR1); > + PIN(INPUT, gpf0-1, UP, FAST_SR1); > + PIN(INPUT, gpf0-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf0-3, UP, FAST_SR1); > + PIN(INPUT, gpf0-4, DOWN, FAST_SR1); > + PIN(INPUT, gpf0-5, NONE, FAST_SR1); > + PIN(INPUT, gpf0-6, DOWN, FAST_SR1); > + PIN(INPUT, gpf0-7, UP, FAST_SR1); > }; > }; > > @@ -876,7 +876,7 @@ > pinctrl-0 = <&initial_nfc>; > > initial_nfc: initial-state { > - PIN(IN, gpj0-2, DOWN, LV1); > + PIN(INPUT, gpj0-2, DOWN, FAST_SR1); > }; > }; > > @@ -885,54 +885,54 @@ > pinctrl-0 = <&initial_peric>; > > initial_peric: initial-state { > - PIN(IN, gpv7-0, DOWN, LV1); > - PIN(IN, gpv7-1, DOWN, LV1); > - PIN(IN, gpv7-2, NONE, LV1); > - PIN(IN, gpv7-3, DOWN, LV1); > - PIN(IN, gpv7-4, DOWN, LV1); > - PIN(IN, gpv7-5, DOWN, LV1); > + PIN(INPUT, gpv7-0, DOWN, FAST_SR1); > + PIN(INPUT, gpv7-1, DOWN, FAST_SR1); > + PIN(INPUT, gpv7-2, NONE, FAST_SR1); > + PIN(INPUT, gpv7-3, DOWN, FAST_SR1); > + PIN(INPUT, gpv7-4, DOWN, FAST_SR1); > + PIN(INPUT, gpv7-5, DOWN, FAST_SR1); > > - PIN(IN, gpb0-4, DOWN, LV1); > + PIN(INPUT, gpb0-4, DOWN, FAST_SR1); > > - PIN(IN, gpc0-2, DOWN, LV1); > - PIN(IN, gpc0-5, DOWN, LV1); > - PIN(IN, gpc0-7, DOWN, LV1); > + PIN(INPUT, gpc0-2, DOWN, FAST_SR1); > + PIN(INPUT, gpc0-5, DOWN, FAST_SR1); > + PIN(INPUT, gpc0-7, DOWN, FAST_SR1); > > - PIN(IN, gpc1-1, DOWN, LV1); > + PIN(INPUT, gpc1-1, DOWN, FAST_SR1); > > - PIN(IN, gpc3-4, NONE, LV1); > - PIN(IN, gpc3-5, NONE, LV1); > - PIN(IN, gpc3-6, NONE, LV1); > - PIN(IN, gpc3-7, NONE, LV1); > + PIN(INPUT, gpc3-4, NONE, FAST_SR1); > + PIN(INPUT, gpc3-5, NONE, FAST_SR1); > + PIN(INPUT, gpc3-6, NONE, FAST_SR1); > + PIN(INPUT, gpc3-7, NONE, FAST_SR1); > > - PIN(OUT, gpg0-0, NONE, LV1); > - PIN(FUNC1, gpg0-1, DOWN, LV1); > + PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); > + PIN(2, gpg0-1, DOWN, FAST_SR1); > > - PIN(IN, gpd2-5, DOWN, LV1); > + PIN(INPUT, gpd2-5, DOWN, FAST_SR1); > > - PIN(IN, gpd4-0, NONE, LV1); > - PIN(IN, gpd4-1, DOWN, LV1); > - PIN(IN, gpd4-2, DOWN, LV1); > - PIN(IN, gpd4-3, DOWN, LV1); > - PIN(IN, gpd4-4, DOWN, LV1); > + PIN(INPUT, gpd4-0, NONE, FAST_SR1); > + PIN(INPUT, gpd4-1, DOWN, FAST_SR1); > + PIN(INPUT, gpd4-2, DOWN, FAST_SR1); > + PIN(INPUT, gpd4-3, DOWN, FAST_SR1); > + PIN(INPUT, gpd4-4, DOWN, FAST_SR1); > > - PIN(IN, gpd6-3, DOWN, LV1); > + PIN(INPUT, gpd6-3, DOWN, FAST_SR1); > > - PIN(IN, gpd8-1, UP, LV1); > + PIN(INPUT, gpd8-1, UP, FAST_SR1); > > - PIN(IN, gpg1-0, DOWN, LV1); > - PIN(IN, gpg1-1, DOWN, LV1); > - PIN(IN, gpg1-2, DOWN, LV1); > - PIN(IN, gpg1-3, DOWN, LV1); > - PIN(IN, gpg1-4, DOWN, LV1); > + PIN(INPUT, gpg1-0, DOWN, FAST_SR1); > + PIN(INPUT, gpg1-1, DOWN, FAST_SR1); > + PIN(INPUT, gpg1-2, DOWN, FAST_SR1); > + PIN(INPUT, gpg1-3, DOWN, FAST_SR1); > + PIN(INPUT, gpg1-4, DOWN, FAST_SR1); > > - PIN(IN, gpg2-0, DOWN, LV1); > - PIN(IN, gpg2-1, DOWN, LV1); > + PIN(INPUT, gpg2-0, DOWN, FAST_SR1); > + PIN(INPUT, gpg2-1, DOWN, FAST_SR1); > > - PIN(IN, gpg3-0, DOWN, LV1); > - PIN(IN, gpg3-1, DOWN, LV1); > - PIN(IN, gpg3-5, DOWN, LV1); > - PIN(IN, gpg3-7, DOWN, LV1); > + PIN(INPUT, gpg3-0, DOWN, FAST_SR1); > + PIN(INPUT, gpg3-1, DOWN, FAST_SR1); > + PIN(INPUT, gpg3-5, DOWN, FAST_SR1); > + PIN(INPUT, gpg3-7, DOWN, FAST_SR1); > }; > }; > > @@ -941,7 +941,7 @@ > pinctrl-0 = <&initial_touch>; > > initial_touch: initial-state { > - PIN(IN, gpj1-2, DOWN, LV1); > + PIN(INPUT, gpj1-2, DOWN, FAST_SR1); > }; > }; > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Dec 30, 2016 at 01:14:21PM +0900, Andi Shyti wrote: > Change the PIN() macro definition so that it can use the macros > from pinctrl/samsung.h header file. > > Signed-off-by: Andi Shyti <andi.shyti@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 25 +- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 254 ++++++++++----------- > 2 files changed, 133 insertions(+), 146 deletions(-) > Thanks, applied (here and in 3/4 with fixed subject). Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi index 2af854b11644..d49879bd34bb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi @@ -14,25 +14,12 @@ #include <dt-bindings/pinctrl/samsung.h> -#define PIN_PULL_NONE 0 -#define PIN_PULL_DOWN 1 -#define PIN_PULL_UP 3 - -#define PIN_DRV_LV1 0 -#define PIN_DRV_LV2 2 -#define PIN_DRV_LV3 1 -#define PIN_DRV_LV4 3 - -#define PIN_IN 0 -#define PIN_OUT 1 -#define PIN_FUNC1 2 - -#define PIN(_func, _pin, _pull, _drv) \ - _pin { \ - samsung,pins = #_pin; \ - samsung,pin-function = <PIN_ ##_func>; \ - samsung,pin-pud = <PIN_PULL_ ##_pull>; \ - samsung,pin-drv = <PIN_DRV_ ##_drv>; \ +#define PIN(_func, _pin, _pull, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>; \ + samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \ + samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>; \ } &pinctrl_alive { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index f21bdc2ff834..66c4d5959881 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -742,77 +742,77 @@ pinctrl-0 = <&initial_alive>; initial_alive: initial-state { - PIN(IN, gpa0-0, DOWN, LV1); - PIN(IN, gpa0-1, NONE, LV1); - PIN(IN, gpa0-2, DOWN, LV1); - PIN(IN, gpa0-3, NONE, LV1); - PIN(IN, gpa0-4, NONE, LV1); - PIN(IN, gpa0-5, DOWN, LV1); - PIN(IN, gpa0-6, NONE, LV1); - PIN(IN, gpa0-7, NONE, LV1); - - PIN(IN, gpa1-0, UP, LV1); - PIN(IN, gpa1-1, NONE, LV1); - PIN(IN, gpa1-2, NONE, LV1); - PIN(IN, gpa1-3, DOWN, LV1); - PIN(IN, gpa1-4, DOWN, LV1); - PIN(IN, gpa1-5, NONE, LV1); - PIN(IN, gpa1-6, NONE, LV1); - PIN(IN, gpa1-7, NONE, LV1); - - PIN(IN, gpa2-0, NONE, LV1); - PIN(IN, gpa2-1, NONE, LV1); - PIN(IN, gpa2-2, NONE, LV1); - PIN(IN, gpa2-3, DOWN, LV1); - PIN(IN, gpa2-4, NONE, LV1); - PIN(IN, gpa2-5, DOWN, LV1); - PIN(IN, gpa2-6, DOWN, LV1); - PIN(IN, gpa2-7, NONE, LV1); - - PIN(IN, gpa3-0, DOWN, LV1); - PIN(IN, gpa3-1, DOWN, LV1); - PIN(IN, gpa3-2, NONE, LV1); - PIN(IN, gpa3-3, DOWN, LV1); - PIN(IN, gpa3-4, NONE, LV1); - PIN(IN, gpa3-5, DOWN, LV1); - PIN(IN, gpa3-6, DOWN, LV1); - PIN(IN, gpa3-7, DOWN, LV1); - - PIN(IN, gpf1-0, NONE, LV1); - PIN(IN, gpf1-1, NONE, LV1); - PIN(IN, gpf1-2, DOWN, LV1); - PIN(IN, gpf1-4, UP, LV1); - PIN(OUT, gpf1-5, NONE, LV1); - PIN(IN, gpf1-6, DOWN, LV1); - PIN(IN, gpf1-7, DOWN, LV1); - - PIN(IN, gpf2-0, DOWN, LV1); - PIN(IN, gpf2-1, DOWN, LV1); - PIN(IN, gpf2-2, DOWN, LV1); - PIN(IN, gpf2-3, DOWN, LV1); - - PIN(IN, gpf3-0, DOWN, LV1); - PIN(IN, gpf3-1, DOWN, LV1); - PIN(IN, gpf3-2, NONE, LV1); - PIN(IN, gpf3-3, DOWN, LV1); - - PIN(IN, gpf4-0, DOWN, LV1); - PIN(IN, gpf4-1, DOWN, LV1); - PIN(IN, gpf4-2, DOWN, LV1); - PIN(IN, gpf4-3, DOWN, LV1); - PIN(IN, gpf4-4, DOWN, LV1); - PIN(IN, gpf4-5, DOWN, LV1); - PIN(IN, gpf4-6, DOWN, LV1); - PIN(IN, gpf4-7, DOWN, LV1); - - PIN(IN, gpf5-0, DOWN, LV1); - PIN(IN, gpf5-1, DOWN, LV1); - PIN(IN, gpf5-2, DOWN, LV1); - PIN(IN, gpf5-3, DOWN, LV1); - PIN(OUT, gpf5-4, NONE, LV1); - PIN(IN, gpf5-5, DOWN, LV1); - PIN(IN, gpf5-6, DOWN, LV1); - PIN(IN, gpf5-7, DOWN, LV1); + PIN(INPUT, gpa0-0, DOWN, FAST_SR1); + PIN(INPUT, gpa0-1, NONE, FAST_SR1); + PIN(INPUT, gpa0-2, DOWN, FAST_SR1); + PIN(INPUT, gpa0-3, NONE, FAST_SR1); + PIN(INPUT, gpa0-4, NONE, FAST_SR1); + PIN(INPUT, gpa0-5, DOWN, FAST_SR1); + PIN(INPUT, gpa0-6, NONE, FAST_SR1); + PIN(INPUT, gpa0-7, NONE, FAST_SR1); + + PIN(INPUT, gpa1-0, UP, FAST_SR1); + PIN(INPUT, gpa1-1, NONE, FAST_SR1); + PIN(INPUT, gpa1-2, NONE, FAST_SR1); + PIN(INPUT, gpa1-3, DOWN, FAST_SR1); + PIN(INPUT, gpa1-4, DOWN, FAST_SR1); + PIN(INPUT, gpa1-5, NONE, FAST_SR1); + PIN(INPUT, gpa1-6, NONE, FAST_SR1); + PIN(INPUT, gpa1-7, NONE, FAST_SR1); + + PIN(INPUT, gpa2-0, NONE, FAST_SR1); + PIN(INPUT, gpa2-1, NONE, FAST_SR1); + PIN(INPUT, gpa2-2, NONE, FAST_SR1); + PIN(INPUT, gpa2-3, DOWN, FAST_SR1); + PIN(INPUT, gpa2-4, NONE, FAST_SR1); + PIN(INPUT, gpa2-5, DOWN, FAST_SR1); + PIN(INPUT, gpa2-6, DOWN, FAST_SR1); + PIN(INPUT, gpa2-7, NONE, FAST_SR1); + + PIN(INPUT, gpa3-0, DOWN, FAST_SR1); + PIN(INPUT, gpa3-1, DOWN, FAST_SR1); + PIN(INPUT, gpa3-2, NONE, FAST_SR1); + PIN(INPUT, gpa3-3, DOWN, FAST_SR1); + PIN(INPUT, gpa3-4, NONE, FAST_SR1); + PIN(INPUT, gpa3-5, DOWN, FAST_SR1); + PIN(INPUT, gpa3-6, DOWN, FAST_SR1); + PIN(INPUT, gpa3-7, DOWN, FAST_SR1); + + PIN(INPUT, gpf1-0, NONE, FAST_SR1); + PIN(INPUT, gpf1-1, NONE, FAST_SR1); + PIN(INPUT, gpf1-2, DOWN, FAST_SR1); + PIN(INPUT, gpf1-4, UP, FAST_SR1); + PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); + PIN(INPUT, gpf1-6, DOWN, FAST_SR1); + PIN(INPUT, gpf1-7, DOWN, FAST_SR1); + + PIN(INPUT, gpf2-0, DOWN, FAST_SR1); + PIN(INPUT, gpf2-1, DOWN, FAST_SR1); + PIN(INPUT, gpf2-2, DOWN, FAST_SR1); + PIN(INPUT, gpf2-3, DOWN, FAST_SR1); + + PIN(INPUT, gpf3-0, DOWN, FAST_SR1); + PIN(INPUT, gpf3-1, DOWN, FAST_SR1); + PIN(INPUT, gpf3-2, NONE, FAST_SR1); + PIN(INPUT, gpf3-3, DOWN, FAST_SR1); + + PIN(INPUT, gpf4-0, DOWN, FAST_SR1); + PIN(INPUT, gpf4-1, DOWN, FAST_SR1); + PIN(INPUT, gpf4-2, DOWN, FAST_SR1); + PIN(INPUT, gpf4-3, DOWN, FAST_SR1); + PIN(INPUT, gpf4-4, DOWN, FAST_SR1); + PIN(INPUT, gpf4-5, DOWN, FAST_SR1); + PIN(INPUT, gpf4-6, DOWN, FAST_SR1); + PIN(INPUT, gpf4-7, DOWN, FAST_SR1); + + PIN(INPUT, gpf5-0, DOWN, FAST_SR1); + PIN(INPUT, gpf5-1, DOWN, FAST_SR1); + PIN(INPUT, gpf5-2, DOWN, FAST_SR1); + PIN(INPUT, gpf5-3, DOWN, FAST_SR1); + PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); + PIN(INPUT, gpf5-5, DOWN, FAST_SR1); + PIN(INPUT, gpf5-6, DOWN, FAST_SR1); + PIN(INPUT, gpf5-7, DOWN, FAST_SR1); }; te_irq: te_irq { @@ -826,8 +826,8 @@ pinctrl-0 = <&initial_cpif>; initial_cpif: initial-state { - PIN(IN, gpv6-0, DOWN, LV1); - PIN(IN, gpv6-1, DOWN, LV1); + PIN(INPUT, gpv6-0, DOWN, FAST_SR1); + PIN(INPUT, gpv6-1, DOWN, FAST_SR1); }; }; @@ -836,9 +836,9 @@ pinctrl-0 = <&initial_ese>; initial_ese: initial-state { - PIN(IN, gpj2-0, DOWN, LV1); - PIN(IN, gpj2-1, DOWN, LV1); - PIN(IN, gpj2-2, DOWN, LV1); + PIN(INPUT, gpj2-0, DOWN, FAST_SR1); + PIN(INPUT, gpj2-1, DOWN, FAST_SR1); + PIN(INPUT, gpj2-2, DOWN, FAST_SR1); }; }; @@ -847,11 +847,11 @@ pinctrl-0 = <&initial_fsys>; initial_fsys: initial-state { - PIN(IN, gpr3-0, NONE, LV1); - PIN(IN, gpr3-1, DOWN, LV1); - PIN(IN, gpr3-2, DOWN, LV1); - PIN(IN, gpr3-3, DOWN, LV1); - PIN(IN, gpr3-7, NONE, LV1); + PIN(INPUT, gpr3-0, NONE, FAST_SR1); + PIN(INPUT, gpr3-1, DOWN, FAST_SR1); + PIN(INPUT, gpr3-2, DOWN, FAST_SR1); + PIN(INPUT, gpr3-3, DOWN, FAST_SR1); + PIN(INPUT, gpr3-7, NONE, FAST_SR1); }; }; @@ -860,14 +860,14 @@ pinctrl-0 = <&initial_imem>; initial_imem: initial-state { - PIN(IN, gpf0-0, UP, LV1); - PIN(IN, gpf0-1, UP, LV1); - PIN(IN, gpf0-2, DOWN, LV1); - PIN(IN, gpf0-3, UP, LV1); - PIN(IN, gpf0-4, DOWN, LV1); - PIN(IN, gpf0-5, NONE, LV1); - PIN(IN, gpf0-6, DOWN, LV1); - PIN(IN, gpf0-7, UP, LV1); + PIN(INPUT, gpf0-0, UP, FAST_SR1); + PIN(INPUT, gpf0-1, UP, FAST_SR1); + PIN(INPUT, gpf0-2, DOWN, FAST_SR1); + PIN(INPUT, gpf0-3, UP, FAST_SR1); + PIN(INPUT, gpf0-4, DOWN, FAST_SR1); + PIN(INPUT, gpf0-5, NONE, FAST_SR1); + PIN(INPUT, gpf0-6, DOWN, FAST_SR1); + PIN(INPUT, gpf0-7, UP, FAST_SR1); }; }; @@ -876,7 +876,7 @@ pinctrl-0 = <&initial_nfc>; initial_nfc: initial-state { - PIN(IN, gpj0-2, DOWN, LV1); + PIN(INPUT, gpj0-2, DOWN, FAST_SR1); }; }; @@ -885,54 +885,54 @@ pinctrl-0 = <&initial_peric>; initial_peric: initial-state { - PIN(IN, gpv7-0, DOWN, LV1); - PIN(IN, gpv7-1, DOWN, LV1); - PIN(IN, gpv7-2, NONE, LV1); - PIN(IN, gpv7-3, DOWN, LV1); - PIN(IN, gpv7-4, DOWN, LV1); - PIN(IN, gpv7-5, DOWN, LV1); + PIN(INPUT, gpv7-0, DOWN, FAST_SR1); + PIN(INPUT, gpv7-1, DOWN, FAST_SR1); + PIN(INPUT, gpv7-2, NONE, FAST_SR1); + PIN(INPUT, gpv7-3, DOWN, FAST_SR1); + PIN(INPUT, gpv7-4, DOWN, FAST_SR1); + PIN(INPUT, gpv7-5, DOWN, FAST_SR1); - PIN(IN, gpb0-4, DOWN, LV1); + PIN(INPUT, gpb0-4, DOWN, FAST_SR1); - PIN(IN, gpc0-2, DOWN, LV1); - PIN(IN, gpc0-5, DOWN, LV1); - PIN(IN, gpc0-7, DOWN, LV1); + PIN(INPUT, gpc0-2, DOWN, FAST_SR1); + PIN(INPUT, gpc0-5, DOWN, FAST_SR1); + PIN(INPUT, gpc0-7, DOWN, FAST_SR1); - PIN(IN, gpc1-1, DOWN, LV1); + PIN(INPUT, gpc1-1, DOWN, FAST_SR1); - PIN(IN, gpc3-4, NONE, LV1); - PIN(IN, gpc3-5, NONE, LV1); - PIN(IN, gpc3-6, NONE, LV1); - PIN(IN, gpc3-7, NONE, LV1); + PIN(INPUT, gpc3-4, NONE, FAST_SR1); + PIN(INPUT, gpc3-5, NONE, FAST_SR1); + PIN(INPUT, gpc3-6, NONE, FAST_SR1); + PIN(INPUT, gpc3-7, NONE, FAST_SR1); - PIN(OUT, gpg0-0, NONE, LV1); - PIN(FUNC1, gpg0-1, DOWN, LV1); + PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); + PIN(2, gpg0-1, DOWN, FAST_SR1); - PIN(IN, gpd2-5, DOWN, LV1); + PIN(INPUT, gpd2-5, DOWN, FAST_SR1); - PIN(IN, gpd4-0, NONE, LV1); - PIN(IN, gpd4-1, DOWN, LV1); - PIN(IN, gpd4-2, DOWN, LV1); - PIN(IN, gpd4-3, DOWN, LV1); - PIN(IN, gpd4-4, DOWN, LV1); + PIN(INPUT, gpd4-0, NONE, FAST_SR1); + PIN(INPUT, gpd4-1, DOWN, FAST_SR1); + PIN(INPUT, gpd4-2, DOWN, FAST_SR1); + PIN(INPUT, gpd4-3, DOWN, FAST_SR1); + PIN(INPUT, gpd4-4, DOWN, FAST_SR1); - PIN(IN, gpd6-3, DOWN, LV1); + PIN(INPUT, gpd6-3, DOWN, FAST_SR1); - PIN(IN, gpd8-1, UP, LV1); + PIN(INPUT, gpd8-1, UP, FAST_SR1); - PIN(IN, gpg1-0, DOWN, LV1); - PIN(IN, gpg1-1, DOWN, LV1); - PIN(IN, gpg1-2, DOWN, LV1); - PIN(IN, gpg1-3, DOWN, LV1); - PIN(IN, gpg1-4, DOWN, LV1); + PIN(INPUT, gpg1-0, DOWN, FAST_SR1); + PIN(INPUT, gpg1-1, DOWN, FAST_SR1); + PIN(INPUT, gpg1-2, DOWN, FAST_SR1); + PIN(INPUT, gpg1-3, DOWN, FAST_SR1); + PIN(INPUT, gpg1-4, DOWN, FAST_SR1); - PIN(IN, gpg2-0, DOWN, LV1); - PIN(IN, gpg2-1, DOWN, LV1); + PIN(INPUT, gpg2-0, DOWN, FAST_SR1); + PIN(INPUT, gpg2-1, DOWN, FAST_SR1); - PIN(IN, gpg3-0, DOWN, LV1); - PIN(IN, gpg3-1, DOWN, LV1); - PIN(IN, gpg3-5, DOWN, LV1); - PIN(IN, gpg3-7, DOWN, LV1); + PIN(INPUT, gpg3-0, DOWN, FAST_SR1); + PIN(INPUT, gpg3-1, DOWN, FAST_SR1); + PIN(INPUT, gpg3-5, DOWN, FAST_SR1); + PIN(INPUT, gpg3-7, DOWN, FAST_SR1); }; }; @@ -941,7 +941,7 @@ pinctrl-0 = <&initial_touch>; initial_touch: initial-state { - PIN(IN, gpj1-2, DOWN, LV1); + PIN(INPUT, gpj1-2, DOWN, FAST_SR1); }; };
Change the PIN() macro definition so that it can use the macros from pinctrl/samsung.h header file. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> --- arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 25 +- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 254 ++++++++++----------- 2 files changed, 133 insertions(+), 146 deletions(-)