diff mbox

[V3,2/4] phy: phy-exynos-pcie: Add support for Exynos PCIe phy

Message ID 20170213082613.19628-3-jh80.chung@samsung.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Jaehoon Chung Feb. 13, 2017, 8:26 a.m. UTC
This patch adds support for Generic PHY framework about Exynos SoCs.
Current Exynos PCIe driver doesn't use the PHY framework.
It's making a difficult to upstream the other Exynos variants because of
different PHY registers.

Move the codes relevant to PHY from Exnyos PCIe driver to PHY Exynos PCIe
driver.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
Changelog on V3:
- Remove the dependency abot PCI_EXYNOS
- Adds a depends on COMPILE_TEST
- Use the readl_poll_timeout() instead of while()
- Fixes const type
- Adds MODULE_DESCRIPTION()/LICENCSE()/AUTHOR()
- Changes commit message

Changelog on V2:
- Not include the codes relevant to pci-exynos.
- Remove the getting child node.

 drivers/phy/Kconfig           |   8 ++
 drivers/phy/Makefile          |   1 +
 drivers/phy/phy-exynos-pcie.c | 285 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 294 insertions(+)
 create mode 100644 drivers/phy/phy-exynos-pcie.c

Comments

Vivek Gautam Feb. 15, 2017, 5:24 a.m. UTC | #1
On 02/13/2017 01:56 PM, Jaehoon Chung wrote:
> This patch adds support for Generic PHY framework about Exynos SoCs.
> Current Exynos PCIe driver doesn't use the PHY framework.
> It's making a difficult to upstream the other Exynos variants because of
> different PHY registers.
>
> Move the codes relevant to PHY from Exnyos PCIe driver to PHY Exynos PCIe
> driver.
>
> Signed-off-by: Jaehoon Chung<jh80.chung@samsung.com>
> Acked-by: Krzysztof Kozlowski<krzk@kernel.org>
> Reviewed-by: Jingoo Han<jingoohan1@gmail.com>
> Reviewed-by: Pankaj Dubey<pankaj.dubey@samsung.com>
> ---
> Changelog on V3:
> - Remove the dependency abot PCI_EXYNOS
> - Adds a depends on COMPILE_TEST
> - Use the readl_poll_timeout() instead of while()
> - Fixes const type
> - Adds MODULE_DESCRIPTION()/LICENCSE()/AUTHOR()
> - Changes commit message
>
> Changelog on V2:
> - Not include the codes relevant to pci-exynos.
> - Remove the getting child node.
>
>   drivers/phy/Kconfig           |   8 ++
>   drivers/phy/Makefile          |   1 +
>   drivers/phy/phy-exynos-pcie.c | 285 ++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 294 insertions(+)
>   create mode 100644 drivers/phy/phy-exynos-pcie.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index e8eb7f2..8659f38 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -331,6 +331,14 @@ config PHY_EXYNOS5_USBDRD
>   	  This driver provides PHY interface for USB 3.0 DRD controller
>   	  present on Exynos5 SoC series.
>   
> +config PHY_EXYNOS_PCIE
> +	bool "Exynos PCIe PHY driver"
> +	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST

this should be other way round if your driver runs only with OF enabled.
           depends on OF && (ARCH_EXYNOS || COMPILE_TEST)

> +	select GENERIC_PHY
> +	help
> +	  Enable PCIe PHY support for Exynos SoC series.
> +	  This driver provides PHY interface for Exynos PCIe controller.
> +
>   config PHY_PISTACHIO_USB
>   	tristate "IMG Pistachio USB2.0 PHY driver"
>   	depends on MACH_PISTACHIO
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 65eb2f4..081aeb4 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2)	+= phy-exynos4x12-usb2.o
>   phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
>   phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
>   obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
> +obj-$(CONFIG_PHY_EXYNOS_PCIE)	+= phy-exynos-pcie.o
>   obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
>   obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
>   obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
> diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c
> new file mode 100644
> index 0000000..9ec1855
> --- /dev/null
> +++ b/drivers/phy/phy-exynos-pcie.c
> @@ -0,0 +1,285 @@
> +/*
> + * Samsung EXYNOS SoC series PCIe PHY driver
> + *
> + * Phy provider for PCIe controller on Exynos SoC series
> + *
> + * Copyright (C) 2016 Samsung Electronics Co., Ltd.

nit: copyright year.

> + * Jaehoon Chung<jh80.chung@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +
> +/* PCIe Purple registers */
> +#define PCIE_PHY_GLOBAL_RESET		0x000
> +#define PCIE_PHY_COMMON_RESET		0x004
> +#define PCIE_PHY_CMN_REG		0x008
> +#define PCIE_PHY_MAC_RESET		0x00c
> +#define PCIE_PHY_PLL_LOCKED		0x010
> +#define PCIE_PHY_TRSVREG_RESET		0x020
> +#define PCIE_PHY_TRSV_RESET		0x024
> +
> +/* PCIe PHY registers */
> +#define PCIE_PHY_IMPEDANCE		0x004
> +#define PCIE_PHY_PLL_DIV_0		0x008
> +#define PCIE_PHY_PLL_BIAS		0x00c
> +#define PCIE_PHY_DCC_FEEDBACK		0x014
> +#define PCIE_PHY_PLL_DIV_1		0x05c
> +#define PCIE_PHY_COMMON_POWER		0x064
> +#define PCIE_PHY_COMMON_PD_CMN		BIT(3)
> +#define PCIE_PHY_TRSV0_EMP_LVL		0x084
> +#define PCIE_PHY_TRSV0_DRV_LVL		0x088
> +#define PCIE_PHY_TRSV0_RXCDR		0x0ac
> +#define PCIE_PHY_TRSV0_POWER		0x0c4
> +#define PCIE_PHY_TRSV0_PD_TSV		BIT(7)
> +#define PCIE_PHY_TRSV0_LVCC		0x0dc
> +#define PCIE_PHY_TRSV1_EMP_LVL		0x144
> +#define PCIE_PHY_TRSV1_RXCDR		0x16c
> +#define PCIE_PHY_TRSV1_POWER		0x184
> +#define PCIE_PHY_TRSV1_PD_TSV		BIT(7)
> +#define PCIE_PHY_TRSV1_LVCC		0x19c
> +#define PCIE_PHY_TRSV2_EMP_LVL		0x204
> +#define PCIE_PHY_TRSV2_RXCDR		0x22c
> +#define PCIE_PHY_TRSV2_POWER		0x244
> +#define PCIE_PHY_TRSV2_PD_TSV		BIT(7)
> +#define PCIE_PHY_TRSV2_LVCC		0x25c
> +#define PCIE_PHY_TRSV3_EMP_LVL		0x2c4
> +#define PCIE_PHY_TRSV3_RXCDR		0x2ec
> +#define PCIE_PHY_TRSV3_POWER		0x304
> +#define PCIE_PHY_TRSV3_PD_TSV		BIT(7)
> +#define PCIE_PHY_TRSV3_LVCC		0x31c
> +
> +struct exynos_pcie_phy_data {
> +	const struct phy_ops	*ops;
> +};
> +
> +/* For Exynos pcie phy */
> +struct exynos_pcie_phy {
> +	const struct exynos_pcie_phy_data *drv_data;
> +	void __iomem *phy_base;
> +	void __iomem *blk_base; /* For exynos5440 */
> +};
> +
> +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset)
> +{
> +	writel(val, base + offset);
> +}
> +
> +static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset)
> +{
> +	return readl(base + offset);
> +}
> +
> +/* For Exynos5440 specific functions */
> +static int exynos5440_pcie_phy_init(struct phy *phy)
> +{
> +	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
> +
> +	/* DCC feedback control off */
> +	exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK);
> +
> +	/* set TX/RX impedance */
> +	exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE);
> +
> +	/* set 50Mhz PHY clock */
> +	exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0);
> +	exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1);
> +
> +	/* set TX Differential output for lane 0 */
> +	exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL);
> +
> +	/* set TX Pre-emphasis Level Control for lane 0 to minimum */
> +	exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL);
> +
> +	/* set RX clock and data recovery bandwidth */
> +	exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS);
> +	exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR);
> +	exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR);
> +	exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR);
> +	exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR);
> +
> +	/* change TX Pre-emphasis Level Control for lanes */
> +	exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL);
> +	exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL);
> +	exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL);
> +	exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL);
> +
> +	/* set LVCC */
> +	exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC);
> +	exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC);
> +	exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC);
> +	exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC);
> +
> +	/* pulse for common reset */
> +	exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET);
> +	udelay(500);
> +	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
> +
> +	return 0;
> +}
> +
> +static int exynos5440_pcie_phy_power_on(struct phy *phy)
> +{
> +	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
> +	u32 val;
> +
> +	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
> +	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG);
> +	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET);
> +	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET);
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
> +	val &= ~PCIE_PHY_COMMON_PD_CMN;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
> +	val &= ~PCIE_PHY_TRSV0_PD_TSV;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
> +	val &= ~PCIE_PHY_TRSV1_PD_TSV;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
> +	val &= ~PCIE_PHY_TRSV2_PD_TSV;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
> +	val &= ~PCIE_PHY_TRSV3_PD_TSV;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
> +
> +	return 0;
> +}
> +
> +static int exynos5440_pcie_phy_power_off(struct phy *phy)
> +{
> +	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
> +	u32 val;
> +
> +	if (readl_poll_timeout(ep->phy_base + PCIE_PHY_PLL_LOCKED, val,
> +				(val != 0), 1, 500)) {
> +		dev_err(&phy->dev, "PLL Locked: 0x%x\n", val);
> +		return -ETIMEDOUT;
> +	}
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
> +	val |= PCIE_PHY_COMMON_PD_CMN;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
> +	val |= PCIE_PHY_TRSV0_PD_TSV;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
> +	val |= PCIE_PHY_TRSV1_PD_TSV;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
> +	val |= PCIE_PHY_TRSV2_PD_TSV;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
> +
> +	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
> +	val |= PCIE_PHY_TRSV3_PD_TSV;
> +	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
> +
> +	return 0;
> +}
> +
> +static int exynos5440_pcie_phy_reset(struct phy *phy)
> +{
> +	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
> +
> +	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET);
> +	exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET);
> +	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET);
> +
> +	return 0;
> +}
> +
> +static const struct phy_ops exynos5440_phy_ops = {
> +	.init		= exynos5440_pcie_phy_init,
> +	.power_on	= exynos5440_pcie_phy_power_on,
> +	.power_off	= exynos5440_pcie_phy_power_off,
> +	.reset		= exynos5440_pcie_phy_reset,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = {
> +	.ops		= &exynos5440_phy_ops,
> +};
> +
> +static const struct of_device_id exynos_pcie_phy_match[] = {
> +	{
> +		.compatible = "samsung,exynos5440-pcie-phy",
> +		.data = &exynos5440_pcie_phy_data,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match);
> +
> +static int exynos_pcie_phy_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct exynos_pcie_phy *exynos_phy;
> +	struct phy *generic_phy;
> +	struct phy_provider *phy_provider;
> +	struct resource *res;
> +	const struct exynos_pcie_phy_data *drv_data;
> +
> +	drv_data = of_device_get_match_data(dev);
> +	if (!drv_data)
> +		return -ENODEV;
> +
> +	exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL);
> +	if (!exynos_phy)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	exynos_phy->phy_base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(exynos_phy->phy_base))
> +		return PTR_ERR(exynos_phy->phy_base);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	exynos_phy->blk_base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(exynos_phy->phy_base))
> +		return PTR_ERR(exynos_phy->phy_base);
> +
> +	exynos_phy->drv_data = drv_data;
> +
> +	generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops);
> +	if (IS_ERR(generic_phy)) {
> +		dev_err(dev, "failed to create PHY\n");
> +		return PTR_ERR(generic_phy);
> +	}
> +
> +	phy_set_drvdata(generic_phy, exynos_phy);
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static struct platform_driver exynos_pcie_phy_driver = {
> +	.probe	= exynos_pcie_phy_probe,
> +	.driver = {
> +		.of_match_table	= exynos_pcie_phy_match,
> +		.name		= "exynos_pcie_phy",
> +	}
> +};
> +module_platform_driver(exynos_pcie_phy_driver);
> +
> +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC PCIe PHY driver");
> +MODULE_AUTHOR("Jaehoon Chung<jh80.chung@samsung.com>");
> +MODULE_LICENSE("GPL v2");

rest looks good to me.
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Jaehoon Chung Feb. 15, 2017, 10:29 p.m. UTC | #2
Hi Vivek,

On 02/15/2017 02:24 PM, Vivek Gautam wrote:
> 
> On 02/13/2017 01:56 PM, Jaehoon Chung wrote:
>> This patch adds support for Generic PHY framework about Exynos SoCs.
>> Current Exynos PCIe driver doesn't use the PHY framework.
>> It's making a difficult to upstream the other Exynos variants because of
>> different PHY registers.
>>
>> Move the codes relevant to PHY from Exnyos PCIe driver to PHY Exynos PCIe
>> driver.
>>
>> Signed-off-by: Jaehoon Chung<jh80.chung@samsung.com>
>> Acked-by: Krzysztof Kozlowski<krzk@kernel.org>
>> Reviewed-by: Jingoo Han<jingoohan1@gmail.com>
>> Reviewed-by: Pankaj Dubey<pankaj.dubey@samsung.com>
>> ---
>> Changelog on V3:
>> - Remove the dependency abot PCI_EXYNOS
>> - Adds a depends on COMPILE_TEST
>> - Use the readl_poll_timeout() instead of while()
>> - Fixes const type
>> - Adds MODULE_DESCRIPTION()/LICENCSE()/AUTHOR()
>> - Changes commit message
>>
>> Changelog on V2:
>> - Not include the codes relevant to pci-exynos.
>> - Remove the getting child node.
>>
>>   drivers/phy/Kconfig           |   8 ++
>>   drivers/phy/Makefile          |   1 +
>>   drivers/phy/phy-exynos-pcie.c | 285 ++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 294 insertions(+)
>>   create mode 100644 drivers/phy/phy-exynos-pcie.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index e8eb7f2..8659f38 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -331,6 +331,14 @@ config PHY_EXYNOS5_USBDRD
>>         This driver provides PHY interface for USB 3.0 DRD controller
>>         present on Exynos5 SoC series.
>>   +config PHY_EXYNOS_PCIE
>> +    bool "Exynos PCIe PHY driver"
>> +    depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
> 
> this should be other way round if your driver runs only with OF enabled.
>           depends on OF && (ARCH_EXYNOS || COMPILE_TEST)

Will update.

> 
>> +    select GENERIC_PHY
>> +    help
>> +      Enable PCIe PHY support for Exynos SoC series.
>> +      This driver provides PHY interface for Exynos PCIe controller.
>> +
>>   config PHY_PISTACHIO_USB
>>       tristate "IMG Pistachio USB2.0 PHY driver"
>>       depends on MACH_PISTACHIO
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index 65eb2f4..081aeb4 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2)    += phy-exynos4x12-usb2.o
>>   phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)    += phy-exynos5250-usb2.o
>>   phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)    += phy-s5pv210-usb2.o
>>   obj-$(CONFIG_PHY_EXYNOS5_USBDRD)    += phy-exynos5-usbdrd.o
>> +obj-$(CONFIG_PHY_EXYNOS_PCIE)    += phy-exynos-pcie.o
>>   obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)    += phy-qcom-apq8064-sata.o
>>   obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
>>   obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)    += phy-rockchip-inno-usb2.o
>> diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c
>> new file mode 100644
>> index 0000000..9ec1855
>> --- /dev/null
>> +++ b/drivers/phy/phy-exynos-pcie.c
>> @@ -0,0 +1,285 @@
>> +/*
>> + * Samsung EXYNOS SoC series PCIe PHY driver
>> + *
>> + * Phy provider for PCIe controller on Exynos SoC series
>> + *
>> + * Copyright (C) 2016 Samsung Electronics Co., Ltd.
> 
> nit: copyright year.

Will do.

Thanks for reviewing.

Best Regards,
Jaehoon Chung

> 
>> + * Jaehoon Chung<jh80.chung@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/io.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/regmap.h>
>> +
>> +/* PCIe Purple registers */
>> +#define PCIE_PHY_GLOBAL_RESET        0x000
>> +#define PCIE_PHY_COMMON_RESET        0x004
>> +#define PCIE_PHY_CMN_REG        0x008
>> +#define PCIE_PHY_MAC_RESET        0x00c
>> +#define PCIE_PHY_PLL_LOCKED        0x010
>> +#define PCIE_PHY_TRSVREG_RESET        0x020
>> +#define PCIE_PHY_TRSV_RESET        0x024
>> +
>> +/* PCIe PHY registers */
>> +#define PCIE_PHY_IMPEDANCE        0x004
>> +#define PCIE_PHY_PLL_DIV_0        0x008
>> +#define PCIE_PHY_PLL_BIAS        0x00c
>> +#define PCIE_PHY_DCC_FEEDBACK        0x014
>> +#define PCIE_PHY_PLL_DIV_1        0x05c
>> +#define PCIE_PHY_COMMON_POWER        0x064
>> +#define PCIE_PHY_COMMON_PD_CMN        BIT(3)
>> +#define PCIE_PHY_TRSV0_EMP_LVL        0x084
>> +#define PCIE_PHY_TRSV0_DRV_LVL        0x088
>> +#define PCIE_PHY_TRSV0_RXCDR        0x0ac
>> +#define PCIE_PHY_TRSV0_POWER        0x0c4
>> +#define PCIE_PHY_TRSV0_PD_TSV        BIT(7)
>> +#define PCIE_PHY_TRSV0_LVCC        0x0dc
>> +#define PCIE_PHY_TRSV1_EMP_LVL        0x144
>> +#define PCIE_PHY_TRSV1_RXCDR        0x16c
>> +#define PCIE_PHY_TRSV1_POWER        0x184
>> +#define PCIE_PHY_TRSV1_PD_TSV        BIT(7)
>> +#define PCIE_PHY_TRSV1_LVCC        0x19c
>> +#define PCIE_PHY_TRSV2_EMP_LVL        0x204
>> +#define PCIE_PHY_TRSV2_RXCDR        0x22c
>> +#define PCIE_PHY_TRSV2_POWER        0x244
>> +#define PCIE_PHY_TRSV2_PD_TSV        BIT(7)
>> +#define PCIE_PHY_TRSV2_LVCC        0x25c
>> +#define PCIE_PHY_TRSV3_EMP_LVL        0x2c4
>> +#define PCIE_PHY_TRSV3_RXCDR        0x2ec
>> +#define PCIE_PHY_TRSV3_POWER        0x304
>> +#define PCIE_PHY_TRSV3_PD_TSV        BIT(7)
>> +#define PCIE_PHY_TRSV3_LVCC        0x31c
>> +
>> +struct exynos_pcie_phy_data {
>> +    const struct phy_ops    *ops;
>> +};
>> +
>> +/* For Exynos pcie phy */
>> +struct exynos_pcie_phy {
>> +    const struct exynos_pcie_phy_data *drv_data;
>> +    void __iomem *phy_base;
>> +    void __iomem *blk_base; /* For exynos5440 */
>> +};
>> +
>> +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset)
>> +{
>> +    writel(val, base + offset);
>> +}
>> +
>> +static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset)
>> +{
>> +    return readl(base + offset);
>> +}
>> +
>> +/* For Exynos5440 specific functions */
>> +static int exynos5440_pcie_phy_init(struct phy *phy)
>> +{
>> +    struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
>> +
>> +    /* DCC feedback control off */
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK);
>> +
>> +    /* set TX/RX impedance */
>> +    exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE);
>> +
>> +    /* set 50Mhz PHY clock */
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1);
>> +
>> +    /* set TX Differential output for lane 0 */
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL);
>> +
>> +    /* set TX Pre-emphasis Level Control for lane 0 to minimum */
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL);
>> +
>> +    /* set RX clock and data recovery bandwidth */
>> +    exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR);
>> +
>> +    /* change TX Pre-emphasis Level Control for lanes */
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL);
>> +
>> +    /* set LVCC */
>> +    exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC);
>> +    exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC);
>> +
>> +    /* pulse for common reset */
>> +    exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET);
>> +    udelay(500);
>> +    exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
>> +
>> +    return 0;
>> +}
>> +
>> +static int exynos5440_pcie_phy_power_on(struct phy *phy)
>> +{
>> +    struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
>> +    u32 val;
>> +
>> +    exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
>> +    exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG);
>> +    exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET);
>> +    exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET);
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
>> +    val &= ~PCIE_PHY_COMMON_PD_CMN;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
>> +    val &= ~PCIE_PHY_TRSV0_PD_TSV;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
>> +    val &= ~PCIE_PHY_TRSV1_PD_TSV;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
>> +    val &= ~PCIE_PHY_TRSV2_PD_TSV;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
>> +    val &= ~PCIE_PHY_TRSV3_PD_TSV;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
>> +
>> +    return 0;
>> +}
>> +
>> +static int exynos5440_pcie_phy_power_off(struct phy *phy)
>> +{
>> +    struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
>> +    u32 val;
>> +
>> +    if (readl_poll_timeout(ep->phy_base + PCIE_PHY_PLL_LOCKED, val,
>> +                (val != 0), 1, 500)) {
>> +        dev_err(&phy->dev, "PLL Locked: 0x%x\n", val);
>> +        return -ETIMEDOUT;
>> +    }
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
>> +    val |= PCIE_PHY_COMMON_PD_CMN;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
>> +    val |= PCIE_PHY_TRSV0_PD_TSV;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
>> +    val |= PCIE_PHY_TRSV1_PD_TSV;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
>> +    val |= PCIE_PHY_TRSV2_PD_TSV;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
>> +
>> +    val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
>> +    val |= PCIE_PHY_TRSV3_PD_TSV;
>> +    exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
>> +
>> +    return 0;
>> +}
>> +
>> +static int exynos5440_pcie_phy_reset(struct phy *phy)
>> +{
>> +    struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
>> +
>> +    exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET);
>> +    exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET);
>> +    exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct phy_ops exynos5440_phy_ops = {
>> +    .init        = exynos5440_pcie_phy_init,
>> +    .power_on    = exynos5440_pcie_phy_power_on,
>> +    .power_off    = exynos5440_pcie_phy_power_off,
>> +    .reset        = exynos5440_pcie_phy_reset,
>> +    .owner        = THIS_MODULE,
>> +};
>> +
>> +static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = {
>> +    .ops        = &exynos5440_phy_ops,
>> +};
>> +
>> +static const struct of_device_id exynos_pcie_phy_match[] = {
>> +    {
>> +        .compatible = "samsung,exynos5440-pcie-phy",
>> +        .data = &exynos5440_pcie_phy_data,
>> +    },
>> +    {},
>> +};
>> +MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match);
>> +
>> +static int exynos_pcie_phy_probe(struct platform_device *pdev)
>> +{
>> +    struct device *dev = &pdev->dev;
>> +    struct exynos_pcie_phy *exynos_phy;
>> +    struct phy *generic_phy;
>> +    struct phy_provider *phy_provider;
>> +    struct resource *res;
>> +    const struct exynos_pcie_phy_data *drv_data;
>> +
>> +    drv_data = of_device_get_match_data(dev);
>> +    if (!drv_data)
>> +        return -ENODEV;
>> +
>> +    exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL);
>> +    if (!exynos_phy)
>> +        return -ENOMEM;
>> +
>> +    res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +    exynos_phy->phy_base = devm_ioremap_resource(dev, res);
>> +    if (IS_ERR(exynos_phy->phy_base))
>> +        return PTR_ERR(exynos_phy->phy_base);
>> +
>> +    res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>> +    exynos_phy->blk_base = devm_ioremap_resource(dev, res);
>> +    if (IS_ERR(exynos_phy->phy_base))
>> +        return PTR_ERR(exynos_phy->phy_base);
>> +
>> +    exynos_phy->drv_data = drv_data;
>> +
>> +    generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops);
>> +    if (IS_ERR(generic_phy)) {
>> +        dev_err(dev, "failed to create PHY\n");
>> +        return PTR_ERR(generic_phy);
>> +    }
>> +
>> +    phy_set_drvdata(generic_phy, exynos_phy);
>> +    phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> +
>> +    return PTR_ERR_OR_ZERO(phy_provider);
>> +}
>> +
>> +static struct platform_driver exynos_pcie_phy_driver = {
>> +    .probe    = exynos_pcie_phy_probe,
>> +    .driver = {
>> +        .of_match_table    = exynos_pcie_phy_match,
>> +        .name        = "exynos_pcie_phy",
>> +    }
>> +};
>> +module_platform_driver(exynos_pcie_phy_driver);
>> +
>> +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC PCIe PHY driver");
>> +MODULE_AUTHOR("Jaehoon Chung<jh80.chung@samsung.com>");
>> +MODULE_LICENSE("GPL v2");
> 
> rest looks good to me.
> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index e8eb7f2..8659f38 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -331,6 +331,14 @@  config PHY_EXYNOS5_USBDRD
 	  This driver provides PHY interface for USB 3.0 DRD controller
 	  present on Exynos5 SoC series.
 
+config PHY_EXYNOS_PCIE
+	bool "Exynos PCIe PHY driver"
+	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable PCIe PHY support for Exynos SoC series.
+	  This driver provides PHY interface for Exynos PCIe controller.
+
 config PHY_PISTACHIO_USB
 	tristate "IMG Pistachio USB2.0 PHY driver"
 	depends on MACH_PISTACHIO
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 65eb2f4..081aeb4 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -37,6 +37,7 @@  phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2)	+= phy-exynos4x12-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
+obj-$(CONFIG_PHY_EXYNOS_PCIE)	+= phy-exynos-pcie.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c
new file mode 100644
index 0000000..9ec1855
--- /dev/null
+++ b/drivers/phy/phy-exynos-pcie.c
@@ -0,0 +1,285 @@ 
+/*
+ * Samsung EXYNOS SoC series PCIe PHY driver
+ *
+ * Phy provider for PCIe controller on Exynos SoC series
+ *
+ * Copyright (C) 2016 Samsung Electronics Co., Ltd.
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+/* PCIe Purple registers */
+#define PCIE_PHY_GLOBAL_RESET		0x000
+#define PCIE_PHY_COMMON_RESET		0x004
+#define PCIE_PHY_CMN_REG		0x008
+#define PCIE_PHY_MAC_RESET		0x00c
+#define PCIE_PHY_PLL_LOCKED		0x010
+#define PCIE_PHY_TRSVREG_RESET		0x020
+#define PCIE_PHY_TRSV_RESET		0x024
+
+/* PCIe PHY registers */
+#define PCIE_PHY_IMPEDANCE		0x004
+#define PCIE_PHY_PLL_DIV_0		0x008
+#define PCIE_PHY_PLL_BIAS		0x00c
+#define PCIE_PHY_DCC_FEEDBACK		0x014
+#define PCIE_PHY_PLL_DIV_1		0x05c
+#define PCIE_PHY_COMMON_POWER		0x064
+#define PCIE_PHY_COMMON_PD_CMN		BIT(3)
+#define PCIE_PHY_TRSV0_EMP_LVL		0x084
+#define PCIE_PHY_TRSV0_DRV_LVL		0x088
+#define PCIE_PHY_TRSV0_RXCDR		0x0ac
+#define PCIE_PHY_TRSV0_POWER		0x0c4
+#define PCIE_PHY_TRSV0_PD_TSV		BIT(7)
+#define PCIE_PHY_TRSV0_LVCC		0x0dc
+#define PCIE_PHY_TRSV1_EMP_LVL		0x144
+#define PCIE_PHY_TRSV1_RXCDR		0x16c
+#define PCIE_PHY_TRSV1_POWER		0x184
+#define PCIE_PHY_TRSV1_PD_TSV		BIT(7)
+#define PCIE_PHY_TRSV1_LVCC		0x19c
+#define PCIE_PHY_TRSV2_EMP_LVL		0x204
+#define PCIE_PHY_TRSV2_RXCDR		0x22c
+#define PCIE_PHY_TRSV2_POWER		0x244
+#define PCIE_PHY_TRSV2_PD_TSV		BIT(7)
+#define PCIE_PHY_TRSV2_LVCC		0x25c
+#define PCIE_PHY_TRSV3_EMP_LVL		0x2c4
+#define PCIE_PHY_TRSV3_RXCDR		0x2ec
+#define PCIE_PHY_TRSV3_POWER		0x304
+#define PCIE_PHY_TRSV3_PD_TSV		BIT(7)
+#define PCIE_PHY_TRSV3_LVCC		0x31c
+
+struct exynos_pcie_phy_data {
+	const struct phy_ops	*ops;
+};
+
+/* For Exynos pcie phy */
+struct exynos_pcie_phy {
+	const struct exynos_pcie_phy_data *drv_data;
+	void __iomem *phy_base;
+	void __iomem *blk_base; /* For exynos5440 */
+};
+
+static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset)
+{
+	writel(val, base + offset);
+}
+
+static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+/* For Exynos5440 specific functions */
+static int exynos5440_pcie_phy_init(struct phy *phy)
+{
+	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+
+	/* DCC feedback control off */
+	exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK);
+
+	/* set TX/RX impedance */
+	exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE);
+
+	/* set 50Mhz PHY clock */
+	exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0);
+	exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1);
+
+	/* set TX Differential output for lane 0 */
+	exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL);
+
+	/* set TX Pre-emphasis Level Control for lane 0 to minimum */
+	exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL);
+
+	/* set RX clock and data recovery bandwidth */
+	exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS);
+	exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR);
+	exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR);
+	exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR);
+	exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR);
+
+	/* change TX Pre-emphasis Level Control for lanes */
+	exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL);
+	exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL);
+	exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL);
+	exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL);
+
+	/* set LVCC */
+	exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC);
+	exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC);
+	exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC);
+	exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC);
+
+	/* pulse for common reset */
+	exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET);
+	udelay(500);
+	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
+
+	return 0;
+}
+
+static int exynos5440_pcie_phy_power_on(struct phy *phy)
+{
+	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+	u32 val;
+
+	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
+	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG);
+	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET);
+	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET);
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
+	val &= ~PCIE_PHY_COMMON_PD_CMN;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
+	val &= ~PCIE_PHY_TRSV0_PD_TSV;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
+	val &= ~PCIE_PHY_TRSV1_PD_TSV;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
+	val &= ~PCIE_PHY_TRSV2_PD_TSV;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
+	val &= ~PCIE_PHY_TRSV3_PD_TSV;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
+
+	return 0;
+}
+
+static int exynos5440_pcie_phy_power_off(struct phy *phy)
+{
+	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+	u32 val;
+
+	if (readl_poll_timeout(ep->phy_base + PCIE_PHY_PLL_LOCKED, val,
+				(val != 0), 1, 500)) {
+		dev_err(&phy->dev, "PLL Locked: 0x%x\n", val);
+		return -ETIMEDOUT;
+	}
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
+	val |= PCIE_PHY_COMMON_PD_CMN;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
+	val |= PCIE_PHY_TRSV0_PD_TSV;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
+	val |= PCIE_PHY_TRSV1_PD_TSV;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
+	val |= PCIE_PHY_TRSV2_PD_TSV;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
+
+	val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
+	val |= PCIE_PHY_TRSV3_PD_TSV;
+	exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
+
+	return 0;
+}
+
+static int exynos5440_pcie_phy_reset(struct phy *phy)
+{
+	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+
+	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET);
+	exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET);
+	exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET);
+
+	return 0;
+}
+
+static const struct phy_ops exynos5440_phy_ops = {
+	.init		= exynos5440_pcie_phy_init,
+	.power_on	= exynos5440_pcie_phy_power_on,
+	.power_off	= exynos5440_pcie_phy_power_off,
+	.reset		= exynos5440_pcie_phy_reset,
+	.owner		= THIS_MODULE,
+};
+
+static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = {
+	.ops		= &exynos5440_phy_ops,
+};
+
+static const struct of_device_id exynos_pcie_phy_match[] = {
+	{
+		.compatible = "samsung,exynos5440-pcie-phy",
+		.data = &exynos5440_pcie_phy_data,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match);
+
+static int exynos_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct exynos_pcie_phy *exynos_phy;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	const struct exynos_pcie_phy_data *drv_data;
+
+	drv_data = of_device_get_match_data(dev);
+	if (!drv_data)
+		return -ENODEV;
+
+	exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL);
+	if (!exynos_phy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	exynos_phy->phy_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(exynos_phy->phy_base))
+		return PTR_ERR(exynos_phy->phy_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	exynos_phy->blk_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(exynos_phy->phy_base))
+		return PTR_ERR(exynos_phy->phy_base);
+
+	exynos_phy->drv_data = drv_data;
+
+	generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, exynos_phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver exynos_pcie_phy_driver = {
+	.probe	= exynos_pcie_phy_probe,
+	.driver = {
+		.of_match_table	= exynos_pcie_phy_match,
+		.name		= "exynos_pcie_phy",
+	}
+};
+module_platform_driver(exynos_pcie_phy_driver);
+
+MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC PCIe PHY driver");
+MODULE_AUTHOR("Jaehoon Chung <jh80.chung@samsung.com>");
+MODULE_LICENSE("GPL v2");