diff mbox

[PATCHv6,10/10] ARM: dts: STiH410: update sti-cec for CEC notifier support

Message ID 20170331122036.55706-11-hverkuil@xs4all.nl (mailing list archive)
State Not Applicable
Headers show

Commit Message

Hans Verkuil March 31, 2017, 12:20 p.m. UTC 
From: Benjamin Gaignard <benjamin.gaignard@linaro.org>

To use CEC notifier sti CEC driver needs to get phandle
of the hdmi device.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
CC: devicetree@vger.kernel.org
---
 arch/arm/boot/dts/stih407-family.dtsi | 12 ------------
 arch/arm/boot/dts/stih410.dtsi        | 13 +++++++++++++
 2 files changed, 13 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index d753ac36788f..044184580326 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -742,18 +742,6 @@ 
 				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
 		};
 
-		cec: sti-cec@094a087c {
-			compatible = "st,stih-cec";
-			reg = <0x94a087c 0x64>;
-			clocks = <&clk_sysin>;
-			clock-names = "cec-clk";
-			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
-			interrupt-names = "cec-irq";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_cec0_default>;
-			resets = <&softreset STIH407_LPM_SOFTRESET>;
-		};
-
 		rng10: rng@08a89000 {
 			compatible      = "st,rng";
 			reg		= <0x08a89000 0x1000>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 3c9672c5b09f..21fe72b183d8 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -281,5 +281,18 @@ 
 				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
 				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
 		};
+
+		sti-cec@094a087c {
+			compatible = "st,stih-cec";
+			reg = <0x94a087c 0x64>;
+			clocks = <&clk_sysin>;
+			clock-names = "cec-clk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+			interrupt-names = "cec-irq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_cec0_default>;
+			resets = <&softreset STIH407_LPM_SOFTRESET>;
+			hdmi-phandle = <&sti_hdmi>;
+		};
 	};
 };