| Message ID | 20171109100645.GA32635@lineageos.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Thu, Nov 09, 2017 at 09:06:45PM +1100, Simon Shields wrote: > This patch allows the bcm4334 to power on and enables > wifi functionality on trats2. > > Signed-off-by: Simon Shields <simon@lineageos.org> > --- > arch/arm/boot/dts/exynos4412-trats2.dts | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts > index bceb919ac637..1bf1943ba7a1 100644 > --- a/arch/arm/boot/dts/exynos4412-trats2.dts > +++ b/arch/arm/boot/dts/exynos4412-trats2.dts > @@ -241,6 +241,13 @@ > > }; > > + wlan_pwrseq: sdhci3-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; > + clocks = <&max77686 MAX77686_CLK_PMIC>; > + clock-names = "ext_clock"; > + }; > + > sound { > compatible = "samsung,trats2-audio"; > samsung,i2s-controller = <&i2s0>; > @@ -1239,6 +1246,27 @@ > status = "okay"; > }; > > +&sdhci_3 { > + #address-cells = <1>; > + #size-cells = <0>; > + non-removable; > + bus-width = <4>; > + > + mmc-pwrseq = <&wlan_pwrseq>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; > + vmmc-supply = <&ldo21_reg>; How did you get LDO21 here? It does not look correct. > + status = "okay"; > + > + brcmf: brcmf@1 { The node name should be generic class of device, thus maybe "wifi"? Label can stay although I see it is not used now. Best regards, Krzysztof > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + interrupt-parent = <&gpx2>; > + interrupts = <5 IRQ_TYPE_NONE>; > + interrupt-names = "host-wake"; > + }; > +}; > + > &serial_0 { > status = "okay"; > }; > -- > 2.15.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index bceb919ac637..1bf1943ba7a1 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -241,6 +241,13 @@ }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; + sound { compatible = "samsung,trats2-audio"; samsung,i2s-controller = <&i2s0>; @@ -1239,6 +1246,27 @@ status = "okay"; }; +&sdhci_3 { + #address-cells = <1>; + #size-cells = <0>; + non-removable; + bus-width = <4>; + + mmc-pwrseq = <&wlan_pwrseq>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + vmmc-supply = <&ldo21_reg>; + status = "okay"; + + brcmf: brcmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_NONE>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { status = "okay"; };
This patch allows the bcm4334 to power on and enables wifi functionality on trats2. Signed-off-by: Simon Shields <simon@lineageos.org> --- arch/arm/boot/dts/exynos4412-trats2.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)