| Message ID | 20180227151405.9618-1-m.szyprowski@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Tuesday, February 27, 2018 04:14:05 PM Marek Szyprowski wrote: > tmu_read() in case of Exynos4210 might return error for out of bound > values. Current code ignores such value, what leads to reporting critical > temperature value. Add proper error code propagation to exynos_get_temp() > function. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > CC: stable@vger.kernel.org # v4.6+ Thanks for fixing this. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > --- > This patch is prepared on top of "thermal: exynos: Reading temperature > makes sense only when TMU is turned on" patch. Both are required > to finally fix thermal support on Exynos4210 based boards. > > This patch only applies cleanly together with the mentioned "thermal: > exynos: Reading temperature makes sense only when TMU is turned on" > patch on v4.6+ kernels. You may also add: Fixes: 3b6a1a805f34 ("thermal: samsung: core: Exynos TMU rework to use device tree for configuration") to the patch description. Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 986cbd01aaaa..74adeb1d2daf 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -892,6 +892,7 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on) static int exynos_get_temp(void *p, int *temp) { struct exynos_tmu_data *data = p; + int value, ret = 0; if (!data || !data->tmu_read || !data->enabled) return -EINVAL; @@ -899,12 +900,16 @@ static int exynos_get_temp(void *p, int *temp) mutex_lock(&data->lock); clk_enable(data->clk); - *temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS; + value = data->tmu_read(data); + if (value < 0) + ret = value; + else + *temp = code_to_temp(data, value) * MCELSIUS; clk_disable(data->clk); mutex_unlock(&data->lock); - return 0; + return ret; } #ifdef CONFIG_THERMAL_EMULATION
tmu_read() in case of Exynos4210 might return error for out of bound values. Current code ignores such value, what leads to reporting critical temperature value. Add proper error code propagation to exynos_get_temp() function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: stable@vger.kernel.org # v4.6+ --- This patch is prepared on top of "thermal: exynos: Reading temperature makes sense only when TMU is turned on" patch. Both are required to finally fix thermal support on Exynos4210 based boards. This patch only applies cleanly together with the mentioned "thermal: exynos: Reading temperature makes sense only when TMU is turned on" patch on v4.6+ kernels. --- drivers/thermal/samsung/exynos_tmu.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)