[v2] serial: samsung: check DMA engine capabilities before using DMA mode

Commit Message

Marek Szyprowski May 17, 2018, 11:37 a.m. UTC

DMA engine driver might not always provide all the features needed by
serial driver to properly operate in DMA mode, so check that before
selecting DMA mode.

Signed-off-by: Marek Szyprowski <[e-mail]>
---
v2:
- added warnings with exact reason for not using DMA mode
---
 drivers/tty/serial/samsung.c | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski May 17, 2018, 12:18 p.m. UTC | #1

On Thu, May 17, 2018 at 1:37 PM, Marek Szyprowski
<[e-mail]> wrote:
> DMA engine driver might not always provide all the features needed by
> serial driver to properly operate in DMA mode, so check that before
> selecting DMA mode.
>
> Signed-off-by: Marek Szyprowski <[e-mail]>
> ---
> v2:
> - added warnings with exact reason for not using DMA mode
> ---
>  drivers/tty/serial/samsung.c | 33 +++++++++++++++++++++++++++++----
>  1 file changed, 29 insertions(+), 4 deletions(-)
>

Reviewed-by: Krzysztof Kozlowski <[e-mail]>

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 64e96926f1ad..2f8fa184aafa 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -856,6 +856,8 @@  static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
 static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 {
 	struct s3c24xx_uart_dma	*dma = p->dma;
+	struct dma_slave_caps dma_caps;
+	const char *reason = NULL;
 	int ret;
 
 	/* Default slave configuration parameters */
@@ -871,17 +873,37 @@  static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 
 	dma->rx_chan = dma_request_chan(p->port.dev, "rx");
 
-	if (IS_ERR(dma->rx_chan))
-		return PTR_ERR(dma->rx_chan);
+	if (IS_ERR(dma->rx_chan)) {
+		reason = "DMA RX channel request failed";
+		ret = PTR_ERR(dma->rx_chan);
+		goto err_warn;
+	}
+
+	ret = dma_get_slave_caps(dma->rx_chan, &dma_caps);
+	if (ret < 0 ||
+	    dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
+		reason = "insufficient DMA RX engine capabilities";
+		ret = -EOPNOTSUPP;
+		goto err_release_rx;
+	}
 
 	dmaengine_slave_config(dma->rx_chan, &dma->rx_conf);
 
 	dma->tx_chan = dma_request_chan(p->port.dev, "tx");
 	if (IS_ERR(dma->tx_chan)) {
+		reason = "DMA TX channel request failed";
 		ret = PTR_ERR(dma->tx_chan);
 		goto err_release_rx;
 	}
 
+	ret = dma_get_slave_caps(dma->tx_chan, &dma_caps);
+	if (ret < 0 ||
+	    dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
+		reason = "insufficient DMA TX engine capabilities";
+		ret = -EOPNOTSUPP;
+		goto err_release_tx;
+	}
+
 	dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
 
 	/* RX buffer */
@@ -896,6 +918,7 @@  static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 	dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
 				dma->rx_size, DMA_FROM_DEVICE);
 	if (dma_mapping_error(p->port.dev, dma->rx_addr)) {
+		reason = "DMA mapping error for RX buffer";
 		ret = -EIO;
 		goto err_free_rx;
 	}
@@ -904,6 +927,7 @@  static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 	dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
 				UART_XMIT_SIZE, DMA_TO_DEVICE);
 	if (dma_mapping_error(p->port.dev, dma->tx_addr)) {
+		reason = "DMA mapping error for TX buffer";
 		ret = -EIO;
 		goto err_unmap_rx;
 	}
@@ -919,6 +943,9 @@  static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 	dma_release_channel(dma->tx_chan);
 err_release_rx:
 	dma_release_channel(dma->rx_chan);
+err_warn:
+	if (reason)
+		dev_warn(p->port.dev, "%s, DMA will not be used\n", reason);
 	return ret;
 }
 
@@ -1037,8 +1064,6 @@  static int s3c64xx_serial_startup(struct uart_port *port)
 	if (ourport->dma) {
 		ret = s3c24xx_serial_request_dma(ourport);
 		if (ret < 0) {
-			dev_warn(port->dev,
-				 "DMA request failed, DMA will not be used\n");
 			devm_kfree(port->dev, ourport->dma);
 			ourport->dma = NULL;
 		}