| Message ID | 20180721125128.31498-2-simon@lineageos.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
On Sat, Jul 21, 2018 at 10:50:49PM +1000, Simon Shields wrote: > Currently, we assume that the bootloader has correctly configured > the interrupt pin for max77693. This might not actually be the case - > so it's better to configure it explicitly. > > Signed-off-by: Simon Shields <simon@lineageos.org> > --- > arch/arm/boot/dts/exynos4412-midas.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) Thanks, applied. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index f12372509061..ee7cda1432f7 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -156,6 +156,8 @@ compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&max77693_irq>; reg = <0x66>; regulators { @@ -1124,6 +1126,11 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep1>; + max77693_irq: max77693-irq { + samsung,pins = "gpx1-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
Currently, we assume that the bootloader has correctly configured the interrupt pin for max77693. This might not actually be the case - so it's better to configure it explicitly. Signed-off-by: Simon Shields <simon@lineageos.org> --- arch/arm/boot/dts/exynos4412-midas.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)