diff mbox series

[v5,9/9] dt-bindings: exynos_dsim: update of graph bindings

Message ID 20180725154644.25412-10-a.hajda@samsung.com (mailing list archive)
State Not Applicable
Headers show
Series Add TOSHIBA TC358764 DSI/LVDS bridge driver | expand

Commit Message

Andrzej Hajda July 25, 2018, 3:46 p.m. UTC
Of-graph bindings should describe ports present in the device, not the
devices it can be connected to. The patch replaces verbose description
with shorter but more precise one. While at it clock related properties
are moved to the main node as it is their actual location.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
---
 .../bindings/display/exynos/exynos_dsim.txt   | 25 +++++--------------
 1 file changed, 6 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index 2fff8b406f4c..be377786e8cd 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -21,6 +21,9 @@  Required properties:
   - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
   - #address-cells, #size-cells: should be set respectively to <1> and <0>
     according to DSI host bindings (see MIPI DSI bindings [1])
+  - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
+    mode
+  - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
 
 Optional properties:
   - power-domains: a phandle to DSIM power domain node
@@ -29,25 +32,9 @@  Child nodes:
   Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
 
 Video interfaces:
-  Device node can contain video interface port nodes according to [2].
-  The following are properties specific to those nodes:
-
-  port node inbound:
-    - reg: (required) must be 0.
-  port node outbound:
-    - reg: (required) must be 1.
-
-  endpoint node connected from mic node (reg = 0):
-    - remote-endpoint: specifies the endpoint in mic node. This node is required
-		       for Exynos5433 mipi dsi. So mic can access to panel node
-		       throughout this dsi node.
-  endpoint node connected to panel node (reg = 1):
-    - remote-endpoint: specifies the endpoint in panel node. This node is
-		       required in all kinds of exynos mipi dsi to represent
-		       the connection between mipi dsi and panel.
-    - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
-      mode
-    - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
+  Device node can contain following video interface port nodes according to [2]:
+  0: RGB input,
+  1: DSI output
 
 [1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt