| Message ID | 20181113153847.14732-1-m.szyprowski@samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | a2dc50914744eea9f83a70a5db0486be625e5dc0 |
| Headers | show |
| Series | extcon: max8997: Fix lack of path setting in USB device mode | expand |
On 2018년 11월 14일 00:38, Marek Szyprowski wrote: > MAX8997 driver disables automatic path selection from MicroUSB connector > and manually sets path to either UART or USB lines. However the code for > setting USB path worked only for USB host mode (when ID pin is set > to ground). When standard USB cable (USB device mode) is connected, path > registers are not touched. This means that once the non-USB accessory is > connected to MAX8997-operated micro USB port, the path is no longer set > to USB and USB device mode doesn't work. This patch fixes it by setting > USB path both for USB and USB host modes. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > drivers/extcon/extcon-max8997.c | 10 ++++------ > 1 file changed, 4 insertions(+), 6 deletions(-) > > diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c > index 632192d027bf..172e116ac1ce 100644 > --- a/drivers/extcon/extcon-max8997.c > +++ b/drivers/extcon/extcon-max8997.c > @@ -311,12 +311,10 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info, > { > int ret = 0; > > - if (usb_type == MAX8997_USB_HOST) { > - ret = max8997_muic_set_path(info, info->path_usb, attached); > - if (ret < 0) { > - dev_err(info->dev, "failed to update muic register\n"); > - return ret; > - } > + ret = max8997_muic_set_path(info, info->path_usb, attached); > + if (ret < 0) { > + dev_err(info->dev, "failed to update muic register\n"); > + return ret; > } > > switch (usb_type) { > Applied it. Thanks.
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 632192d027bf..172e116ac1ce 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -311,12 +311,10 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info, { int ret = 0; - if (usb_type == MAX8997_USB_HOST) { - ret = max8997_muic_set_path(info, info->path_usb, attached); - if (ret < 0) { - dev_err(info->dev, "failed to update muic register\n"); - return ret; - } + ret = max8997_muic_set_path(info, info->path_usb, attached); + if (ret < 0) { + dev_err(info->dev, "failed to update muic register\n"); + return ret; } switch (usb_type) {
MAX8997 driver disables automatic path selection from MicroUSB connector and manually sets path to either UART or USB lines. However the code for setting USB path worked only for USB host mode (when ID pin is set to ground). When standard USB cable (USB device mode) is connected, path registers are not touched. This means that once the non-USB accessory is connected to MAX8997-operated micro USB port, the path is no longer set to USB and USB device mode doesn't work. This patch fixes it by setting USB path both for USB and USB host modes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- drivers/extcon/extcon-max8997.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)