| Message ID | 20190629114739.11702-2-krzk@kernel.org (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 841ed60264b3d37d5bf3e32cff168920e4923f88 |
| Headers | show |
| Series | [1/2] ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family | expand |
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index ac7f2fa0ba22..592d7b45ecc8 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -723,15 +723,15 @@ buck7_reg: BUCK7 { regulator-name = "VIN_LLDO_1V4"; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; buck8_reg: BUCK8 { regulator-name = "VIN_MLDO_2V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; regulator-always-on; };
The datasheet of S2MPS11 PMIC is slightly non-consistent in buck[78] voltage regulators values. 1. The voltage tables for configuring their registers mention range of voltages: 0.750 V to 3.55 V, 2. The constrains in electrical specifications say output voltage range to be different (buck7: 1.2 V to 1.5 V, buck8: 1.8 V to 2.1 V). Adjust the ranges to match the electrical specifications to stay on the safe side. Anyway these regulators stay at default value so this should not have effect. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos5420-arndale-octa.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)