diff mbox series

[v1,01/50] clk: samsung: add new IDs for Exynos5420 clocks

Message ID 20190715124417.4787-2-l.luba@partner.samsung.com (mailing list archive)
State Not Applicable
Headers show
Series [v1,01/50] clk: samsung: add new IDs for Exynos5420 clocks | expand

Commit Message

Lukasz Luba July 15, 2019, 12:43 p.m. UTC 
There is a need of new IDs which will be used for modeling proper hierarchy
in the Exynos54xx SoCs. Previous implementation rely on bootloader
settings, which are not configuring properly some clocks.
These IDs provide interface to set proper parents.

Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
 include/dt-bindings/clock/exynos5420.h | 27 +++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

Comments

Chanwoo Choi July 16, 2019, 9:49 a.m. UTC | #1 
Hi,

Usually, when developing the clock controller driver,
define the same sequence between the definition sequence in dt-bibing
and clock driver. As I replied, if you squash patches, it is easy.

For example,
This series add clock id as following.
                                                                             
 569         MUX(CLK_MOUT_ACLK400_ISP, "mout_aclk400_isp", mout_group1_p,            
 570                         SRC_TOP0, 0, 2),                                        
 571         MUX(CLK_MOUT_ACLK400_MSCL, "mout_aclk400_mscl", mout_group1_p,          
 572                         SRC_TOP0, 4, 2),                                        
 573         MUX(CLK_MOUT_ACLK400_WCORE, "mout_aclk400_wcore", mout_group1_p,        
 574                         SRC_TOP0, 16, 2),                                       
 575         MUX(CLK_MOUT_ACLK100_NOC, "mout_aclk100_noc", mout_group1_p,            
 576                         SRC_TOP0, 20, 2),          

In case of this code, you can define the IDs as following sequentially:

#define CLK_MOUT_ACLK400_ISP ...
#define CLK_MOUT_ACLK400_MSCL ... 
#define CLK_MOUT_ACLK400_WCORE ...
#define CLK_MOUT_ACLK100_NOC ...


But, this series define the ID as following:
	#define CLK_MOUT_ACLK400_WCORE          662                                     
#define CLK_MOUT_SCLK_DPLL      663                                             
	#define CLK_MOUT_ACLK100_NOC    664                                             
#define CLK_MOUT_ACLK200_FSYS2  665                                             
#define CLK_MOUT_PCLK200_FSYS   666                                             
#define CLK_MOUT_ACLK200_FSYS   667                                             
	#define CLK_MOUT_ACLK400_ISP    668                                             
	#define CLK_MOUT_ACLK400_MSCL   669                                             
#define CLK_MOUT_SCLK_MPLL      700                                             
#define CLK_MOUT_ACLK266        701                                             
#define CLK_MOUT_UART0          702                                             
#define CLK_MOUT_UART1          703                                             
#define CLK_MOUT_UART2          704                                             
#define CLK_MOUT_UART3          7

On 19. 7. 15. 오후 9:43, Lukasz Luba wrote:
> There is a need of new IDs which will be used for modeling proper hierarchy
> in the Exynos54xx SoCs. Previous implementation rely on bootloader
> settings, which are not configuring properly some clocks.
> These IDs provide interface to set proper parents.
> 
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
>  include/dt-bindings/clock/exynos5420.h | 27 +++++++++++++++++++++++++-
>  1 file changed, 26 insertions(+), 1 deletion(-)
> 
> diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
> index 02d5ac469a3d..c37a28eeaf7e 100644
> --- a/include/dt-bindings/clock/exynos5420.h
> +++ b/include/dt-bindings/clock/exynos5420.h
> @@ -230,6 +230,30 @@
>  #define CLK_MOUT_USER_MAU_EPLL	659
>  #define CLK_MOUT_SCLK_SPLL	660
>  #define CLK_MOUT_MX_MSPLL_CCORE_PHY	661
> +#define CLK_MOUT_ACLK400_WCORE		662
> +#define CLK_MOUT_SCLK_DPLL	663
> +#define CLK_MOUT_ACLK100_NOC	664
> +#define CLK_MOUT_ACLK200_FSYS2	665
> +#define CLK_MOUT_PCLK200_FSYS	666
> +#define CLK_MOUT_ACLK200_FSYS	667
> +#define CLK_MOUT_ACLK400_ISP	668
> +#define CLK_MOUT_ACLK400_MSCL	669
> +#define CLK_MOUT_SCLK_MPLL	700
> +#define CLK_MOUT_ACLK266	701
> +#define CLK_MOUT_UART0		702
> +#define CLK_MOUT_UART1		703
> +#define CLK_MOUT_UART2		704
> +#define CLK_MOUT_UART3		705
> +#define CLK_MOUT_SCLK_CPLL	706
> +#define CLK_MOUT_PWM		707
> +#define CLK_MOUT_ACLK266_G2D		708
> +#define CLK_MOUT_SW_ACLK400_WCORE	709
> +#define CLK_MOUT_SW_ACLK400_MSCL	710
> +#define CLK_MOUT_SW_ACLK400_ISP		711
> +#define CLK_MOUT_SW_ACLK266_ISP		712
> +#define CLK_MOUT_USER_ACLK266_ISP	713
> +#define CLK_MOUT_ACLK266_ISP	714
> +#define CLK_MOUT_MMC0		715
>  
>  /* divider clocks */
>  #define CLK_DOUT_PIXEL		768
> @@ -264,8 +288,9 @@
>  #define CLK_FF_DOUT_SPLL2	797
>  #define CLK_DOUT_PCLK_DREX0	798
>  #define CLK_DOUT_PCLK_DREX1	799
> +#define CLK_DOUT_ACLK266_ISP	800
>  
>  /* must be greater than maximal clock id */
> -#define CLK_NR_CLKS		800
> +#define CLK_NR_CLKS		801
>  
>  #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5420_H */
>
Lukasz Luba July 18, 2019, 6:02 a.m. UTC | #2 
On 7/16/19 11:49 AM, Chanwoo Choi wrote:
> Hi,
> 
> Usually, when developing the clock controller driver,
> define the same sequence between the definition sequence in dt-bibing
> and clock driver. As I replied, if you squash patches, it is easy.
OK
> 
> For example,
> This series add clock id as following.
>                                                                               
>   569         MUX(CLK_MOUT_ACLK400_ISP, "mout_aclk400_isp", mout_group1_p,
>   570                         SRC_TOP0, 0, 2),
>   571         MUX(CLK_MOUT_ACLK400_MSCL, "mout_aclk400_mscl", mout_group1_p,
>   572                         SRC_TOP0, 4, 2),
>   573         MUX(CLK_MOUT_ACLK400_WCORE, "mout_aclk400_wcore", mout_group1_p,
>   574                         SRC_TOP0, 16, 2),
>   575         MUX(CLK_MOUT_ACLK100_NOC, "mout_aclk100_noc", mout_group1_p,
>   576                         SRC_TOP0, 20, 2),
> 
> In case of this code, you can define the IDs as following sequentially:
> 
> #define CLK_MOUT_ACLK400_ISP ...
> #define CLK_MOUT_ACLK400_MSCL ...
> #define CLK_MOUT_ACLK400_WCORE ...
> #define CLK_MOUT_ACLK100_NOC ...
> 
Thank you for this example. I will align them.

Regards,
Lukasz
> 
> But, this series define the ID as following:
> 	#define CLK_MOUT_ACLK400_WCORE          662
> #define CLK_MOUT_SCLK_DPLL      663
> 	#define CLK_MOUT_ACLK100_NOC    664
> #define CLK_MOUT_ACLK200_FSYS2  665
> #define CLK_MOUT_PCLK200_FSYS   666
> #define CLK_MOUT_ACLK200_FSYS   667
> 	#define CLK_MOUT_ACLK400_ISP    668
> 	#define CLK_MOUT_ACLK400_MSCL   669
> #define CLK_MOUT_SCLK_MPLL      700
> #define CLK_MOUT_ACLK266        701
> #define CLK_MOUT_UART0          702
> #define CLK_MOUT_UART1          703
> #define CLK_MOUT_UART2          704
> #define CLK_MOUT_UART3          7
> 
> On 19. 7. 15. 오후 9:43, Lukasz Luba wrote:
>> There is a need of new IDs which will be used for modeling proper hierarchy
>> in the Exynos54xx SoCs. Previous implementation rely on bootloader
>> settings, which are not configuring properly some clocks.
>> These IDs provide interface to set proper parents.
>>
>> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
>> ---
>>   include/dt-bindings/clock/exynos5420.h | 27 +++++++++++++++++++++++++-
>>   1 file changed, 26 insertions(+), 1 deletion(-)
>>
>> diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
>> index 02d5ac469a3d..c37a28eeaf7e 100644
>> --- a/include/dt-bindings/clock/exynos5420.h
>> +++ b/include/dt-bindings/clock/exynos5420.h
>> @@ -230,6 +230,30 @@
>>   #define CLK_MOUT_USER_MAU_EPLL	659
>>   #define CLK_MOUT_SCLK_SPLL	660
>>   #define CLK_MOUT_MX_MSPLL_CCORE_PHY	661
>> +#define CLK_MOUT_ACLK400_WCORE		662
>> +#define CLK_MOUT_SCLK_DPLL	663
>> +#define CLK_MOUT_ACLK100_NOC	664
>> +#define CLK_MOUT_ACLK200_FSYS2	665
>> +#define CLK_MOUT_PCLK200_FSYS	666
>> +#define CLK_MOUT_ACLK200_FSYS	667
>> +#define CLK_MOUT_ACLK400_ISP	668
>> +#define CLK_MOUT_ACLK400_MSCL	669
>> +#define CLK_MOUT_SCLK_MPLL	700
>> +#define CLK_MOUT_ACLK266	701
>> +#define CLK_MOUT_UART0		702
>> +#define CLK_MOUT_UART1		703
>> +#define CLK_MOUT_UART2		704
>> +#define CLK_MOUT_UART3		705
>> +#define CLK_MOUT_SCLK_CPLL	706
>> +#define CLK_MOUT_PWM		707
>> +#define CLK_MOUT_ACLK266_G2D		708
>> +#define CLK_MOUT_SW_ACLK400_WCORE	709
>> +#define CLK_MOUT_SW_ACLK400_MSCL	710
>> +#define CLK_MOUT_SW_ACLK400_ISP		711
>> +#define CLK_MOUT_SW_ACLK266_ISP		712
>> +#define CLK_MOUT_USER_ACLK266_ISP	713
>> +#define CLK_MOUT_ACLK266_ISP	714
>> +#define CLK_MOUT_MMC0		715
>>   
>>   /* divider clocks */
>>   #define CLK_DOUT_PIXEL		768
>> @@ -264,8 +288,9 @@
>>   #define CLK_FF_DOUT_SPLL2	797
>>   #define CLK_DOUT_PCLK_DREX0	798
>>   #define CLK_DOUT_PCLK_DREX1	799
>> +#define CLK_DOUT_ACLK266_ISP	800
>>   
>>   /* must be greater than maximal clock id */
>> -#define CLK_NR_CLKS		800
>> +#define CLK_NR_CLKS		801
>>   
>>   #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5420_H */
>>
> 
>
diff mbox series

Patch

diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
index 02d5ac469a3d..c37a28eeaf7e 100644
--- a/include/dt-bindings/clock/exynos5420.h
+++ b/include/dt-bindings/clock/exynos5420.h
@@ -230,6 +230,30 @@ 
 #define CLK_MOUT_USER_MAU_EPLL	659
 #define CLK_MOUT_SCLK_SPLL	660
 #define CLK_MOUT_MX_MSPLL_CCORE_PHY	661
+#define CLK_MOUT_ACLK400_WCORE		662
+#define CLK_MOUT_SCLK_DPLL	663
+#define CLK_MOUT_ACLK100_NOC	664
+#define CLK_MOUT_ACLK200_FSYS2	665
+#define CLK_MOUT_PCLK200_FSYS	666
+#define CLK_MOUT_ACLK200_FSYS	667
+#define CLK_MOUT_ACLK400_ISP	668
+#define CLK_MOUT_ACLK400_MSCL	669
+#define CLK_MOUT_SCLK_MPLL	700
+#define CLK_MOUT_ACLK266	701
+#define CLK_MOUT_UART0		702
+#define CLK_MOUT_UART1		703
+#define CLK_MOUT_UART2		704
+#define CLK_MOUT_UART3		705
+#define CLK_MOUT_SCLK_CPLL	706
+#define CLK_MOUT_PWM		707
+#define CLK_MOUT_ACLK266_G2D		708
+#define CLK_MOUT_SW_ACLK400_WCORE	709
+#define CLK_MOUT_SW_ACLK400_MSCL	710
+#define CLK_MOUT_SW_ACLK400_ISP		711
+#define CLK_MOUT_SW_ACLK266_ISP		712
+#define CLK_MOUT_USER_ACLK266_ISP	713
+#define CLK_MOUT_ACLK266_ISP	714
+#define CLK_MOUT_MMC0		715
 
 /* divider clocks */
 #define CLK_DOUT_PIXEL		768
@@ -264,8 +288,9 @@ 
 #define CLK_FF_DOUT_SPLL2	797
 #define CLK_DOUT_PCLK_DREX0	798
 #define CLK_DOUT_PCLK_DREX1	799
+#define CLK_DOUT_ACLK266_ISP	800
 
 /* must be greater than maximal clock id */
-#define CLK_NR_CLKS		800
+#define CLK_NR_CLKS		801
 
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5420_H */