@@ -12,13 +12,11 @@ Required properties:
- interrupts: interrupt number to the cpu.
- clocks: from common clock binding: handle to usb clock.
- clock-names: from common clock binding: Shall be "usbhost".
- - port: if in the SoC there are EHCI phys, they should be listed here.
- One phy per port. Each port should have following entries:
- - reg: port number on EHCI controller, e.g
- On Exynos5250, port 0 is USB2.0 otg phy
- port 1 is HSIC phy0
- port 2 is HSIC phy1
- - phys: from the *Generic PHY* bindings; specifying phy used by port.
+ - phys: from the *Generic PHY* bindings; array specifying phy(s) used
+ by the root port.
+ - phy-names: from the *Generic PHY* bindings; array of the names for
+ each phy for the root ports, must be a subset of the following:
+ "host", "hsic0", "hsic1".
Optional properties:
- samsung,vbus-gpio: if present, specifies the GPIO that
@@ -35,12 +33,8 @@ Example:
clocks = <&clock 285>;
clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2phy 1>;
- };
+ phys = <&usb2phy 1>;
+ phy-names = "host";
};
OHCI
@@ -52,13 +46,11 @@ Required properties:
- interrupts: interrupt number to the cpu.
- clocks: from common clock binding: handle to usb clock.
- clock-names: from common clock binding: Shall be "usbhost".
- - port: if in the SoC there are OHCI phys, they should be listed here.
- One phy per port. Each port should have following entries:
- - reg: port number on OHCI controller, e.g
- On Exynos5250, port 0 is USB2.0 otg phy
- port 1 is HSIC phy0
- port 2 is HSIC phy1
- - phys: from the *Generic PHY* bindings, specifying phy used by port.
+ - phys: from the *Generic PHY* bindings; array specifying phy(s) used
+ by the root port.
+ - phy-names: from the *Generic PHY* bindings; array of the names for
+ each phy for the root ports, must be a subset of the following:
+ "host", "hsic0", "hsic1".
Example:
usb@12120000 {
@@ -69,13 +61,8 @@ Example:
clocks = <&clock 285>;
clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2phy 1>;
- };
-
+ phys = <&usb2phy 1>;
+ phy-names = "host";
};
DWC3
Commit 69bec7259853 ("USB: core: let USB device know device node") added support for attaching devicetree node for USB devices. Those nodes are children of their USB host controller. However Exynos EHCI and OHCI driver bindings already define child-nodes for each physical root hub port and assigns respective PHY controller and parameters to them. This leads to the conflict. A workaround for it has been merged as commit 01d4071486fe ("usb: exynos: add workaround for the USB device bindings conflict"), but it disabled support for USB device binding for Exynos EHCI/OHCI controllers. To resolve it properly, lets move PHYs from the sub-nodes to a standard array under the 'phys' property. Suggested-by: Måns Rullgård <mans@mansr.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- .../devicetree/bindings/usb/exynos-usb.txt | 41 +++++++------------ 1 file changed, 14 insertions(+), 27 deletions(-)