diff mbox series

[v1,11/16] drm/panel: move drm_panel functions to .c file

Message ID 20190804201637.1240-12-sam@ravnborg.org (mailing list archive)
State Not Applicable
Headers show
Series drm: panel related updates | expand

Commit Message

Sam Ravnborg Aug. 4, 2019, 8:16 p.m. UTC
Move inline functions from include/drm/drm_panel.h to drm_panel.c.
This is in preparation for follow-up patches that will add extra
logic to the functions.
As they are no longer static inline, EXPORT them.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
---
 drivers/gpu/drm/drm_panel.c | 96 +++++++++++++++++++++++++++++++++++
 include/drm/drm_panel.h     | 99 +++----------------------------------
 2 files changed, 104 insertions(+), 91 deletions(-)

Comments

Laurent Pinchart Aug. 5, 2019, 10:45 a.m. UTC | #1
Hi Sam,

Thank you for the patch.

On Sun, Aug 04, 2019 at 10:16:32PM +0200, Sam Ravnborg wrote:
> Move inline functions from include/drm/drm_panel.h to drm_panel.c.
> This is in preparation for follow-up patches that will add extra
> logic to the functions.
> As they are no longer static inline, EXPORT them.
> 
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <maxime.ripard@bootlin.com>
> Cc: Sean Paul <sean@poorly.run>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> ---
>  drivers/gpu/drm/drm_panel.c | 96 +++++++++++++++++++++++++++++++++++
>  include/drm/drm_panel.h     | 99 +++----------------------------------
>  2 files changed, 104 insertions(+), 91 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> index dbd5b873e8f2..9946b8d9bacc 100644
> --- a/drivers/gpu/drm/drm_panel.c
> +++ b/drivers/gpu/drm/drm_panel.c
> @@ -54,6 +54,102 @@ void drm_panel_init(struct drm_panel *panel)
>  }
>  EXPORT_SYMBOL(drm_panel_init);
>  
> +/**
> + * drm_panel_prepare - power on a panel
> + * @panel: DRM panel
> + *
> + * Calling this function will enable power and deassert any reset signals to
> + * the panel. After this has completed it is possible to communicate with any
> + * integrated circuitry via a command bus.
> + *
> + * Return: 0 on success or a negative error code on failure.
> + */
> +int drm_panel_prepare(struct drm_panel *panel)
> +{
> +	if (panel && panel->funcs && panel->funcs->prepare)
> +		return panel->funcs->prepare(panel);
> +
> +	return panel ? -ENOSYS : -EINVAL;
> +}
> +EXPORT_SYMBOL(drm_panel_prepare);
> +
> +/**
> + * drm_panel_enable - enable a panel
> + * @panel: DRM panel
> + *
> + * Calling this function will cause the panel display drivers to be turned on
> + * and the backlight to be enabled. Content will be visible on screen after
> + * this call completes.
> + *
> + * Return: 0 on success or a negative error code on failure.
> + */
> +int drm_panel_enable(struct drm_panel *panel)
> +{
> +	if (panel && panel->funcs && panel->funcs->enable)
> +		return panel->funcs->enable(panel);
> +
> +	return panel ? -ENOSYS : -EINVAL;
> +}
> +EXPORT_SYMBOL(drm_panel_enable);
> +
> +/**
> + * drm_panel_disable - disable a panel
> + * @panel: DRM panel
> + *
> + * This will typically turn off the panel's backlight or disable the display
> + * drivers. For smart panels it should still be possible to communicate with
> + * the integrated circuitry via any command bus after this call.
> + *
> + * Return: 0 on success or a negative error code on failure.
> + */
> +int drm_panel_disable(struct drm_panel *panel)
> +{
> +	if (panel && panel->funcs && panel->funcs->disable)
> +		return panel->funcs->disable(panel);
> +
> +	return panel ? -ENOSYS : -EINVAL;
> +}
> +EXPORT_SYMBOL(drm_panel_disable);
> +
> +/**
> + * drm_panel_unprepare - power off a panel
> + * @panel: DRM panel
> + *
> + * Calling this function will completely power off a panel (assert the panel's
> + * reset, turn off power supplies, ...). After this function has completed, it
> + * is usually no longer possible to communicate with the panel until another
> + * call to drm_panel_prepare().
> + *
> + * Return: 0 on success or a negative error code on failure.
> + */
> +int drm_panel_unprepare(struct drm_panel *panel)
> +{
> +	if (panel && panel->funcs && panel->funcs->unprepare)
> +		return panel->funcs->unprepare(panel);
> +
> +	return panel ? -ENOSYS : -EINVAL;
> +}
> +EXPORT_SYMBOL(drm_panel_unprepare);
> +
> +/**
> + * drm_panel_get_modes - probe the available display modes of a panel
> + * @panel: DRM panel
> + *
> + * The modes probed from the panel are automatically added to the connector
> + * that the panel is attached to.
> + *
> + * Return: The number of modes available from the panel on success or a
> + * negative error code on failure.
> + */
> +int drm_panel_get_modes(struct drm_panel *panel)
> +{
> +	if (panel && panel->funcs && panel->funcs->get_modes)
> +		return panel->funcs->get_modes(panel);
> +
> +	return panel ? -ENOSYS : -EINVAL;
> +}
> +EXPORT_SYMBOL(drm_panel_get_modes);
> +
>  /**
>   * drm_panel_add - add a panel to the global registry
>   * @panel: panel to add
> diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> index 26377836141c..053d611656b9 100644
> --- a/include/drm/drm_panel.h
> +++ b/include/drm/drm_panel.h
> @@ -97,97 +97,6 @@ struct drm_panel {
>  	struct list_head list;
>  };
>  
> -/**
> - * drm_disable_unprepare - power off a panel
> - * @panel: DRM panel
> - *
> - * Calling this function will completely power off a panel (assert the panel's
> - * reset, turn off power supplies, ...). After this function has completed, it
> - * is usually no longer possible to communicate with the panel until another
> - * call to drm_panel_prepare().
> - *
> - * Return: 0 on success or a negative error code on failure.
> - */
> -static inline int drm_panel_unprepare(struct drm_panel *panel)
> -{
> -	if (panel && panel->funcs && panel->funcs->unprepare)
> -		return panel->funcs->unprepare(panel);
> -
> -	return panel ? -ENOSYS : -EINVAL;
> -}
> -
> -/**
> - * drm_panel_disable - disable a panel
> - * @panel: DRM panel
> - *
> - * This will typically turn off the panel's backlight or disable the display
> - * drivers. For smart panels it should still be possible to communicate with
> - * the integrated circuitry via any command bus after this call.
> - *
> - * Return: 0 on success or a negative error code on failure.
> - */
> -static inline int drm_panel_disable(struct drm_panel *panel)
> -{
> -	if (panel && panel->funcs && panel->funcs->disable)
> -		return panel->funcs->disable(panel);
> -
> -	return panel ? -ENOSYS : -EINVAL;
> -}
> -
> -/**
> - * drm_panel_prepare - power on a panel
> - * @panel: DRM panel
> - *
> - * Calling this function will enable power and deassert any reset signals to
> - * the panel. After this has completed it is possible to communicate with any
> - * integrated circuitry via a command bus.
> - *
> - * Return: 0 on success or a negative error code on failure.
> - */
> -static inline int drm_panel_prepare(struct drm_panel *panel)
> -{
> -	if (panel && panel->funcs && panel->funcs->prepare)
> -		return panel->funcs->prepare(panel);
> -
> -	return panel ? -ENOSYS : -EINVAL;
> -}
> -
> -/**
> - * drm_panel_enable - enable a panel
> - * @panel: DRM panel
> - *
> - * Calling this function will cause the panel display drivers to be turned on
> - * and the backlight to be enabled. Content will be visible on screen after
> - * this call completes.
> - *
> - * Return: 0 on success or a negative error code on failure.
> - */
> -static inline int drm_panel_enable(struct drm_panel *panel)
> -{
> -	if (panel && panel->funcs && panel->funcs->enable)
> -		return panel->funcs->enable(panel);
> -
> -	return panel ? -ENOSYS : -EINVAL;
> -}
> -
> -/**
> - * drm_panel_get_modes - probe the available display modes of a panel
> - * @panel: DRM panel
> - *
> - * The modes probed from the panel are automatically added to the connector
> - * that the panel is attached to.
> - *
> - * Return: The number of modes available from the panel on success or a
> - * negative error code on failure.
> - */
> -static inline int drm_panel_get_modes(struct drm_panel *panel)
> -{
> -	if (panel && panel->funcs && panel->funcs->get_modes)
> -		return panel->funcs->get_modes(panel);
> -
> -	return panel ? -ENOSYS : -EINVAL;
> -}
> -
>  void drm_panel_init(struct drm_panel *panel);
>  
>  int drm_panel_add(struct drm_panel *panel);
> @@ -196,6 +105,14 @@ void drm_panel_remove(struct drm_panel *panel);
>  int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector);
>  int drm_panel_detach(struct drm_panel *panel);
>  
> +int drm_panel_prepare(struct drm_panel *panel);
> +int drm_panel_unprepare(struct drm_panel *panel);
> +
> +int drm_panel_enable(struct drm_panel *panel);
> +int drm_panel_disable(struct drm_panel *panel);

Nitpicking, I would keep the order of the declarations aligned with the
definitions. prepare - enable - disable - unprepare and prepare -
unprepare - enable - disable are both fine with me, as long as they're
consistent.

Apart from that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +
> +int drm_panel_get_modes(struct drm_panel *panel);
> +
>  #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
>  struct drm_panel *of_drm_find_panel(const struct device_node *np);
>  #else
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index dbd5b873e8f2..9946b8d9bacc 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -54,6 +54,102 @@  void drm_panel_init(struct drm_panel *panel)
 }
 EXPORT_SYMBOL(drm_panel_init);
 
+/**
+ * drm_panel_prepare - power on a panel
+ * @panel: DRM panel
+ *
+ * Calling this function will enable power and deassert any reset signals to
+ * the panel. After this has completed it is possible to communicate with any
+ * integrated circuitry via a command bus.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int drm_panel_prepare(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->prepare)
+		return panel->funcs->prepare(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_prepare);
+
+/**
+ * drm_panel_enable - enable a panel
+ * @panel: DRM panel
+ *
+ * Calling this function will cause the panel display drivers to be turned on
+ * and the backlight to be enabled. Content will be visible on screen after
+ * this call completes.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int drm_panel_enable(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->enable)
+		return panel->funcs->enable(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_enable);
+
+/**
+ * drm_panel_disable - disable a panel
+ * @panel: DRM panel
+ *
+ * This will typically turn off the panel's backlight or disable the display
+ * drivers. For smart panels it should still be possible to communicate with
+ * the integrated circuitry via any command bus after this call.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int drm_panel_disable(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->disable)
+		return panel->funcs->disable(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_disable);
+
+/**
+ * drm_panel_unprepare - power off a panel
+ * @panel: DRM panel
+ *
+ * Calling this function will completely power off a panel (assert the panel's
+ * reset, turn off power supplies, ...). After this function has completed, it
+ * is usually no longer possible to communicate with the panel until another
+ * call to drm_panel_prepare().
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int drm_panel_unprepare(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->unprepare)
+		return panel->funcs->unprepare(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_unprepare);
+
+/**
+ * drm_panel_get_modes - probe the available display modes of a panel
+ * @panel: DRM panel
+ *
+ * The modes probed from the panel are automatically added to the connector
+ * that the panel is attached to.
+ *
+ * Return: The number of modes available from the panel on success or a
+ * negative error code on failure.
+ */
+int drm_panel_get_modes(struct drm_panel *panel)
+{
+	if (panel && panel->funcs && panel->funcs->get_modes)
+		return panel->funcs->get_modes(panel);
+
+	return panel ? -ENOSYS : -EINVAL;
+}
+EXPORT_SYMBOL(drm_panel_get_modes);
+
 /**
  * drm_panel_add - add a panel to the global registry
  * @panel: panel to add
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 26377836141c..053d611656b9 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -97,97 +97,6 @@  struct drm_panel {
 	struct list_head list;
 };
 
-/**
- * drm_disable_unprepare - power off a panel
- * @panel: DRM panel
- *
- * Calling this function will completely power off a panel (assert the panel's
- * reset, turn off power supplies, ...). After this function has completed, it
- * is usually no longer possible to communicate with the panel until another
- * call to drm_panel_prepare().
- *
- * Return: 0 on success or a negative error code on failure.
- */
-static inline int drm_panel_unprepare(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->unprepare)
-		return panel->funcs->unprepare(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
-/**
- * drm_panel_disable - disable a panel
- * @panel: DRM panel
- *
- * This will typically turn off the panel's backlight or disable the display
- * drivers. For smart panels it should still be possible to communicate with
- * the integrated circuitry via any command bus after this call.
- *
- * Return: 0 on success or a negative error code on failure.
- */
-static inline int drm_panel_disable(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->disable)
-		return panel->funcs->disable(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
-/**
- * drm_panel_prepare - power on a panel
- * @panel: DRM panel
- *
- * Calling this function will enable power and deassert any reset signals to
- * the panel. After this has completed it is possible to communicate with any
- * integrated circuitry via a command bus.
- *
- * Return: 0 on success or a negative error code on failure.
- */
-static inline int drm_panel_prepare(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->prepare)
-		return panel->funcs->prepare(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
-/**
- * drm_panel_enable - enable a panel
- * @panel: DRM panel
- *
- * Calling this function will cause the panel display drivers to be turned on
- * and the backlight to be enabled. Content will be visible on screen after
- * this call completes.
- *
- * Return: 0 on success or a negative error code on failure.
- */
-static inline int drm_panel_enable(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->enable)
-		return panel->funcs->enable(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
-/**
- * drm_panel_get_modes - probe the available display modes of a panel
- * @panel: DRM panel
- *
- * The modes probed from the panel are automatically added to the connector
- * that the panel is attached to.
- *
- * Return: The number of modes available from the panel on success or a
- * negative error code on failure.
- */
-static inline int drm_panel_get_modes(struct drm_panel *panel)
-{
-	if (panel && panel->funcs && panel->funcs->get_modes)
-		return panel->funcs->get_modes(panel);
-
-	return panel ? -ENOSYS : -EINVAL;
-}
-
 void drm_panel_init(struct drm_panel *panel);
 
 int drm_panel_add(struct drm_panel *panel);
@@ -196,6 +105,14 @@  void drm_panel_remove(struct drm_panel *panel);
 int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector);
 int drm_panel_detach(struct drm_panel *panel);
 
+int drm_panel_prepare(struct drm_panel *panel);
+int drm_panel_unprepare(struct drm_panel *panel);
+
+int drm_panel_enable(struct drm_panel *panel);
+int drm_panel_disable(struct drm_panel *panel);
+
+int drm_panel_get_modes(struct drm_panel *panel);
+
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
 #else