diff mbox series

[RFT,v2] xhci: Fix memory leak when caching protocol extended capability PSI tables

Message ID 20200211150158.14475-1-mathias.nyman@linux.intel.com (mailing list archive)
State Not Applicable
Headers show
Series [RFT,v2] xhci: Fix memory leak when caching protocol extended capability PSI tables | expand

Commit Message

Mathias Nyman Feb. 11, 2020, 3:01 p.m. UTC
xhci driver assumed that xHC controllers have at most one custom
supported speed table (PSI) for all usb 3.x ports.
Memory was allocated for one PSI table under the xhci hub structure.

Turns out this is not the case, some controllers have a separate
"supported protocol capability" entry with a PSI table for each port.
This means each usb3 roothub port can in theory support different custom
speeds.

To solve this, cache all supported protocol capabilities with their PSI
tables in an array, and add pointers to the xhci port structure so that
every port points to its capability entry in the array.

When creating the SuperSpeedPlus USB Device Capability BOS descriptor
for the xhci USB 3.1 roothub we for now will use only data from the
first USB 3.1 capable protocol capability entry in the array.
This could be improved later, this patch focuses resolving
the memory leak.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
Cc: stable <stable@vger.kernel.org> # v4.4+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---

Changes since v1:

- Clear xhci->num_port_caps in xhci_mem_cleanup()
  Otherwise we fail to add new ports and cause NULL pointer dereference at
  manual xhci re-initialization. This can happen at resume if host lost power
  during suspend.
---
 drivers/usb/host/xhci-hub.c | 25 +++++++++++-----
 drivers/usb/host/xhci-mem.c | 59 +++++++++++++++++++++++--------------
 drivers/usb/host/xhci.h     | 14 +++++++--
 3 files changed, 65 insertions(+), 33 deletions(-)

Comments

Marek Szyprowski Feb. 11, 2020, 3:12 p.m. UTC | #1
Hi Mathias,

On 11.02.2020 16:01, Mathias Nyman wrote:
> xhci driver assumed that xHC controllers have at most one custom
> supported speed table (PSI) for all usb 3.x ports.
> Memory was allocated for one PSI table under the xhci hub structure.
>
> Turns out this is not the case, some controllers have a separate
> "supported protocol capability" entry with a PSI table for each port.
> This means each usb3 roothub port can in theory support different custom
> speeds.
>
> To solve this, cache all supported protocol capabilities with their PSI
> tables in an array, and add pointers to the xhci port structure so that
> every port points to its capability entry in the array.
>
> When creating the SuperSpeedPlus USB Device Capability BOS descriptor
> for the xhci USB 3.1 roothub we for now will use only data from the
> first USB 3.1 capable protocol capability entry in the array.
> This could be improved later, this patch focuses resolving
> the memory leak.
>
> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
> Cc: stable <stable@vger.kernel.org> # v4.4+
> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

> ---
>
> Changes since v1:
>
> - Clear xhci->num_port_caps in xhci_mem_cleanup()
>    Otherwise we fail to add new ports and cause NULL pointer dereference at
>    manual xhci re-initialization. This can happen at resume if host lost power
>    during suspend.
> ---
>   drivers/usb/host/xhci-hub.c | 25 +++++++++++-----
>   drivers/usb/host/xhci-mem.c | 59 +++++++++++++++++++++++--------------
>   drivers/usb/host/xhci.h     | 14 +++++++--
>   3 files changed, 65 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> index 7a3a29e5e9d2..af92b2576fe9 100644
> --- a/drivers/usb/host/xhci-hub.c
> +++ b/drivers/usb/host/xhci-hub.c
> @@ -55,6 +55,7 @@ static u8 usb_bos_descriptor [] = {
>   static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
>   				     u16 wLength)
>   {
> +	struct xhci_port_cap *port_cap = NULL;
>   	int i, ssa_count;
>   	u32 temp;
>   	u16 desc_size, ssp_cap_size, ssa_size = 0;
> @@ -64,16 +65,24 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
>   	ssp_cap_size = sizeof(usb_bos_descriptor) - desc_size;
>   
>   	/* does xhci support USB 3.1 Enhanced SuperSpeed */
> -	if (xhci->usb3_rhub.min_rev >= 0x01) {
> +	for (i = 0; i < xhci->num_port_caps; i++) {
> +		if (xhci->port_caps[i].maj_rev == 0x03 &&
> +		    xhci->port_caps[i].min_rev >= 0x01) {
> +			usb3_1 = true;
> +			port_cap = &xhci->port_caps[i];
> +			break;
> +		}
> +	}
> +
> +	if (usb3_1) {
>   		/* does xhci provide a PSI table for SSA speed attributes? */
> -		if (xhci->usb3_rhub.psi_count) {
> +		if (port_cap->psi_count) {
>   			/* two SSA entries for each unique PSI ID, RX and TX */
> -			ssa_count = xhci->usb3_rhub.psi_uid_count * 2;
> +			ssa_count = port_cap->psi_uid_count * 2;
>   			ssa_size = ssa_count * sizeof(u32);
>   			ssp_cap_size -= 16; /* skip copying the default SSA */
>   		}
>   		desc_size += ssp_cap_size;
> -		usb3_1 = true;
>   	}
>   	memcpy(buf, &usb_bos_descriptor, min(desc_size, wLength));
>   
> @@ -99,7 +108,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
>   	}
>   
>   	/* If PSI table exists, add the custom speed attributes from it */
> -	if (usb3_1 && xhci->usb3_rhub.psi_count) {
> +	if (usb3_1 && port_cap->psi_count) {
>   		u32 ssp_cap_base, bm_attrib, psi, psi_mant, psi_exp;
>   		int offset;
>   
> @@ -111,7 +120,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
>   
>   		/* attribute count SSAC bits 4:0 and ID count SSIC bits 8:5 */
>   		bm_attrib = (ssa_count - 1) & 0x1f;
> -		bm_attrib |= (xhci->usb3_rhub.psi_uid_count - 1) << 5;
> +		bm_attrib |= (port_cap->psi_uid_count - 1) << 5;
>   		put_unaligned_le32(bm_attrib, &buf[ssp_cap_base + 4]);
>   
>   		if (wLength < desc_size + ssa_size)
> @@ -124,8 +133,8 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
>   		 * USB 3.1 requires two SSA entries (RX and TX) for every link
>   		 */
>   		offset = desc_size;
> -		for (i = 0; i < xhci->usb3_rhub.psi_count; i++) {
> -			psi = xhci->usb3_rhub.psi[i];
> +		for (i = 0; i < port_cap->psi_count; i++) {
> +			psi = port_cap->psi[i];
>   			psi &= ~USB_SSP_SUBLINK_SPEED_RSVD;
>   			psi_exp = XHCI_EXT_PORT_PSIE(psi);
>   			psi_mant = XHCI_EXT_PORT_PSIM(psi);
> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
> index 0e2701649369..884c601bfa15 100644
> --- a/drivers/usb/host/xhci-mem.c
> +++ b/drivers/usb/host/xhci-mem.c
> @@ -1915,17 +1915,17 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
>   	xhci->usb3_rhub.num_ports = 0;
>   	xhci->num_active_eps = 0;
>   	kfree(xhci->usb2_rhub.ports);
> -	kfree(xhci->usb2_rhub.psi);
>   	kfree(xhci->usb3_rhub.ports);
> -	kfree(xhci->usb3_rhub.psi);
>   	kfree(xhci->hw_ports);
>   	kfree(xhci->rh_bw);
>   	kfree(xhci->ext_caps);
> +	for (i = 0; i < xhci->num_port_caps; i++)
> +		kfree(xhci->port_caps[i].psi);
> +	kfree(xhci->port_caps);
> +	xhci->num_port_caps = 0;
>   
>   	xhci->usb2_rhub.ports = NULL;
> -	xhci->usb2_rhub.psi = NULL;
>   	xhci->usb3_rhub.ports = NULL;
> -	xhci->usb3_rhub.psi = NULL;
>   	xhci->hw_ports = NULL;
>   	xhci->rh_bw = NULL;
>   	xhci->ext_caps = NULL;
> @@ -2126,6 +2126,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
>   	u8 major_revision, minor_revision;
>   	struct xhci_hub *rhub;
>   	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
> +	struct xhci_port_cap *port_cap;
>   
>   	temp = readl(addr);
>   	major_revision = XHCI_EXT_PORT_MAJOR(temp);
> @@ -2160,31 +2161,39 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
>   		/* WTF? "Valid values are ‘1’ to MaxPorts" */
>   		return;
>   
> -	rhub->psi_count = XHCI_EXT_PORT_PSIC(temp);
> -	if (rhub->psi_count) {
> -		rhub->psi = kcalloc_node(rhub->psi_count, sizeof(*rhub->psi),
> -				    GFP_KERNEL, dev_to_node(dev));
> -		if (!rhub->psi)
> -			rhub->psi_count = 0;
> +	port_cap = &xhci->port_caps[xhci->num_port_caps++];
> +	if (xhci->num_port_caps > max_caps)
> +		return;
> +
> +	port_cap->maj_rev = major_revision;
> +	port_cap->min_rev = minor_revision;
> +	port_cap->psi_count = XHCI_EXT_PORT_PSIC(temp);
> +
> +	if (port_cap->psi_count) {
> +		port_cap->psi = kcalloc_node(port_cap->psi_count,
> +					     sizeof(*port_cap->psi),
> +					     GFP_KERNEL, dev_to_node(dev));
> +		if (!port_cap->psi)
> +			port_cap->psi_count = 0;
>   
> -		rhub->psi_uid_count++;
> -		for (i = 0; i < rhub->psi_count; i++) {
> -			rhub->psi[i] = readl(addr + 4 + i);
> +		port_cap->psi_uid_count++;
> +		for (i = 0; i < port_cap->psi_count; i++) {
> +			port_cap->psi[i] = readl(addr + 4 + i);
>   
>   			/* count unique ID values, two consecutive entries can
>   			 * have the same ID if link is assymetric
>   			 */
> -			if (i && (XHCI_EXT_PORT_PSIV(rhub->psi[i]) !=
> -				  XHCI_EXT_PORT_PSIV(rhub->psi[i - 1])))
> -				rhub->psi_uid_count++;
> +			if (i && (XHCI_EXT_PORT_PSIV(port_cap->psi[i]) !=
> +				  XHCI_EXT_PORT_PSIV(port_cap->psi[i - 1])))
> +				port_cap->psi_uid_count++;
>   
>   			xhci_dbg(xhci, "PSIV:%d PSIE:%d PLT:%d PFD:%d LP:%d PSIM:%d\n",
> -				  XHCI_EXT_PORT_PSIV(rhub->psi[i]),
> -				  XHCI_EXT_PORT_PSIE(rhub->psi[i]),
> -				  XHCI_EXT_PORT_PLT(rhub->psi[i]),
> -				  XHCI_EXT_PORT_PFD(rhub->psi[i]),
> -				  XHCI_EXT_PORT_LP(rhub->psi[i]),
> -				  XHCI_EXT_PORT_PSIM(rhub->psi[i]));
> +				  XHCI_EXT_PORT_PSIV(port_cap->psi[i]),
> +				  XHCI_EXT_PORT_PSIE(port_cap->psi[i]),
> +				  XHCI_EXT_PORT_PLT(port_cap->psi[i]),
> +				  XHCI_EXT_PORT_PFD(port_cap->psi[i]),
> +				  XHCI_EXT_PORT_LP(port_cap->psi[i]),
> +				  XHCI_EXT_PORT_PSIM(port_cap->psi[i]));
>   		}
>   	}
>   	/* cache usb2 port capabilities */
> @@ -2219,6 +2228,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
>   			continue;
>   		}
>   		hw_port->rhub = rhub;
> +		hw_port->port_cap = port_cap;
>   		rhub->num_ports++;
>   	}
>   	/* FIXME: Should we disable ports not in the Extended Capabilities? */
> @@ -2309,6 +2319,11 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
>   	if (!xhci->ext_caps)
>   		return -ENOMEM;
>   
> +	xhci->port_caps = kcalloc_node(cap_count, sizeof(*xhci->port_caps),
> +				flags, dev_to_node(dev));
> +	if (!xhci->port_caps)
> +		return -ENOMEM;
> +
>   	offset = cap_start;
>   
>   	while (offset) {
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 13d8838cd552..3ecee10fdcdc 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1702,12 +1702,20 @@ struct xhci_bus_state {
>    * Intel Lynx Point LP xHCI host.
>    */
>   #define	XHCI_MAX_REXIT_TIMEOUT_MS	20
> +struct xhci_port_cap {
> +	u32			*psi;	/* array of protocol speed ID entries */
> +	u8			psi_count;
> +	u8			psi_uid_count;
> +	u8			maj_rev;
> +	u8			min_rev;
> +};
>   
>   struct xhci_port {
>   	__le32 __iomem		*addr;
>   	int			hw_portnum;
>   	int			hcd_portnum;
>   	struct xhci_hub		*rhub;
> +	struct xhci_port_cap	*port_cap;
>   };
>   
>   struct xhci_hub {
> @@ -1719,9 +1727,6 @@ struct xhci_hub {
>   	/* supported prococol extended capabiliy values */
>   	u8			maj_rev;
>   	u8			min_rev;
> -	u32			*psi;	/* array of protocol speed ID entries */
> -	u8			psi_count;
> -	u8			psi_uid_count;
>   };
>   
>   /* There is one xhci_hcd structure per controller */
> @@ -1880,6 +1885,9 @@ struct xhci_hcd {
>   	/* cached usb2 extened protocol capabilites */
>   	u32                     *ext_caps;
>   	unsigned int            num_ext_caps;
> +	/* cached extended protocol port capabilities */
> +	struct xhci_port_cap	*port_caps;
> +	unsigned int		num_port_caps;
>   	/* Compliance Mode Recovery Data */
>   	struct timer_list	comp_mode_recovery_timer;
>   	u32			port_status_u0;

Best regards
Greg KH Feb. 11, 2020, 4:13 p.m. UTC | #2
On Tue, Feb 11, 2020 at 04:12:40PM +0100, Marek Szyprowski wrote:
> Hi Mathias,
> 
> On 11.02.2020 16:01, Mathias Nyman wrote:
> > xhci driver assumed that xHC controllers have at most one custom
> > supported speed table (PSI) for all usb 3.x ports.
> > Memory was allocated for one PSI table under the xhci hub structure.
> >
> > Turns out this is not the case, some controllers have a separate
> > "supported protocol capability" entry with a PSI table for each port.
> > This means each usb3 roothub port can in theory support different custom
> > speeds.
> >
> > To solve this, cache all supported protocol capabilities with their PSI
> > tables in an array, and add pointers to the xhci port structure so that
> > every port points to its capability entry in the array.
> >
> > When creating the SuperSpeedPlus USB Device Capability BOS descriptor
> > for the xhci USB 3.1 roothub we for now will use only data from the
> > first USB 3.1 capable protocol capability entry in the array.
> > This could be improved later, this patch focuses resolving
> > the memory leak.
> >
> > Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
> > Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
> > Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
> > Cc: stable <stable@vger.kernel.org> # v4.4+
> > Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
> 
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

Nice!

Should I revert the first and then apply this?

thanks,

greg k-h
Mathias Nyman Feb. 12, 2020, 9:01 a.m. UTC | #3
On 11.2.2020 18.13, Greg KH wrote:
> On Tue, Feb 11, 2020 at 04:12:40PM +0100, Marek Szyprowski wrote:
>> Hi Mathias,
>>
>> On 11.02.2020 16:01, Mathias Nyman wrote:
>>> xhci driver assumed that xHC controllers have at most one custom
>>> supported speed table (PSI) for all usb 3.x ports.
>>> Memory was allocated for one PSI table under the xhci hub structure.
>>>
>>> Turns out this is not the case, some controllers have a separate
>>> "supported protocol capability" entry with a PSI table for each port.
>>> This means each usb3 roothub port can in theory support different custom
>>> speeds.
>>>
>>> To solve this, cache all supported protocol capabilities with their PSI
>>> tables in an array, and add pointers to the xhci port structure so that
>>> every port points to its capability entry in the array.
>>>
>>> When creating the SuperSpeedPlus USB Device Capability BOS descriptor
>>> for the xhci USB 3.1 roothub we for now will use only data from the
>>> first USB 3.1 capable protocol capability entry in the array.
>>> This could be improved later, this patch focuses resolving
>>> the memory leak.
>>>
>>> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
>>> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
>>> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
>>> Cc: stable <stable@vger.kernel.org> # v4.4+
>>> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
>>
>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> 
> Nice!
> 
> Should I revert the first and then apply this?
> 

Yes, please

Thanks

-Mathias
Greg KH Feb. 12, 2020, 5:51 p.m. UTC | #4
On Wed, Feb 12, 2020 at 11:01:52AM +0200, Mathias Nyman wrote:
> On 11.2.2020 18.13, Greg KH wrote:
> > On Tue, Feb 11, 2020 at 04:12:40PM +0100, Marek Szyprowski wrote:
> >> Hi Mathias,
> >>
> >> On 11.02.2020 16:01, Mathias Nyman wrote:
> >>> xhci driver assumed that xHC controllers have at most one custom
> >>> supported speed table (PSI) for all usb 3.x ports.
> >>> Memory was allocated for one PSI table under the xhci hub structure.
> >>>
> >>> Turns out this is not the case, some controllers have a separate
> >>> "supported protocol capability" entry with a PSI table for each port.
> >>> This means each usb3 roothub port can in theory support different custom
> >>> speeds.
> >>>
> >>> To solve this, cache all supported protocol capabilities with their PSI
> >>> tables in an array, and add pointers to the xhci port structure so that
> >>> every port points to its capability entry in the array.
> >>>
> >>> When creating the SuperSpeedPlus USB Device Capability BOS descriptor
> >>> for the xhci USB 3.1 roothub we for now will use only data from the
> >>> first USB 3.1 capable protocol capability entry in the array.
> >>> This could be improved later, this patch focuses resolving
> >>> the memory leak.
> >>>
> >>> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
> >>> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
> >>> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
> >>> Cc: stable <stable@vger.kernel.org> # v4.4+
> >>> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
> >>
> >> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> > 
> > Nice!
> > 
> > Should I revert the first and then apply this?
> > 
> 
> Yes, please

Now done, thanks.

greg k-h
Jon Hunter Feb. 13, 2020, 1:33 p.m. UTC | #5
On 11/02/2020 15:01, Mathias Nyman wrote:
> xhci driver assumed that xHC controllers have at most one custom
> supported speed table (PSI) for all usb 3.x ports.
> Memory was allocated for one PSI table under the xhci hub structure.
> 
> Turns out this is not the case, some controllers have a separate
> "supported protocol capability" entry with a PSI table for each port.
> This means each usb3 roothub port can in theory support different custom
> speeds.
> 
> To solve this, cache all supported protocol capabilities with their PSI
> tables in an array, and add pointers to the xhci port structure so that
> every port points to its capability entry in the array.
> 
> When creating the SuperSpeedPlus USB Device Capability BOS descriptor
> for the xhci USB 3.1 roothub we for now will use only data from the
> first USB 3.1 capable protocol capability entry in the array.
> This could be improved later, this patch focuses resolving
> the memory leak.
> 
> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
> Cc: stable <stable@vger.kernel.org> # v4.4+
> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>


Since next-20200211, we have been observing a regression exiting suspend
on our Tegra124 Jetson TK1 board. Bisect is pointing to this commit and
reverting on top of -next fixes the problem.

On exiting suspend, I am seeing the following ...

[   56.216793] tegra-xusb 70090000.usb: Firmware already loaded, Falcon state 0x20
[   56.216834] usb usb3: root hub lost power or was reset
[   56.216837] usb usb4: root hub lost power or was reset
[   56.217760] tegra-xusb 70090000.usb: No ports on the roothubs?
[   56.218257] tegra-xusb 70090000.usb: failed to resume XHCI: -12
[   56.218299] PM: dpm_run_callback(): platform_pm_resume+0x0/0x40 returns -12
[   56.218312] PM: Device 70090000.usb failed to resume: error -12
[   56.334366] hub 4-0:1.0: hub_ext_port_status failed (err = -32)
[   56.334368] hub 3-0:1.0: hub_ext_port_status failed (err = -32)

Let me know if you have any thoughts on this.

Cheers
Jon
Mathias Nyman Feb. 14, 2020, 7:47 a.m. UTC | #6
On 13.2.2020 15.33, Jon Hunter wrote:
> 
> On 11/02/2020 15:01, Mathias Nyman wrote:
>> xhci driver assumed that xHC controllers have at most one custom
>> supported speed table (PSI) for all usb 3.x ports.
>> Memory was allocated for one PSI table under the xhci hub structure.
>>
>> Turns out this is not the case, some controllers have a separate
>> "supported protocol capability" entry with a PSI table for each port.
>> This means each usb3 roothub port can in theory support different custom
>> speeds.
>>
>> To solve this, cache all supported protocol capabilities with their PSI
>> tables in an array, and add pointers to the xhci port structure so that
>> every port points to its capability entry in the array.
>>
>> When creating the SuperSpeedPlus USB Device Capability BOS descriptor
>> for the xhci USB 3.1 roothub we for now will use only data from the
>> first USB 3.1 capable protocol capability entry in the array.
>> This could be improved later, this patch focuses resolving
>> the memory leak.
>>
>> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
>> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
>> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
>> Cc: stable <stable@vger.kernel.org> # v4.4+
>> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
> 
> 
> Since next-20200211, we have been observing a regression exiting suspend
> on our Tegra124 Jetson TK1 board. Bisect is pointing to this commit and
> reverting on top of -next fixes the problem.
> 
> On exiting suspend, I am seeing the following ...
> 
> [   56.216793] tegra-xusb 70090000.usb: Firmware already loaded, Falcon state 0x20
> [   56.216834] usb usb3: root hub lost power or was reset
> [   56.216837] usb usb4: root hub lost power or was reset
> [   56.217760] tegra-xusb 70090000.usb: No ports on the roothubs?
> [   56.218257] tegra-xusb 70090000.usb: failed to resume XHCI: -12
> [   56.218299] PM: dpm_run_callback(): platform_pm_resume+0x0/0x40 returns -12
> [   56.218312] PM: Device 70090000.usb failed to resume: error -12
> [   56.334366] hub 4-0:1.0: hub_ext_port_status failed (err = -32)
> [   56.334368] hub 3-0:1.0: hub_ext_port_status failed (err = -32)
> 
> Let me know if you have any thoughts on this.
> 
> Cheers
> Jon

This was an issue with the first version, and should be fixed in the second.

next-20200211 has the faulty version, 
next-20200213 is fixed, reverted first version and applied second.

Does next-20200213 work for you?

-Mathias
Jon Hunter Feb. 14, 2020, 8:35 a.m. UTC | #7
On 14/02/2020 07:47, Mathias Nyman wrote:
> On 13.2.2020 15.33, Jon Hunter wrote:
>>
>> On 11/02/2020 15:01, Mathias Nyman wrote:
>>> xhci driver assumed that xHC controllers have at most one custom
>>> supported speed table (PSI) for all usb 3.x ports.
>>> Memory was allocated for one PSI table under the xhci hub structure.
>>>
>>> Turns out this is not the case, some controllers have a separate
>>> "supported protocol capability" entry with a PSI table for each port.
>>> This means each usb3 roothub port can in theory support different custom
>>> speeds.
>>>
>>> To solve this, cache all supported protocol capabilities with their PSI
>>> tables in an array, and add pointers to the xhci port structure so that
>>> every port points to its capability entry in the array.
>>>
>>> When creating the SuperSpeedPlus USB Device Capability BOS descriptor
>>> for the xhci USB 3.1 roothub we for now will use only data from the
>>> first USB 3.1 capable protocol capability entry in the array.
>>> This could be improved later, this patch focuses resolving
>>> the memory leak.
>>>
>>> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
>>> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
>>> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
>>> Cc: stable <stable@vger.kernel.org> # v4.4+
>>> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
>>
>>
>> Since next-20200211, we have been observing a regression exiting suspend
>> on our Tegra124 Jetson TK1 board. Bisect is pointing to this commit and
>> reverting on top of -next fixes the problem.
>>
>> On exiting suspend, I am seeing the following ...
>>
>> [   56.216793] tegra-xusb 70090000.usb: Firmware already loaded, Falcon state 0x20
>> [   56.216834] usb usb3: root hub lost power or was reset
>> [   56.216837] usb usb4: root hub lost power or was reset
>> [   56.217760] tegra-xusb 70090000.usb: No ports on the roothubs?
>> [   56.218257] tegra-xusb 70090000.usb: failed to resume XHCI: -12
>> [   56.218299] PM: dpm_run_callback(): platform_pm_resume+0x0/0x40 returns -12
>> [   56.218312] PM: Device 70090000.usb failed to resume: error -12
>> [   56.334366] hub 4-0:1.0: hub_ext_port_status failed (err = -32)
>> [   56.334368] hub 3-0:1.0: hub_ext_port_status failed (err = -32)
>>
>> Let me know if you have any thoughts on this.
>>
>> Cheers
>> Jon
> 
> This was an issue with the first version, and should be fixed in the second.
> 
> next-20200211 has the faulty version, 
> next-20200213 is fixed, reverted first version and applied second.
> 
> Does next-20200213 work for you?

Yes it does. Sorry I am an idiot and should have read the changes and
thread more closely!

Thanks for fixing so quickly.

Jon
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 7a3a29e5e9d2..af92b2576fe9 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -55,6 +55,7 @@  static u8 usb_bos_descriptor [] = {
 static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
 				     u16 wLength)
 {
+	struct xhci_port_cap *port_cap = NULL;
 	int i, ssa_count;
 	u32 temp;
 	u16 desc_size, ssp_cap_size, ssa_size = 0;
@@ -64,16 +65,24 @@  static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
 	ssp_cap_size = sizeof(usb_bos_descriptor) - desc_size;
 
 	/* does xhci support USB 3.1 Enhanced SuperSpeed */
-	if (xhci->usb3_rhub.min_rev >= 0x01) {
+	for (i = 0; i < xhci->num_port_caps; i++) {
+		if (xhci->port_caps[i].maj_rev == 0x03 &&
+		    xhci->port_caps[i].min_rev >= 0x01) {
+			usb3_1 = true;
+			port_cap = &xhci->port_caps[i];
+			break;
+		}
+	}
+
+	if (usb3_1) {
 		/* does xhci provide a PSI table for SSA speed attributes? */
-		if (xhci->usb3_rhub.psi_count) {
+		if (port_cap->psi_count) {
 			/* two SSA entries for each unique PSI ID, RX and TX */
-			ssa_count = xhci->usb3_rhub.psi_uid_count * 2;
+			ssa_count = port_cap->psi_uid_count * 2;
 			ssa_size = ssa_count * sizeof(u32);
 			ssp_cap_size -= 16; /* skip copying the default SSA */
 		}
 		desc_size += ssp_cap_size;
-		usb3_1 = true;
 	}
 	memcpy(buf, &usb_bos_descriptor, min(desc_size, wLength));
 
@@ -99,7 +108,7 @@  static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
 	}
 
 	/* If PSI table exists, add the custom speed attributes from it */
-	if (usb3_1 && xhci->usb3_rhub.psi_count) {
+	if (usb3_1 && port_cap->psi_count) {
 		u32 ssp_cap_base, bm_attrib, psi, psi_mant, psi_exp;
 		int offset;
 
@@ -111,7 +120,7 @@  static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
 
 		/* attribute count SSAC bits 4:0 and ID count SSIC bits 8:5 */
 		bm_attrib = (ssa_count - 1) & 0x1f;
-		bm_attrib |= (xhci->usb3_rhub.psi_uid_count - 1) << 5;
+		bm_attrib |= (port_cap->psi_uid_count - 1) << 5;
 		put_unaligned_le32(bm_attrib, &buf[ssp_cap_base + 4]);
 
 		if (wLength < desc_size + ssa_size)
@@ -124,8 +133,8 @@  static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
 		 * USB 3.1 requires two SSA entries (RX and TX) for every link
 		 */
 		offset = desc_size;
-		for (i = 0; i < xhci->usb3_rhub.psi_count; i++) {
-			psi = xhci->usb3_rhub.psi[i];
+		for (i = 0; i < port_cap->psi_count; i++) {
+			psi = port_cap->psi[i];
 			psi &= ~USB_SSP_SUBLINK_SPEED_RSVD;
 			psi_exp = XHCI_EXT_PORT_PSIE(psi);
 			psi_mant = XHCI_EXT_PORT_PSIM(psi);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 0e2701649369..884c601bfa15 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1915,17 +1915,17 @@  void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->usb3_rhub.num_ports = 0;
 	xhci->num_active_eps = 0;
 	kfree(xhci->usb2_rhub.ports);
-	kfree(xhci->usb2_rhub.psi);
 	kfree(xhci->usb3_rhub.ports);
-	kfree(xhci->usb3_rhub.psi);
 	kfree(xhci->hw_ports);
 	kfree(xhci->rh_bw);
 	kfree(xhci->ext_caps);
+	for (i = 0; i < xhci->num_port_caps; i++)
+		kfree(xhci->port_caps[i].psi);
+	kfree(xhci->port_caps);
+	xhci->num_port_caps = 0;
 
 	xhci->usb2_rhub.ports = NULL;
-	xhci->usb2_rhub.psi = NULL;
 	xhci->usb3_rhub.ports = NULL;
-	xhci->usb3_rhub.psi = NULL;
 	xhci->hw_ports = NULL;
 	xhci->rh_bw = NULL;
 	xhci->ext_caps = NULL;
@@ -2126,6 +2126,7 @@  static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 	u8 major_revision, minor_revision;
 	struct xhci_hub *rhub;
 	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+	struct xhci_port_cap *port_cap;
 
 	temp = readl(addr);
 	major_revision = XHCI_EXT_PORT_MAJOR(temp);
@@ -2160,31 +2161,39 @@  static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 		/* WTF? "Valid values are ‘1’ to MaxPorts" */
 		return;
 
-	rhub->psi_count = XHCI_EXT_PORT_PSIC(temp);
-	if (rhub->psi_count) {
-		rhub->psi = kcalloc_node(rhub->psi_count, sizeof(*rhub->psi),
-				    GFP_KERNEL, dev_to_node(dev));
-		if (!rhub->psi)
-			rhub->psi_count = 0;
+	port_cap = &xhci->port_caps[xhci->num_port_caps++];
+	if (xhci->num_port_caps > max_caps)
+		return;
+
+	port_cap->maj_rev = major_revision;
+	port_cap->min_rev = minor_revision;
+	port_cap->psi_count = XHCI_EXT_PORT_PSIC(temp);
+
+	if (port_cap->psi_count) {
+		port_cap->psi = kcalloc_node(port_cap->psi_count,
+					     sizeof(*port_cap->psi),
+					     GFP_KERNEL, dev_to_node(dev));
+		if (!port_cap->psi)
+			port_cap->psi_count = 0;
 
-		rhub->psi_uid_count++;
-		for (i = 0; i < rhub->psi_count; i++) {
-			rhub->psi[i] = readl(addr + 4 + i);
+		port_cap->psi_uid_count++;
+		for (i = 0; i < port_cap->psi_count; i++) {
+			port_cap->psi[i] = readl(addr + 4 + i);
 
 			/* count unique ID values, two consecutive entries can
 			 * have the same ID if link is assymetric
 			 */
-			if (i && (XHCI_EXT_PORT_PSIV(rhub->psi[i]) !=
-				  XHCI_EXT_PORT_PSIV(rhub->psi[i - 1])))
-				rhub->psi_uid_count++;
+			if (i && (XHCI_EXT_PORT_PSIV(port_cap->psi[i]) !=
+				  XHCI_EXT_PORT_PSIV(port_cap->psi[i - 1])))
+				port_cap->psi_uid_count++;
 
 			xhci_dbg(xhci, "PSIV:%d PSIE:%d PLT:%d PFD:%d LP:%d PSIM:%d\n",
-				  XHCI_EXT_PORT_PSIV(rhub->psi[i]),
-				  XHCI_EXT_PORT_PSIE(rhub->psi[i]),
-				  XHCI_EXT_PORT_PLT(rhub->psi[i]),
-				  XHCI_EXT_PORT_PFD(rhub->psi[i]),
-				  XHCI_EXT_PORT_LP(rhub->psi[i]),
-				  XHCI_EXT_PORT_PSIM(rhub->psi[i]));
+				  XHCI_EXT_PORT_PSIV(port_cap->psi[i]),
+				  XHCI_EXT_PORT_PSIE(port_cap->psi[i]),
+				  XHCI_EXT_PORT_PLT(port_cap->psi[i]),
+				  XHCI_EXT_PORT_PFD(port_cap->psi[i]),
+				  XHCI_EXT_PORT_LP(port_cap->psi[i]),
+				  XHCI_EXT_PORT_PSIM(port_cap->psi[i]));
 		}
 	}
 	/* cache usb2 port capabilities */
@@ -2219,6 +2228,7 @@  static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 			continue;
 		}
 		hw_port->rhub = rhub;
+		hw_port->port_cap = port_cap;
 		rhub->num_ports++;
 	}
 	/* FIXME: Should we disable ports not in the Extended Capabilities? */
@@ -2309,6 +2319,11 @@  static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 	if (!xhci->ext_caps)
 		return -ENOMEM;
 
+	xhci->port_caps = kcalloc_node(cap_count, sizeof(*xhci->port_caps),
+				flags, dev_to_node(dev));
+	if (!xhci->port_caps)
+		return -ENOMEM;
+
 	offset = cap_start;
 
 	while (offset) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 13d8838cd552..3ecee10fdcdc 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1702,12 +1702,20 @@  struct xhci_bus_state {
  * Intel Lynx Point LP xHCI host.
  */
 #define	XHCI_MAX_REXIT_TIMEOUT_MS	20
+struct xhci_port_cap {
+	u32			*psi;	/* array of protocol speed ID entries */
+	u8			psi_count;
+	u8			psi_uid_count;
+	u8			maj_rev;
+	u8			min_rev;
+};
 
 struct xhci_port {
 	__le32 __iomem		*addr;
 	int			hw_portnum;
 	int			hcd_portnum;
 	struct xhci_hub		*rhub;
+	struct xhci_port_cap	*port_cap;
 };
 
 struct xhci_hub {
@@ -1719,9 +1727,6 @@  struct xhci_hub {
 	/* supported prococol extended capabiliy values */
 	u8			maj_rev;
 	u8			min_rev;
-	u32			*psi;	/* array of protocol speed ID entries */
-	u8			psi_count;
-	u8			psi_uid_count;
 };
 
 /* There is one xhci_hcd structure per controller */
@@ -1880,6 +1885,9 @@  struct xhci_hcd {
 	/* cached usb2 extened protocol capabilites */
 	u32                     *ext_caps;
 	unsigned int            num_ext_caps;
+	/* cached extended protocol port capabilities */
+	struct xhci_port_cap	*port_caps;
+	unsigned int		num_port_caps;
 	/* Compliance Mode Recovery Data */
 	struct timer_list	comp_mode_recovery_timer;
 	u32			port_status_u0;